| 三维数值模拟扩压管锥角对涡流管性能影响 |
| |
| 引用本文： | 陈玉平,仲梁维.三维数值模拟扩压管锥角对涡流管性能影响[J].农业装备与车辆工程,2021(1). |
| |
| 作者姓名： | 陈玉平 仲梁维 |
| |
| 作者单位： | 上海理工大学机械工程学院 |
| |
| 摘 要： | 为研究涡流管冷端扩压管锥角对其性能的影响,进一步优化涡流管的结构参数,基于SolidWorks建立三维模型,利用软件Fluent,采用Standard k-ε湍流模型模拟涡流管管内气体流场,得到锥角5°,10°,15°,20°下冷端管的压力、速度、温度云图,当锥角大于15°时,分离效率开始下降,且冷端出口温度随着锥角增大逐渐升高,涡流管锥角不宜超过15°。
|
| 关 键 词： | 涡流管 锥角 数值模拟 分离效率 |
Three-dimensional Numerical Simulation of Influence of Diffuser Cone Angle on Vortex Tube Performance |
| |
| Chen Yuping,Zhong Liangwei.Three-dimensional Numerical Simulation of Influence of Diffuser Cone Angle on Vortex Tube Performance[J].Agricultural Equipment & Vehicle Engineering,2021(1). |
| |
| Authors: | Chen Yuping Zhong Liangwei |
| |
| Institution: | (School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China) |
| |
| Abstract: | In order to study the influence of the cone angle of the cold end diffuser on the performance of the vortex tube,and further optimize the structure parameters of the vortex tube,a three-dimensional model is established based on SolidWorks,and the standard k-εturbulence model is used to simulate the gas flow field in the vortex tube by using the software Fluent.The pressure,velocity and temperature nephogram of the cold end tube at the cone angle of 5°,10°,15°and 20°are obtained.When the cone angle is greater than 15°,the separation effect starts to decrease.The cold end outlet temperature increases with the increase of cone angle,and the cone angle of vortex tube should not exceed 15°. |
| |
| Keywords: | vortex tube cone angle numerical simulation separation efficiency |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
