| 单板纵向刨切背面裂隙形成及影响因素 |
| |
| 引用本文： | 李伟光,曹平祥,王宝金,郭晓磊,丁建文.单板纵向刨切背面裂隙形成及影响因素[J].木材工业,2010,24(2). |
| |
| 作者姓名： | 李伟光 曹平祥 王宝金 郭晓磊 丁建文 |
| |
| 作者单位： | 南京林业大学,江苏南京,210037 |
| |
| 基金项目： | “十一五”国家科技支撑计划项目(2006BAD18B06) |
| |
| 摘 要： | 利用摄像机拍摄单板的刨切过程,及采用放大镜观察纵向刨切单板背面裂隙度。采用正交试验,分析了单板刨切厚度、刃倾角和刨切速度对单板背面裂隙的影响。结果表明:单板背面裂隙度随着刨切厚度、刃倾角和刨切速度的增加,都有不同程度的增加,而刨切厚度对单板背面裂隙度影响显著。
|
| 关 键 词： | 纵向刨切 背面裂隙 刨切厚度 |
Forming and Influencing Factors of Veneer Back Clearance during Longitudinal Slicing |
| |
| LI Wei-guang,CAO Ping-xiang,WANG Bao-jin,GUO Xiao-lei,DING Jian-wen.Forming and Influencing Factors of Veneer Back Clearance during Longitudinal Slicing[J].China Wood Industry,2010,24(2). |
| |
| Authors: | LI Wei-guang CAO Ping-xiang WANG Bao-jin GUO Xiao-lei DING Jian-wen |
| |
| Institution: | Nanjing forestry University/a>;Nanjing 210037/a>;Jiangsu/a>;China |
| |
| Abstract: | A typical process for slicing oak veneer was recorded using a camera with a magnifier.The development and formation of back clearance were described,and observed and analyzed during slicing.We found that cutting thickness,inclination angle,and cutting speed were the major factors influencing veneer back clearance during slicing. |
| |
| Keywords: | longitudinal slicing back clearance veneer thickness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
