| 削茧机研制初报 |
| |
| 引用本文： | 胡祚忠,杜周和,白胜,王应和,曾华明,潘荣,潘杰.削茧机研制初报[J].蚕业科学,2002,28(4):352-355. |
| |
| 作者姓名： | 胡祚忠 杜周和 白胜 王应和 曾华明 潘荣 潘杰 |
| |
| 作者单位： | 1. 四川省农业科学院蚕业研究所,南充,637000
2. 四川省蚕种管理总站 |
| |
| 基金项目： | 国家茧丝绸风险基金项目 ( 2 0 0 0 4 6 3) |
| |
| 摘 要： | 削茧机改手工削茧为机械削茧。采用弹簧控制自动开合夹具、圆盘旋转送茧、蚕茧在垂直偏水平 40°时高速切削等技术 ,使蛹体在垂直向下时脱出 ,随后驱壳而实现自动切削和蛹壳分离。蚕种场试用 ,其削茧速度可达10kg/h ,伤蛹率低于手工削茧。
|
| 关 键 词： | 削茧机 圆盘送茧 竖直切削 伤蛹率 |
| 修稿时间： | 2002年2月1日 |
Preliminary Report on A Cocoon Cutting Machine |
| |
| Hu Zuozhong,Du Zhouhe,Bai Sheng,Wang Yinghe.Preliminary Report on A Cocoon Cutting Machine[J].Acta Sericologica Sinica,2002,28(4):352-355. |
| |
| Authors: | Hu Zuozhong Du Zhouhe Bai Sheng Wang Yinghe |
| |
| Abstract: | A cocoon cutting machine has been developed in order to cut cocoon by machine instead of by manual operation.The openning and shutting of the fixtures is controlled by springs automatically.The cocoon is transported by spinning plate and cut at an angle of 40 degrees.Pupae drops down at the vertical position.The cutting speed is 10 kg/h and the rate of harmed pupae is lower than that of manual operation. |
| |
| Keywords: | Cocoon cutting machine Cocoon transportion on spinning plate Vertical cutting Rate of harmed pupae |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
