| 选择性激光烧结金属粉末材料的研究进展 |
| |
| 引用本文： | 任乃飞,曹松.选择性激光烧结金属粉末材料的研究进展[J].农业机械学报,2005,36(8):147-150,153. |
| |
| 作者姓名： | 任乃飞 曹松 |
| |
| 作者单位： | 江苏大学机械工程学院 |
| |
| 基金项目： | 江苏省汽车工程重点实验室开放基金资助项目（项目编号：KJs02078）和江苏省精细石油化工重点实验室开放基金资助项目（项目编号：KJS02109） |
| |
| 摘 要： | 综述国内外选择性激光烧结金属粉末材料研究的发展现状和存在问题，论述纳米粉末材料选择性激光烧结的优点和难点，展望选择性激光烧结金属粉末材料的发展趋势。在此基础上，分析了研究开发选择性激光烧结覆膜金属纳米粉末材料的可行性，并提出一种选择性激光烧结覆膜金属纳米粉末材料成型金属件的思路。
|
| 关 键 词： | 选择性激光烧结 快速成形 金属粉末 纳米材料 |
| 收稿时间： | 06 12 2004 12:00AM |
| 修稿时间： | 2004-06-12 |
Research Advances of Metallic Powder Materials by Selective Laser Sintering |
| |
| Ren Naifei,Cao Song.Research Advances of Metallic Powder Materials by Selective Laser Sintering[J].Transactions of the Chinese Society of Agricultural Machinery,2005,36(8):147-150,153. |
| |
| Authors: | Ren Naifei Cao Song |
| |
| Institution: | Jiangsu University |
| |
| Abstract: | Research progresses and the existing problems on metallic powder materials by selective laser sintering (SLS) at home and abroad were reviewed, advantages and difficulties of nano powder materials by SLS were treated, the development trends of metallic powder materials by SLS were also predicted at the same time. Based on all the above, feasibility of developing coated metallic nano powder materials by SLS was analyzed; at last an idea of prototyping metallic parts with coated metallic nano powder materials by SLS was put forward. |
| |
| Keywords: | Selective laser sintering Rapid prototyping Metallic powder Nano materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
