Model experimental study on the migration behavior of heavy metals in electrokinetic remediation process for contaminated soil |
| |
| Authors: | Takeshi Kawachi Hiroshi Kubo |
| |
| Institution: | Obayashi Corporation Technical Research Institute , Kiyose , 204-0011 , Japan |
| |
| Abstract: | Recently in Japan, like in other industrialized countries, treatment of contaminated soil or ground has become an important issue in redeveloping such areas as old factories, mining sites, and other polluted sites. In these cases, measures such as a construction of cut-off walls and disposal to controlled waste disposal sites have been so far taken. But, the treatment of contaminated soils has become more difficult nowadays. Therefore, remediation of contaminated soil by removal or extraction of contaminants is necessary and various methods have been developed and applied in many countries. Authors have tried to develop an electrokinetic remediation method for soil contaminated with heavy metals and some basic and pilot scale experiments have been carried out. In this paper, the results of a model experiment using an artificial soil contaminated with Cu or Ph or Cr are presented as follows. i) In the electrokinetic process, migration of water to the cathode by electroosmosis, migration of ions to the cathode or anode by electrophoresis and electrolysis of water occur spontaneously. ii) Upon DC loading, Cu and Pb migrate to the cathode and accumulate as oxides or hydroxides near the cathode but are not removed from contaminated soil. However, in the case of Cr contaminated soil, Cr in the form of Cr(VI) migrates to the anode and is removed from soil through the drainage water. iii) After DC loading for 2 weeks, the concentration of exchangeable cations and composition of soil changed drastically while the CEC and clay mineralogy did not change appreciably. |
| |
| Keywords: | contaminated soil electrokinetic remediation electrolysis electrophoresis heavy metal |
|
|
