| 三连栋日光温室拱式桁架结构静力分析与结构优化 |
| |
| 引用本文： | 郄丽娟,赵献辉,许广义,赵付江,韩晓倩,尹庆珍,韩建会.三连栋日光温室拱式桁架结构静力分析与结构优化[J].中国农学通报,2014,30(35):242-247. |
| |
| 作者姓名： | 郄丽娟 赵献辉 许广义 赵付江 韩晓倩 尹庆珍 韩建会 |
| |
| 作者单位： | (;1.河北省农林科学院经济作物研究所,石家庄 050051；;2.河北工业大学土木工程学院,天津 300401；;3.石家庄城市职业学院,石家庄 050051；;4.河北政法职业学院,石家庄 050061） |
| |
| 基金项目： | 基金项目：“十二五”农村领域国家科技计划课题“北方设施蔬菜高效节能生产关键技术研究与集成”(2011BAD12B03)；河北省科技支撑计划“多连栋日光温室优化设计与控制技术”(11220702D)；国家大宗蔬菜产业技术体系石家庄综合试验站(CARS-2S-G-05)。 |
| |
| 摘 要： | 为研究三连栋日光温室的合理性和安全性，通过有限元软件ANSYS对某三连栋日光温室拱式桁架结构进行了三维空间建模，并对该结构在多种荷载组合工况下进行静力分析，探讨了计算方法和结构的优化方法。结果表明：该温室结构吊物拉杆挠度偏大，不能满足设计要求。在原结构的基础上对有竖向拉杆的优化结构进行了计算分析，计算结果与理论值较吻合，且设计安全合理。研究结果为拟建者温室建模和温室结构优化提供参考。
|
| 关 键 词： | 双孢蘑菇 双孢蘑菇 野生菌株 四孢变种 配对杂交 |
| 收稿时间： | 2014/3/31 0:00:00 |
| 修稿时间： | 2014/3/31 0:00:00 |
Static Analysis of Truss Type Steel Structure for Three-span Sunlight Greenhouse |
| |
| Qie Lijuan,Zhao Xianhui,Xu Guangyi,Zhao Fujiang,Han Xiaoqian,Yin Qingzhen and Han Jianhui.Static Analysis of Truss Type Steel Structure for Three-span Sunlight Greenhouse[J].Chinese Agricultural Science Bulletin,2014,30(35):242-247. |
| |
| Authors: | Qie Lijuan Zhao Xianhui Xu Guangyi Zhao Fujiang Han Xiaoqian Yin Qingzhen and Han Jianhui |
| |
| Institution: | (;1.Institute of Cash Crops, Hebei Academy of Agriculture and Forestry Sciences, Shijiazhuang 050051;2.School of Civil Engineering, Hebei University of Technology, Tianjin 300401;3.Shijiazhuang City Career Academy, Shijiazhuang 050051;4.Hebei Professional College of Political Science and Law, Shijiazhuang 050061) |
| |
| Abstract: | In order to study the rationality and safety of three-span greenhouse, three-dimensional model of a three-span arch truss greenhouse structure was built by the finite element software ANSYS, and the static analysis of the structure was done under a variety of load combinations, its calculation and optimized method were discussed. The results showed that the horizontal rods displacement was too large to meet the design requirements. Based on previous structure, an optimized structure was calculated and analyzed with vertical rods. And the results was closed to the theorical results, moreover, the design was safe and reasonable. The study provided a modeling reference for the new greenhouse and the optimized structure. |
| |
| Keywords: | three-span sunlight greenhouse three-dimensional model finite element method static analysis the optimized structure |
|
| 点击此处可从《中国农学通报》浏览原始摘要信息 |
| 点击此处可从《中国农学通报》下载免费的PDF全文 |
|
