| 自动施肥系统开发与性能测试 |
| |
| 引用本文： | 李明仁,芦阳,李东燕,张万罡,马庆安,贺正,刘扬,马富裕.自动施肥系统开发与性能测试[J].新疆农业科学,2021,58(12):2228-2235. |
| |
| 作者姓名： | 李明仁 芦阳 李东燕 张万罡 马庆安 贺正 刘扬 马富裕 |
| |
| 作者单位： | 1.石河子大学农学院/新疆生产建设兵团绿洲生态农业重点实验室,新疆石河子 8320032.现代农业生产信息化管理与应用技术国家地方联合工程研究中心(新疆兵团),新疆石河子 832003 |
| |
| 基金项目： | 国家重点研发计划(2017YFD0201904);兵团重大科技计划(2018AA00403);兵团重点领域科技计划(2020AB017,2020AB018)(2020AB017);兵团重点领域科技计划(2020AB017,2020AB018)(2020AB018) |
| |
| 摘 要： | 目的 开发一种适应于以固态水溶肥为原料的自动施肥系统,测试分析自动施肥系统性能。方法 主控机采用ARM9电路控制模块可实现对轮灌编组、预搅拌时长、施肥开始与结束时间、施肥持续时长、施肥量等参数的设置;选择以蠕动泵为注肥装置,通过变频器控制注肥泵电机功率的方式控制注肥速率,控制施肥量。对装置核心部件搅拌器额定功率、计量方式、溶肥搅拌参数、排肥速度及固液相比例等主要参数等进行设计与测试。结果 电感脉冲计量方式标准误差最大值1.26%,误差小、性价比好,确定其为本装置采用的计量方式;搅拌器以1.5 Kw额定功率、38 r/min转速搅拌、肥液浓度在1.1~1.3 g/mL、预搅拌时间30 min时,罐内各液位输出肥液浓度值差异不显著(P< 0.05),达到对肥料浓度均匀性的设计要求。结论 将施肥开始前的预搅拌时间设为30 min、搅拌转速设为38 r/min、肥液浓度不高于1.3 g/mL,输出肥液浓度有较好的均匀性,实现精准施肥。
|
| 关 键 词： | 自动施肥系统 施肥精度 肥液浓度 搅拌时间 搅拌转速 |
| 收稿时间： | 2020-05-19 |
Development and Performance Test of Auto-Control Fertilization Equipment |
| |
| LI Mingren,LU Yang,LI Dongyan,ZHANG Wangang,MA Qingan,HE Zheng,LIU Yang,MA Fuyu.Development and Performance Test of Auto-Control Fertilization Equipment[J].Xinjiang Agricultural Sciences,2021,58(12):2228-2235. |
| |
| Authors: | LI Mingren LU Yang LI Dongyan ZHANG Wangang MA Qingan HE Zheng LIU Yang MA Fuyu |
| |
| Institution: | 1. Key Laboratory of Oasis Eco-Agriculture of XPCC/ College of Agronomy, Shihezi University, Shihezi Xinjiang 832003, China2. National and Local Joint Engineering Research Center for Modern Agricultural Production Information Management and Application Technology (Xinjiang Corps), Shihezi Xinjiang 832003, China |
| |
| Abstract: | 【Objective】 Development and Performance Test of Auto-Control Fertilization Equipment.In this paper, an automatic fertilization system of fertigation for solid soluble fertilizer was developed and its performance was tested. 【Methods】 The system was composed of the mainframe and fertilizer storage mixing assembly. ARM9 circuit control module was used to complete the setting of rotational irrigation grouping, premixing time, beginning and end time of fertilization, duration of fertilization, and fertilizer amount. It was equipped with a screw pump as fertilizer injection device, a transducer control regulating the motor power of fertilizer injection pump, and then the amount of fertilizer application was controlled. This paper mainly designed and tested the main parameters that would affect the performance of the device, such as the measurement method, the mixing parameters of dissolved fertilizer, the discharging speed of fertilizer and the ratio of liquid to solid. 【Results】 The results showed that among the three alternative metering methods (timing metering, flowmeter metering and pulse metering), the standard error of inductive pulse metering method was the lowest, which was ±0.83L/50L, and met the control requirements of error design. Therefore, it was determined as the metering method adopted by this device. By the stirring system with 38 r/min, the concentration of fertilizer solution with 1.1-1.3 g/mL, and the premixing time with 30 min, there was no significant difference (P < 0.05) of the concentration of fertilizer solution at each liquid level in the tank. 【Conclusion】 Therefore, the machine designed in this paper can greatly improve the automation level for fertigation and reduce the labor intensity of fertilization in field crop. It has broad applicability and popularity in our facility crop production. |
| |
| Keywords: | automatic fertilization system fertilization precision fertilizer concentration churning time speed of agitator |
|
| 点击此处可从《新疆农业科学》浏览原始摘要信息 |
| 点击此处可从《新疆农业科学》下载免费的PDF全文 |
|
