| 某发动机排气歧管流场分析与结构优化 |
| |
| 引用本文： | 黄泽好,张浩亮,孙章栋,董腾鲜.某发动机排气歧管流场分析与结构优化[J].西南农业大学学报,2011,33(1). |
| |
| 作者姓名： | 黄泽好 张浩亮 孙章栋 董腾鲜 |
| |
| 作者单位： | 重庆理工大学重庆汽车学院; |
| |
| 摘 要： | 首先建立某发动机排气歧管的三维模型,利用有限元前处理软件Hypermesh划分网格,用有限元方法分析各缸对应支管的单管流速分布和三元催化剂前端截面的流速分布,并根据分析结果对排气歧管进行结构优化,改进后的排气歧管在各缸流量均匀性、减小流通阻力、漩涡消失、气流噪声和能量损失方面取得较明显的效果.
|
| 关 键 词： | 排气歧管 有限元 流场分析 优化 |
Analysis of Flow Field of an Engine Exhaust Manifold and Structure Optimization |
| |
| HUANG Ze-hao,ZHANG Hao-liang,SUN Zhang-dong,DONG Teng-xianChongqing University of Technology,Chongqing ,China.Analysis of Flow Field of an Engine Exhaust Manifold and Structure Optimization[J].Journal of Southwest Agricultural University,2011,33(1). |
| |
| Authors: | HUANG Ze-hao ZHANG Hao-liang SUN Zhang-dong DONG Teng-xianChongqing University of Technology Chongqing China |
| |
| Institution: | HUANG Ze-hao,ZHANG Hao-liang,SUN Zhang-dong,DONG Teng-xianChongqing University of Technology,Chongqing 400050,China |
| |
| Abstract: | This paper establishes a three-dimensional model of the engine exhaust manifold.Then meshing is made with finite element software Hypermesh,and FEM(Finite element method) is used to analyze each single pipe's velocity distribution of the corresponding branch pipe of each cylinder and the front-end section velocity distribution of the three-way catalyst.Based on the results of the analyses,structural optimization is made for the exhaust manifold.Significant improvement is achieved in cylinder flow uniformity... |
| |
| Keywords: | exhaust manifold finite element analysis flow field analysis optimization |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《西南农业大学学报》浏览原始摘要信息 |
| 点击此处可从《西南农业大学学报》下载免费的PDF全文 |
|
