首页 | 本学科首页   官方微博 | 高级检索  
     检索      

梯形渠道圆柱形量水槽水力特性数值模拟
引用本文:吉庆丰,袁晓渊,葛蕴,庞圣.梯形渠道圆柱形量水槽水力特性数值模拟[J].灌溉排水学报,2012(2):59-61.
作者姓名:吉庆丰  袁晓渊  葛蕴  庞圣
作者单位:扬州大学水利科学与工程学院
摘    要:采用RNGk-ε紊流模型及VOF方法处理自由水面,数值模拟了梯形渠道圆柱形量水槽三维水流运动。通过对多个流量情况的计算,获得了驻点水深、水面位置、三维水流流态等圆柱形量水槽水力特性。数值模拟的自由水面位置、三维水流流态与试验结果基本一致,驻点水深的计算值与实测值的最大相对误差为4.11%,最小相对误差为0.53%。研究表明,采用的数值模拟方法,能够有效地模拟圆柱形量水槽水力特性,模拟精度能够达到量水设备要求的精度。

关 键 词:RNGk-ε紊流模型  VOF方法  圆柱形量水槽  水力特性

Numerical Simulation Research on Hydraulic Characteristics of Cylinder Measuring Flume in Trapezoidal Channel
JI Qing-feng,YUAN Xiao-yuan,GE Yun,PANG Sheng.Numerical Simulation Research on Hydraulic Characteristics of Cylinder Measuring Flume in Trapezoidal Channel[J].Journal of Irrigation and Drainage,2012(2):59-61.
Authors:JI Qing-feng  YUAN Xiao-yuan  GE Yun  PANG Sheng
Institution:(College of Hydraulic Science & Engineering,Yangzhou University,Yangzhou 225009,China)
Abstract:The hydraulic characteristics of cylinder measuring flume in trapezoidal channel are simulated by RNG k-ε turbulence model,with VOF method tracking the free surface.The rule of stagnation point water depth,water surface and velocity distribution is obtained.The results of numerical simulation coincide well with experiment data.Stagnation point water depth maximum relative error is 4.11%,minimum relative error is 0.53%.The research showed that,numerical simulation is an available method,and its calculation precision can satisfy the demand of discharge measuring equipment.
Keywords:RNG k-ε turbulence model  VOF method  cylinder measuring flume  hydraulic characteristics
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号