首页 | 本学科首页   官方微博 | 高级检索  
     检索      

泵站进水流道模型水力损失的测试
引用本文:陆林广,祝婕,冷豫,吴开平.泵站进水流道模型水力损失的测试[J].排灌机械,2005,23(4):14-17.
作者姓名:陆林广  祝婕  冷豫  吴开平
作者单位:扬州大学水利科学与工程学院,江苏,扬州,225009
摘    要:根据低扬程水泵装置的研究方法可以多样化的观念,提出了将泵站进水流道模型从水泵装置模型中分离出来单独进行水力损失测试的新方法.介绍了该新方法所采用的测试装置、试验准则、水力损失计算方法及误差分析等有关问题.与传统测试方法相比,新方法具有费用少、周期短、测试准确等特点.采用新方法对2组不同几何形状的肘形进水流道模型进行了水力损失测试及比较,试验结果表明:肘形进水流道的水力损失与其几何形状有密切的关系。

关 键 词:泵站  进水流道  模型  水力损失  测试
文章编号:1005-6254(2005)04-0014-04

Measurement for Hydraulic Loss of Inlet Conduit of Pumping Station
LU Lin-guang,ZHU Jie,LENG Yu,WU Kai-ping.Measurement for Hydraulic Loss of Inlet Conduit of Pumping Station[J].Drainage and Irrigation Machinery,2005,23(4):14-17.
Authors:LU Lin-guang  ZHU Jie  LENG Yu  WU Kai-ping
Abstract:Based on the theory of variety for researching a low head pump system, a new method to separate inlet conduit from pump system was put forward for measuring its hydraulic loss. Problems relative to the test device, test rule, losses calculation method and error analysis, etc. were illustrated in this paper. Compared with the traditional method, the new method has advantages of reducing expenses, shortening period and being more accurate. The new method was applied to measure the hydraulic losses of two groups of elbow inlet conduits, the geometry shape of which are different. The test results signify that the hydraulic losses of elbow conduit are relative closely to their geometry shapes.
Keywords:Pumping station  Inlet conduit  Hydraulic loss  Measurement
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号