| 带锯制材长、短工艺技术经济指标的分析比较 |
| |
| 引用本文： | 郑雅各.带锯制材长、短工艺技术经济指标的分析比较[J].木材工业,1990(4). |
| |
| 作者姓名： | 郑雅各 |
| |
| 作者单位： | 南京林业大学 |
| |
| 摘 要： | 本文是对国内制材厂(车间)带锯制材长、短工艺的分析比较,可供新建或改建制材工艺设计作参考。从实践和理论分析都证明短工艺流水线中工艺和运输设备互不干扰,各锯机负荷均衡,流程短,工人数少,充分发挥了跑车大带锯的优越性,提高了主要技术经济指标。
|
| 关 键 词： | 工艺流程 定位基准 出材率 合格率 劳动生产率 |
Analysis and comparison of technical and economical indexes for long and short process of handsaw milling |
| |
| Zheng Yage.Analysis and comparison of technical and economical indexes for long and short process of handsaw milling[J].China Wood Industry,1990(4). |
| |
| Authors: | Zheng Yage |
| |
| Institution: | Nanjing Forestry University |
| |
| Abstract: | This paper presents an analysis and comparison between long and short process of bandsaw milling in sawmills, which may provide a reference for designing new sawmills and modifying old onesThrough practice and theoretic analysis, the short process is prefered for its advantages, such as, the saw milling and convey equipment do not interfere with each other, the load on each saw is uniform, neither many workers nor large place is required, the headrig with carriage can reach high efficiency, the main technical and economic indexes are better than those of the long process. |
| |
| Keywords: | Technological process Positioning datum Lumber recovery Qualification rate productivity |
| 本文献已被 CNKI 等数据库收录！ |
|
