| 异步电动机调速系统自适应辨识的CMAC-ADRC算法 |
| |
| 引用本文： | 李 慧,刘星桥,李 景.异步电动机调速系统自适应辨识的CMAC-ADRC算法[J].农业机械学报,2015,46(3):358-365. |
| |
| 作者姓名： | 李 慧 刘星桥 李 景 |
| |
| 作者单位： | 江苏大学;淮阴工学院,江苏大学;机械工业设施农业测控技术与装备重点实验室,淮阴工学院 |
| |
| 基金项目： | 国家自然科学基金资助项目(60874014、51273154)、江苏高校优势学科建设工程资助项目（PAPD，NO.6-2011）、江苏省2013年度普通高校研究生科研创新计划资助项目(CXLX13_669)、江苏省科技支撑计划资助项目(BE2013402)和淮安市农业科技指导性项目(HANZ2014007) |
| |
| 摘 要： | 针对异步电动机调速系统快速响应时启动超调量大的问题,提出了一种基于自适应参数辨识的小脑模型神经网络复合自抗扰控制(CMAC-ADRC)的控制算法。将CMAC与ADRC各自的优点相结合,利用CMAC神经网络实现前馈控制,通过在线学习来抑制系统的超调量,增强系统的鲁棒性能,提高系统的快速性能,利用ADRC技术实现反馈控制,进一步增强系统的抗干扰能力。利用参考模型自适应参数辨识技术对转动惯量进行辨识,优化自抗扰补偿系数。以变频器结合异步电动机为控制对象,进行仿真,基于自适应参数辨识的CMAC-ADRC控制算法的干扰响应幅度是一阶优化自抗扰控制下干扰响应幅度的44.57%,是小脑模型神经网络复合比例-微分(CMACPD)控制下干扰响应幅度的17.69%,干扰恢复时间是一阶优化自抗扰控制下干扰恢复时间的50%,是CMAC-PD控制下恢复时间的60%。搭建MCU-CPLD-DSP控制平台进行了实验,基于自适应参数辨识的CMAC-ADRC控制算法的超调量是一阶优化自抗扰控制的45.49%,上升时间是一阶优化自抗扰控制的53.33%,干扰响应幅度是一阶优化自抗扰控制干扰响应幅度的71%,干扰恢复时间是一阶优化自抗扰控制干扰恢复时间的76.47%。
|
| 关 键 词： | 异步电动机 小脑模型神经网络 自抗扰控制 前馈控制 自适应辨识 |
| 收稿时间： | 2014/12/16 0:00:00 |
CMAC-ADRC Algorithm Based on Adaptive Parameter Identification for Asynchronous Motor Speed Control System |
| |
| Li Hui,Liu Xingqiao and Li Jing.CMAC-ADRC Algorithm Based on Adaptive Parameter Identification for Asynchronous Motor Speed Control System[J].Transactions of the Chinese Society of Agricultural Machinery,2015,46(3):358-365. |
| |
| Authors: | Li Hui Liu Xingqiao and Li Jing |
| |
| Institution: | Jiangsu University;Huaiyin Institute of Technology,Jiangsu University;Key Laboratory of Machinery Industry Agriculture Measure and Control Technology and Equipment and Huaiyin Institute of Technology |
| |
| Abstract: | According to the problem of asynchronous motor speed control system, this paper proposes a cerebellar model aritculation controller coupled with active disturbance rejection controller (CMAC-ADRC) control algorithms based on adaptive parameter identification. The respective advantages of CMAC and ADRC were combined. And CMAC neural network was used for feedforward control. Its online learning was applied which suppressed overshoot system, enhanced the robustness and dynamic performance of the system. ADRC was used for feedback control which further enhanced the anti jamming capability. The inertia was identified by using model reference adaptive parameter identification technique and ADRC compensation factors were optimized. Taking converter and asynchronous motor as control objects, the simulation was carried out. The simulation results showed that the response amplitude caused by disturbance of control system using CMAC-ADRC based on adaptive identification was 44.57% of the one using first-order optimization ADRC, and 17.69% of the one using CMAC-PD. Meanwhile, the recovery time of disturbance was 50% of the one using first-order optimization ADRC, and 60% of the one using CMAC-PD. Some experiments were finished on the experiment platform based on MCU-CPLD-DSP. The experiment result showed that with CMAC-ADRC, the overshoot, rising time, response amplitude caused by disturbance, and recovery time of disturbance were 45.49%, 53.33%, 71% and 76.47% of the one using first-order optimization ADRC, respectively. |
| |
| Keywords: | Asynchronous motor CMAC network Active disturbance rejection control Feedforward control Adaptive identification |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
|
