| 汽车ABS控制器模拟测试系统硬件接口设计与实现 |
| |
| 引用本文： | 朱占胜,彭美春,曹华,林怡青,刘小康.汽车ABS控制器模拟测试系统硬件接口设计与实现[J].农业机械学报,2006,37(5):144-147. |
| |
| 作者姓名： | 朱占胜 彭美春 曹华 林怡青 刘小康 |
| |
| 作者单位： | 1. 广东工业大学机电工程学院
2. 华南理工大学机电工程学院 |
| |
| 摘 要： | 研究了汽车防抱死制动系统(ABS)控制器模拟测试技术。基于M CS 51单片机系统,开发了一种适合微机与ABS控制器之间通信的I/O接口,能实现ABS轮速信号与阀控信号的采集与传输,并对信号进行分析处理,从而实现ABS控制器的性能测试。
|
| 关 键 词： | 汽车 防抱死制动系统 控制器 模拟测试系统 I/O接口 |
| 收稿时间： | 01 24 2005 12:00AM |
| 修稿时间： | 2005年1月24日 |
Design and Realization of Hardware Interface in Simulation Test System of Automobile ABS ECU |
| |
| Zhu Zhansheng,Peng Meichun,Cao Hua,Lin Yiqing,Liu Xiaokang.Design and Realization of Hardware Interface in Simulation Test System of Automobile ABS ECU[J].Transactions of the Chinese Society of Agricultural Machinery,2006,37(5):144-147. |
| |
| Authors: | Zhu Zhansheng Peng Meichun Cao Hua Lin Yiqing Liu Xiaokang |
| |
| Institution: | 1.Guangdong University of Technology 2.South China University of Technology |
| |
| Abstract: | In this paper a simulation test technology for automobile ABS ECU was studied.A model of I/O interface used for communicating between PC and ECU based on the exploitation of MCS51 single chip system was developed.It can send and collect vehicle roller speed signal and control signal of electromagnetic valve of ABS pressure adjustor in real-time,and calculate and dispose.Thus,realized the performance test of ABS ECU is realized. |
| |
| Keywords: | Automobile ABS ECU Simulation test system I/O interface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
