| 马铃薯挖掘铲计算机辅助分析与模拟试验研究 |
| |
| 引用本文： | 贾晶霞,张东兴,桑永英,杨欣.马铃薯挖掘铲计算机辅助分析与模拟试验研究[J].农业工程学报,2006,22(8):106-110. |
| |
| 作者姓名： | 贾晶霞 张东兴 桑永英 杨欣 |
| |
| 作者单位： | 1. 中国农业大学工学院,北京,100083
2. 河北农业大学机电工程学院,保定,071001 |
| |
| 摘 要： | 针对马铃薯挖掘铲工作阻力大这一难题，采用参数化特征造型软件Inventor进行挖掘铲虚拟设计，基于土壤与铲体作用动力学分析，建立了挖掘铲牵引阻力数学模型。通过计算机辅助分析(Computer Aided Analysis，CAA)手段，使用Visual Basic语言编程实现了挖掘铲牵引阻力与前进速度、铲面倾角、挖掘深度、工作幅宽等主要影响因素的模拟试验，最终确定了挖掘铲设计参数，并在虚拟装配体中进行参数调整改进模型。土槽台架试验结果与计算机模拟试验结果基本吻合，验证了CAA过程和模拟试验的有效性，田间收获试验结果显示马铃薯收获质量达到了设计要求，验证了挖掘铲几何参数的合理性。研究结果为其它农机具研究设计提供了一种参考。
|
| 关 键 词： | 农业机械 马铃薯收获 挖掘铲 虚拟设计 计算机辅助分析(CAA) 模拟试验 |
| 文章编号： | 1002-6819(2006)08-0106-05 |
| 收稿时间： | 2005-01-10 |
| 修稿时间： | 2005-12-26 |
Computer aided analysis and simulation experiment of potato digging blade |
| |
| Jia Jingxi,Zhang Dongxing,Sang Yongying and Yang Xin.Computer aided analysis and simulation experiment of potato digging blade[J].Transactions of the Chinese Society of Agricultural Engineering,2006,22(8):106-110. |
| |
| Authors: | Jia Jingxi Zhang Dongxing Sang Yongying and Yang Xin |
| |
| Institution: | College of Engineering, China Agricultural University, Beijing 100083, China;College of Engineering, China Agricultural University, Beijing 100083, China;College of Engineering, China Agricultural University, Beijing 100083, China;College of Mechanical and Electrical Engineering, Agricultural University of Hebei, Baoding 071001, China |
| |
| Abstract: | In order to solve the problem of big resistance in digging potatoes, the virtual design of digging blade was made by using Inventor, a parameter feature modeling software, and the draught resistance mathematic model was set up based on dynamics analysis of digging blade and soil. Simulation tests between the resistance and the main factors, such as working velocity, obliquity of blade, digging depth, digging breadth, were done by visual basic on Computer Aided Analysis(CAA), the design parameters of digging blade were confirmed and put into the virtual model to redesign the digging blade, at last the digging blade was manufactured, the draught resistance tests in the soil groove and the harvesting tests in the field were carried out. The draught resistances were consistent basically between the simulation tests and the soil groove tests, which showed that the CAA program and the simulation tests were effective and feasible. The field harvesting test results show that the harvest quality is better, these results also prove that the digging blade parameters are reasonable. This method, through CAA, simulation tests, and virtual design, may provide a reference for other agricultural machine design. |
| |
| Keywords: | agricultural machine potato harvesting digging blade virtual design CAA simulation test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业工程学报》浏览原始摘要信息 |
| 点击此处可从《农业工程学报》下载免费的PDF全文 |
|
