| 基于Ansys的发动机离合装置动力输出轴仿真研究 |
| |
| 引用本文： | 姜贵川,赫志飞,华荣江,吴鸣远,王尚君,滕绍民,杨泽宇.基于Ansys的发动机离合装置动力输出轴仿真研究[J].农业工程,2022,12(10):97-100. |
| |
| 作者姓名： | 姜贵川 赫志飞 华荣江 吴鸣远 王尚君 滕绍民 杨泽宇 |
| |
| 作者单位： | 1.中国农业机械化科学研究院集团有限公司，北京 100083 |
| |
| 基金项目： | 国有资本金项目“智能农机装备关键技术升级与攻关项目”（0301012022019） |
| |
| 摘 要： | 针对传统离合装置结构不适用于大功率收获机工作的问题，设计了一种可实现发动机对工作部件分步驱动的离合装置，利用有限元仿真分析方法对离合装置进行了研究。结果表明，在接合过程中，输出轴与行走驱动胶带轮结合处一侧的应力较为集中，存在发生形变的可能，动力输出轴在0.48 s完成对负载扭矩的传递，实现稳定的扭矩输出，该装置可以有效保护发动机及工作部件。
|
| 关 键 词： | 发动机 离合装置 输出轴 仿真 |
| 收稿时间： | 2022-07-08 |
| 修稿时间： | 2022-10-16 |
Ansys-based Simulation Study of Power Output Shaft of Engine Clutch Unit |
| |
| Institution: | 1.Chinese Academy of Agricultural Mechanization Sciences Group Co.，Ltd.，Beijing 100083，China2.Agricultural and Animal Husbandry Technology Extension Center of Inner Mongolia Autonomous Region，Hohhot Inner Mongolia 010000，China3.Changping Agricultural Mechanization Technology Extension Station，Beijing 102200，China |
| |
| Abstract: | In view of problem that traditional clutch device structure is not suitable for work of high-power harvesters, a clutch device that could realize step-by-step drive of engine to working parts was designed, and finite element simulation analysis method was used to study clutch device．Results showed that, during joining process, stress on side where output shaft was combined with driving pulley was more concentrated and there was a possibility of deformation, power output shaft could complete transmission of load torque in 0.48 s and realize stable torque output, and device could effectively protect service life of engine and working parts． |
| |
| Keywords: | |
|
| 点击此处可从《农业工程》浏览原始摘要信息 |
| 点击此处可从《农业工程》下载免费的PDF全文 |
