Release of aloe vera from electrospun aloe vera-PVA nanofibrous pad |
| |
| Authors: | Fatemeh Rafieian Isfahani Hossein Tavanai Mohammad Morshed |
| |
| Institution: | 1.Department of Textile Engineering, Center of Excellence in Applied Nanotechnology, Research Institute for Nanotechnology and Advanced Materials,Isfahan University of Technology,Isfahan,Iran |
| |
| Abstract: | The electrospinnability of aloe vera gel and the release mechanism as well as the kinetic of its release from poly vinyl alcohol (PVA) nanofibrous matrix is reported. Addition of PVA by an amount of only 1 % (w/w) to aloe vera solution made its electrospinning possible leading, to the fabrication of aloe vera nanofiber (99 %) with an average diameter of around 80 nm. Electrospinning of aloe vera-PVA solutions (25-75, 50-50, 75-25) led to the fabrication of nanofibers with average diameter of around 55, 105 and 110 nm, respectively. FTIR analysis showed no reaction between aloe vera and PVA. X-ray diffraction patterns showed no considerable effect from aloe vera on the amorphous structure of PVA. The release mechanism of aloe vera from PVA matrix in phosphate buffer solution was of Ficki type and the kinetic of the release followed Higuchi model. Aloe vera or aloe vera-PVA electrospun nanofibers may be used as an aloe vera release system in wound care. In a phosphate buffer solution, at least 60 percent of aloe vera is released in the first hour and about 90 % of aloe vera is released in 2-4 hours depending on the diameter of the nanofibers. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
