| 新型圆锯片的研究 |
| |
| 引用本文： | 洪德纯,刘君良,李传信.新型圆锯片的研究[J].吉林林学院学报,1992(2). |
| |
| 作者姓名： | 洪德纯 刘君良 李传信 |
| |
| 作者单位： | 吉林林学院木加系，吉林林学院木加系，吉林林学院木加系 |
| |
| 摘 要： | 为了提高薄圆锯片的工作稳定性,减小锯路宽度,提高出材率,取消铅片的适张度作业,节省修锯工时;降低锯切的工作噪声,改善工作卫生条件,将普通平圆铸片制成辐条式结构,其安装夹盘内表面制成径向滑槽式。用此新型圆锯片纵向锯切板、方材表明,锯路宽度平均降低1.9mm,材面质量和精度符合国家标准要求;不需要处理锯片的适张度;工作噪声平均降低9.1dB(A)。
|
| 关 键 词： | 圆锯片 锯路宽度 辐条 出材率 噪声 |
Study on a New Circular Sawalade |
| |
| Authors: | Hong Dechun Liu Juiliang Li Chuanxin |
| |
| Institution: | Hong Dechun;Liu Juiliang;Li Chuanxin |
| |
| Abstract: | A plane circular sawblade was made into the follo- wing structure:the sliding channels in diameter direction were grooved on the collar,and spokes were made on the sawblade in order to improve the working stability of the thin sawblade,red- euc kerf width,increase the rate of timber utilization,lessen noise to improve the condition of labour hygeine,and reduce repair- ing hours.The test in ripsawing lumber with the sawblade indica- ted that kerf width is decreased by 1.9mm,the average noise is also decreased by 9.1dB(A)and both surface quality and(saw-ing) precision are increased. |
| |
| Keywords: | Circular Sawblade Kerf width Lumber Recovery Noise |
| 本文献已被 CNKI 等数据库收录！ |
|
