| 喂入式立轴甩刀香蕉秸秆粉碎还田机设计与试验 |
| |
| 引用本文： | 甘声豹,李粤,张喜瑞,张国健,王能.喂入式立轴甩刀香蕉秸秆粉碎还田机设计与试验[J].农业工程学报,2014,30(13):10-19. |
| |
| 作者姓名： | 甘声豹 李粤 张喜瑞 张国健 王能 |
| |
| 作者单位： | 1. 海南大学机电工程学院，海口 570228;1. 海南大学机电工程学院，海口 570228;1. 海南大学机电工程学院，海口 570228;2. 海南省锅炉压力容器与特种设备检验所，海口 570203;3.海南金鹿农机发展股份有限公司，海口 571100 |
| |
| 基金项目： | 国家自然科学基金项目（51105123），海南省重点科技计划项目（ZDXM20120074）。 |
| |
| 摘 要： | 由于香蕉秸秆粗大、含水率高,现有的粉碎还田机大多操作繁琐、作业不稳定。针对上述问题,研制了一种喂入式立轴甩刀香蕉秸秆粉碎还田机,描述了该机的总体设计方案及主要部件的结构,分析了各部件之间的相互关系,确定了其关键参数的最优值。试验结果表明:该机在前进速度为2.16~3.60 km/h、压辊进料转速为127.39 r/min、立轴甩刀旋转速度为1 080 r/min时,秸秆粉碎质量合格率达94.9%、田间覆盖率达88.61%、茎杆留茬高度为30~35 mm,一次作业可将秸秆粉碎成丝状残渣,且残渣抛洒还田均匀。试验结果对解决因秸秆难处理而制约农村合作社小规模种植的难题具有重要意义。
|
| 关 键 词： | 农业机械 设计 秸秆 粉碎还田机 立轴甩刀 喂入压辊 丝状残渣 |
| 收稿时间： | 2013/11/22 0:00:00 |
| 修稿时间： | 2014/6/17 0:00:00 |
Design and experiment on banana stalk chopper with feeding type spindle flail |
| |
| Gan Shengbao,Li Yue,Zhang Xirui,Zhang Guojian and Wang Neng.Design and experiment on banana stalk chopper with feeding type spindle flail[J].Transactions of the Chinese Society of Agricultural Engineering,2014,30(13):10-19. |
| |
| Authors: | Gan Shengbao Li Yue Zhang Xirui Zhang Guojian and Wang Neng |
| |
| Institution: | 1. School of Mechanics and Electrics Engineering, Hainan University, Haikou 570228, China;1. School of Mechanics and Electrics Engineering, Hainan University, Haikou 570228, China;1. School of Mechanics and Electrics Engineering, Hainan University, Haikou 570228, China;2. Boiler pressure vessels and special equipment inspection of Hainan province, Haikou 570203, China;3. Hainan Jin Lu Agriculture Mechanism Development, CO.LTD., Haikou 571100, China |
| |
| Abstract: | Abstract: Bananas occupy an extremely important position in the world of fruit trade; it is the most important fruit in tropical and subtropical areas. China is one of the world's largest producers of bananas, and bananas have become an agricultural pillar industry in China's subtropical regions. However, the banana stalks are a major agricultural waste. According to the Food and Agriculture Organization (FAO), in 2010, 24 million tons of annual output of waste is banana straw in China. If such a large amount of waste straw is not handled in time, it would seriously pollute the environment and affect the renewal of the banana plantation. Because banana stalks are thick with a high level of moisture and other issues, there are less mature mechanical equipments for banana stalks treatment at the present. There are usually two main types of banana stalk treatment: one is to cut down and pile the stalk in the fields by laborers, and then let it rot; the other one is a centrally smash processing with machines. This kind of machine can achieve a certain crushing effect, but, due to the characteristics of its own design, can't achieve the field operations, and thus brings great inconvenience for the laborers. In view of above situations, according to craft about the banana stalks' crushing and returning in the field, this study designed a feeding type vertical shaft flail extracting machine for banana stalks' crushing and returning, and expounded the machine's overall configuration and the main components of the structure, and determined the key parameters of the optimal value through the analysis of the relationship between components and performance test. The machine could work directly in the field under the tractor traction, for the stalks to achieve down, tackle, grab, feed, crush and return. Field experiments showed that: with the speed for forwarding at 2.16 - 3.60 km/h, for the feed roller at 127.39 r/min, and for the vertical sling knife at 1080 r/min, this machine could achieve a qualification rate of straw smashing of 94.9%, field coverage of 88.61%, stem stubble height of 30 - 35 mm, energy consumption of 4.625 kg/h, and working efficiency of 0.39 hm2/h. This machine was easy to operate and its crushing effect was satisfactory. Its successful implementation could not only greatly improve the production efficiency, and solve the problem of large-scale banana cultivation facing massive stalks processing, but also prevent the pollution of the environment and had important economic and ecological benefits. |
| |
| Keywords: | agricultural machinery design straw returning grinding machine spindle flail feeding roller filamentous sludge |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业工程学报》浏览原始摘要信息 |
| 点击此处可从《农业工程学报》下载免费的PDF全文 |
|
