首页 | 本学科首页   官方微博 | 高级检索  
     检索      

预热时间对柞木干燥质量的影响
引用本文:吕蕾,周亚菲,崔立东,时兰翠.预热时间对柞木干燥质量的影响[J].林业机械与木工设备,2014(7):40-42.
作者姓名:吕蕾  周亚菲  崔立东  时兰翠
作者单位:[1]中国林业科学研究院木材工业研究所,北京100091 [2]黑龙江省木材科学研究所,黑龙江哈尔滨150081
基金项目:黑龙江省财政厅自拟项目“节能预处理与木材干燥相关性的研究”(201008)
摘    要:以硬阔叶材柞木为研究对象,通过研究预热处理时间对锯材干燥质量和干燥速度的影响为制定节能预处理干燥工艺提供依据。结果表明:在相同条件下,25 mm厚的柞木锯材经常规预热处理(预热3.25 h)与预热2 h的干燥速度之间没有明显差异;预热2 h的锯材干燥质量能够达到GB/T 6491-2012《锯材干燥质量》规定的二级标准。

关 键 词:柞木  预热  干燥工艺  干燥质量  干燥速度

Influence of Pre-heating Time on Oak Drying Quality
LV Lei,ZHOU Ya-fei,CUI Li-dong,SHI Lan-cui.Influence of Pre-heating Time on Oak Drying Quality[J].Forestry Machinery & Woodworking Equipment,2014(7):40-42.
Authors:LV Lei  ZHOU Ya-fei  CUI Li-dong  SHI Lan-cui
Institution:1.Research Institute of Wood Industry, CAF, Beijing 100091, China; 2.Heilongjiang Institute of Wood Science, Harbin Heilongjiang 150081, China)
Abstract:With hardwood oak as research object, the effect of preheating processing time on sawn timber drying quality and drying speed is studied to provide basis for energy-saving pretreatment drying process. The result shows that under the same working conditions, there is no significant difference in the drying speed of 25 mm thick oak sawn lumber that has gone through conventional preheat treatment(3.25 h preheat) and 2 h preheat;the drying quality of sawn timber that goes through 2 h preheat can reach the Grade II standard of GB/T 6491 Sawn Timber Drying Quality.
Keywords:oak  preheat  drying technology  drying quality  drying speed
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号