| 深水自吸式潜水曝气机的设计与试验 |
| |
| 引用本文： | 陈斌,张克危,施卫东,吴钢,黄学军.深水自吸式潜水曝气机的设计与试验[J].排灌机械,2011(5):437-440. |
| |
| 作者姓名： | 陈斌 张克危 施卫东 吴钢 黄学军 |
| |
| 作者单位： | 江苏大学流体机械工程技术研究中心;南京市水泵工程技术研究中心;华中科技大学能源与动力工程学院; |
| |
| 基金项目： | 江苏省企业院士工作站项目(BM2009525) |
| |
| 摘 要： | 为了改进自吸式潜水曝气机的深水曝气性能,提高其浸深充氧能力和动力效率,研究了曝气机性能并设计了新的样机.基于潜水曝气机的结构特点及射流原理,在面积比为2.254,.00,5.06和6.25时,分别改变喷嘴形状、喉嘴距、喉管长度、工作压力和流量,进行了大量的试验,得出了不同面积比下的流量比与压力比曲线.在此基础上,拟合了最佳性能曲线,归纳了设计方法.根据要求的流量比和最佳性能曲线,可以查出对应的压力比和面积比,确定出合理的潜水泵工况和曝气机的几何尺寸,据此设计了新的样机,并对其进行了试验.结果表明：该样机将自吸潜水曝气机的最大潜水深度提高到10 m,在此水压头下,水气混合均匀,射流有力,7.5 kW的功率,进气量达到122 m3/h,产生的气泡细密、均匀,在水下滞留的时间长.
|
| 关 键 词： | 潜水射流曝气机 潜水深度 面积比 试验 |
Design and experiment of deep self-suction submersible aerator |
| |
| Chen Bin,Zhang Kewei,Shi Weidong,Wu Gang,Huang Xuejun.Design and experiment of deep self-suction submersible aerator[J].Drainage and Irrigation Machinery,2011(5):437-440. |
| |
| Authors: | Chen Bin Zhang Kewei Shi Weidong Wu Gang Huang Xuejun |
| |
| Institution: | Chen Bin1,2,Zhang Kewei3,Shi Weidong1,Wu Gang2,Huang Xuejun2 (1.Research Center of Fluid Machinery Engineering and Technology,Jiangsu University,Zhenjiang,Jiangsu 212013,China,2.Pump Engineering and Technology Research Center of Nanjing,Nanjing,Jiangsu 211500,3.School of Energy and Power Engineering,Huazhong University of Science and Technology,Wuhan,Hubei 430074,China) |
| |
| Abstract: | In order to improve the deep aeration performance of a self-priming submersible aerator and improve its oxygenation capacity and power efficiency in deep diving,a new prototype was designed and its performance was researched.Based on the structural character and jet principle of submersible aerator,a series of tests with various nozzle shapes,throat-pipe length,working pressure and flow rates were conducted under different area ratio value of 2.25,4.00,5.06 and 6.25,respectively.The curve of flow ratio and ... |
| |
| Keywords: | submersible jet aerator submerged depth area ratio experiment |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
