首页 | 本学科首页   官方微博 | 高级检索  
     检索      

皖北杨树二元立木材积表的编制
引用本文:章裕超,杜传奇,黄庆丰,桑和会,杨道武.皖北杨树二元立木材积表的编制[J].林业科技开发,2007,21(2):32-34.
作者姓名:章裕超  杜传奇  黄庆丰  桑和会  杨道武
作者单位:1. 安徽农业大学林学与园林学院
2. 安徽省林业厅
摘    要:以安徽省杨树人工林为研究对象,按照立木材积表编制要求,随机抽取329棵杨树伐倒木材积资料.以300棵样木资料为编表样本,选用3种数学模型为二元材积的候选模型,利用非线性麦夸特迭代求解法确定各模型参数、剩余标准差、相关指数.根据相关指数和剩余标准差,确定最优二元材积模型为:V=0.000 096 93d2.0123h0.6147".以29棵样木资料为验表样本,分别计算二元材积模型理论材积与实际材积的平均相对误差、平均绝对相对误差和系统误差,计算结果为:二元材积表分别是2.7%、8.6%、0.1%.各种材积误差均满足林业生产材积估算误差要求.

关 键 词:杨树  二元材积表  编制
收稿时间:2006-11-20
修稿时间:2007-01-05

Study On Establishment of the Volume Table of Standing Timber of Poplar Tree in North of Anhui Province
ZHANG Yu-chao,DU Chuan-qi,HUANG Qing-feng,SANG He-hui,YANG Dao-wu.Study On Establishment of the Volume Table of Standing Timber of Poplar Tree in North of Anhui Province[J].China Forestry Science and Technology,2007,21(2):32-34.
Authors:ZHANG Yu-chao  DU Chuan-qi  HUANG Qing-feng  SANG He-hui  YANG Dao-wu
Institution:Faculty of Forest and Landscape, Anhui Agriculture University ,230036 ,Hefei ,China
Abstract:The data for establishing stem volume table of poplar tree were collected from 329 wood samples of the poplar trees in Anhui province.Based on the parameters and the remaining standard deviations of 300 samples from total samples,relevant index of the binary volume model were calculated by nonlinear equations Mai Kuate computation.According to the relevant index and the reside standard deviations,the binary volume model of the Poplar tree was fitted.The best binary volume model is V=0.000 096 93d2.012 3h0.614 7.Based on the 29 wood samples,the average relative error,the average absolutely error,and systematic error of the binary volume table were calculated as 2.7%,8.6%,0.1% respectively.Each error of the volume table met the need of forestry production.
Keywords:Poplar tree  Volume table  Establishment
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号