| 基于Kane方程的冗余驱动5UPS/PRPU并联机床动力学分析 |
| |
| 引用本文： | 鹿玲,姚建涛,顾伟栋,梁龙晓,许允斗,赵永生.基于Kane方程的冗余驱动5UPS/PRPU并联机床动力学分析[J].农业机械学报,2016,47(6):366-372. |
| |
| 作者姓名： | 鹿玲 姚建涛 顾伟栋 梁龙晓 许允斗 赵永生 |
| |
| 作者单位： | 燕山大学,燕山大学,燕山大学,燕山大学,燕山大学,燕山大学 |
| |
| 基金项目： | 国家自然科学基金项目（51275439） |
| |
| 摘 要： | 为了解决冗余驱动并联机构的驱动力协调问题,搭建基于动力学的控制系统,实现冗余驱动并联机床的力位混合控制,以原有5UPS/PRPU并联机床为研究对象,改变中间PRPU约束分支为冗余驱动分支,构成冗余驱动并联机床,在其运动学分析的基础上,采用计算效率较高的Kane方法建立了该并联机床的动力学模型;应用ADAMS软件仿真得出驱动力并与Kane动力学模型求解出的驱动力进行比较,验证了Kane动力学模型的正确性,为冗余驱动并联机床力位混合控制研究奠定了理论基础。
|
| 关 键 词： | 并联机床 Kane方程 动力学 仿真分析 |
| 收稿时间： | 2015/11/29 0:00:00 |
Dynamics Analysis of 5UPS/PRPU Parallel Machine Tool with Redundant Actuation Based on Kane Equation |
| |
| Lu Ling,Yao Jiantao,Gu Weidong,Liang Longxiao,Xu Yundou and Zhao Yongsheng.Dynamics Analysis of 5UPS/PRPU Parallel Machine Tool with Redundant Actuation Based on Kane Equation[J].Transactions of the Chinese Society of Agricultural Machinery,2016,47(6):366-372. |
| |
| Authors: | Lu Ling Yao Jiantao Gu Weidong Liang Longxiao Xu Yundou and Zhao Yongsheng |
| |
| Institution: | Yanshan University,Yanshan University,Yanshan University,Yanshan University,Yanshan University and Yanshan University |
| |
| Abstract: | In order to further study and solve the problems of the driving force coordination of parallel machine tool with redundant actuation, build a control system based on dynamics and realize the force-position hybrid control, the original 5UPS/PRPU parallel machine tool was taken as research object, and a drive for middle PRPU constraint branch was increased to make it a redundant actuation branch. Finally, the 5UPS/PRPU parallel machine tool with redundant actuation was built. The Kane equation of higher computation efficiency was taken to establish the dynamics model. The mechanical structure was introduced, the kinematics property of the parallel machine tool was analyzed from the three aspects of speed, partial speed and acceleration. The dynamics model of the system was established, and the redundant driving force was solved. By using ADAMS software, the no-load translation example driving force was simulated and compared with the no-load translation example driving force obtained by Kane dynamic model of the parallel machine tool. The results showed that the simulated and calculated driving forces were very similar, the maximum deviation absolute value was only 0.068N. It proved the validity of Kane dynamical model and obtained the mechanism of driving force coordination and distribution. Redundant actuation can effectively reduce the peak value of driving force of the parallel machine tool and make the driving forces change slowly during the motion process. Besides, it has the advantages of high rigidity, high bearing capacity, good stability and so on. The correct establishment of the dynamic model was the prerequisite of realizing real-time control strategy. It was of great significance to the research on redundant actuation of the parallel machine tool. |
| |
| Keywords: | parallel machine tool Kane equation dynamics simulation analysis |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
|
