| 生物炭负载Fe3O4纳米粒子的制备与表征 |
| |
| 引用本文： | 江美琳,金辉,邓聪,王思.生物炭负载Fe3O4纳米粒子的制备与表征[J].农业环境科学学报,2018,37(3):592-597. |
| |
| 作者姓名： | 江美琳 金辉 邓聪 王思 |
| |
| 作者单位： | 中山大学环境科学与工程学院, 广州 510275;广东省环境污染控制与修复技术重点实验室, 广州 510275,中山大学环境科学与工程学院, 广州 510275;广东省环境污染控制与修复技术重点实验室, 广州 510275,中山大学环境科学与工程学院, 广州 510275,中山大学环境科学与工程学院, 广州 510275 |
| |
| 摘 要： | 为了推进可再生资源的综合利用,本文以水稻秸秆为原料,利用高温热解有机前驱体法成功制备磁性Fe_3O_4纳米粒子/生物炭复合材料。用X射线衍射仪(XRD)、傅立叶变换红外光谱仪(FT-IR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、热重分析仪(TG)、综合物性测量系统(PPMS)、元素分析仪(EA)、电感耦合等离子体原子发射光谱仪(ICP-OES)及全自动快速比表面与孔隙度分析仪(BET)对其进行了表征。结果表明:复合材料上生成了形貌均一、结晶度较高、粒径范围为3~10 nm的Fe_3O_4纳米粒子;复合材料的饱和磁化强度达到26.64 emu·g~(-1);复合材料相比于原始生物炭具有更好的热稳定性和更大的比表面积;复合材料的微孔数量少于原始生物炭,孔隙结构以中大孔为主;铁元素在复合材料上的含量为12.08 mg·g~(-1)。通过对两种材料物理化学性质的比较与归纳,以期为复合材料的合成及应用提供参考。
|
| 关 键 词： | 生物炭 纳米四氧化三铁 磁性 |
| 收稿时间： | 2017/9/17 0:00:00 |
Preparation and characterization of nanoparticles containing Fe3O4 cores in biochar |
| |
| JIANG Mei-lin,JIN Hui,DENG Cong and WANG Si.Preparation and characterization of nanoparticles containing Fe3O4 cores in biochar[J].Journal of Agro-Environment Science( J. Agro-Environ. Sci.),2018,37(3):592-597. |
| |
| Authors: | JIANG Mei-lin JIN Hui DENG Cong and WANG Si |
| |
| Institution: | School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China;Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou 510275, China,School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China;Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou 510275, China,School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China and School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China |
| |
| Abstract: | This study successfully prepared magnetic Fe3O4 nanoparticles/biochar composite materials(MB) using rice straw as a raw material and the pyrolysizing organic precursor method at high temperature to promote the comprehensive utilization of renewable resources. MB was characterized using X-ray powder diffraction(XRD), Fourier transformed-infrared spectroscopy(FT-IR), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TG), physical property measurement system(PPMS), elemental analyses(EA), inductively coupled plasma-atomic emission spectrometry(ICP-OES), and the automatic surface area and pore size analyzer(BET). The results showed that Fe3O4 nanoparticles with uniform morphology, high crystallinity, and particle size ranging from 3~10 nm were formed on the composite material, and the saturation magnetization reached 26.64 emu·g-1. In addition, the MB had better thermal stability and greater surface specific area than the original biochar(BC). The number of micropores in the MB was less than that in BC, and the pore structure was mainly mesopore. The Fe content in the MB was 12.08 mg·g-1. This comparison and summary of the physicochemical properties of these two materials provides a reference for the synthesis and application of composite materials. |
| |
| Keywords: | biochar nanoparticles Fe3O4 magnetic |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业环境科学学报》浏览原始摘要信息 |
| 点击此处可从《农业环境科学学报》下载免费的PDF全文 |
|
