| 打叶框栏尺寸对烤烟打叶过程中叶片结构及出片率的影响 |
| |
| 引用本文： | 蔡联合,邹克兴,孙建生,李季刚,王宏生,陶和德,陆志国,梁伟.打叶框栏尺寸对烤烟打叶过程中叶片结构及出片率的影响[J].湖南农业科学,2017(8). |
| |
| 作者姓名： | 蔡联合 邹克兴 孙建生 李季刚 王宏生 陶和德 陆志国 梁伟 |
| |
| 作者单位： | 1. 广西中烟工业有限责任公司,广西 南宁,530001;2. 中国烟草总公司郑州烟草研究院,河南 郑州,450001;3. 贵州复烤有限责任公司黔西南复烤厂,贵州 兴义,562400;4. 云南烟叶复烤公司文山复烤厂,云南 文山,566300 |
| |
| 摘 要： | 为探讨打叶框栏尺寸对加工片烟叶片结构及出片率的影响,开展了一定范围内(7.0~8.9 cm)不同一打框栏尺寸的对比试验。结果表明:在一定范围内,当一打框栏尺寸缩减时,加工后片烟烤前与烤后烟叶的大片率均有所降低,但整体降低幅度不大;烤前与烤后片烟中大片烟叶在大中片烟叶中的比例亦有小幅度降低,但降低幅度有限;缩减打叶复烤环节一打的框栏尺寸,烟叶的造碎有所增加,出片率小幅降低,但均在可控的范围内。
|
| 关 键 词： | 烤烟 打叶复烤 框栏尺寸 叶片结构 出片率 |
Influence of Frame Size in Threshing Process on Leaf Strip Structure and Strips Yield in Tobacco |
| |
| CAI Lian-he,ZOU Ke-xing,SUN Jian-sheng,LI Ji-gang,WANG Hong-sheng,TAO He-de,LU Zhi-guo,LIANG Wei.Influence of Frame Size in Threshing Process on Leaf Strip Structure and Strips Yield in Tobacco[J].Hunan Agricultural Sciences,2017(8). |
| |
| Authors: | CAI Lian-he ZOU Ke-xing SUN Jian-sheng LI Ji-gang WANG Hong-sheng TAO He-de LU Zhi-guo LIANG Wei |
| |
| Abstract: | In order to test the influence of the threshing frame size on tobacco leaf strip structure and strips output in the threshing and re-drying, a comparative experiment was conducted on different frame sizes at 7.0-8.9 cm in this study. The results showed that when the frame size was reduced in certain range, the large tobacco leaf strip rate decreased before and after baking, but the overall decrease was slight; before and after baking the proportion of the large tobacco leaf strips in the medium and large tobacco leaf strips had decreased, but the decrease was limited; and reducing the first frame size in the threshing and re-baking increased broken tobacco leaves and decreased the strips yield slightly in the controlled range. |
| |
| Keywords: | flue-cured tobacco threshing and re-drying frame column size leaf strip structure strips yield |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
