| 齿带式残膜回收机脱膜装置的设计与试验 |
| |
| 引用本文： | 康晓悦,陈学庚,赵岩,王东伟,何晓宁,缑海啸,周敦兴.齿带式残膜回收机脱膜装置的设计与试验[J].农机化研究,2021(4):161-166,173. |
| |
| 作者姓名： | 康晓悦 陈学庚 赵岩 王东伟 何晓宁 缑海啸 周敦兴 |
| |
| 作者单位： | 青岛农业大学机电工程学院;石河子大学机械电气工程学院;农业农村部西北农业装备重点实验室 |
| |
| 基金项目： | 农业农村部残膜污染防控重点实验室开放基金项目(Klpcpaf2018);新疆生产建设兵团重大科技项目(2018AA001);兵团应用基础研究项目(2016AG023)。 |
| |
| 摘 要： | 针对现有残膜回收机脱膜不干净的问题,研制了一种脱膜装置,主要包含中心辊、带轮和脱膜圆盘。介绍了装置的工作原理,通过理论分析并结合计算确定了脱膜圆盘的主要结构参数。为检验该装置的工作效果,于2019年3月在新疆第一师六团进行田间试验,试验面积累计10.5hm^2,采用三因素三水平试验,用Design-expert软件中Box-behnken模块分析试验结果,优化得出最优组合。结果表明:当机具前进速度为6km/h、脱膜辊转速为120r/min、卸膜辊转速为180r/min时,脱膜率最高为96%,达到了使用要求。
|
| 关 键 词： | 残膜回收机 脱膜装置 齿带式 |
Design and Experiment on Removing Residual Film Device for Nail-Teeth Belt Residual Film Collector |
| |
| Kang Xiaoyue,Chen Xuegeng,Zhao Yan,Wang Dongwei,He Xiaoning,Gou Haixiao,Zhou Dunxing.Design and Experiment on Removing Residual Film Device for Nail-Teeth Belt Residual Film Collector[J].Journal of Agricultural Mechanization Research,2021(4):161-166,173. |
| |
| Authors: | Kang Xiaoyue Chen Xuegeng Zhao Yan Wang Dongwei He Xiaoning Gou Haixiao Zhou Dunxing |
| |
| Institution: | (College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China;College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000,China;Key Laboratory of Northwest Agricultural Equipment,Ministry of Agriculture,Shihezi 832000,China) |
| |
| Abstract: | Aiming at the problem that removing residual film not clear in the existing residual film collector.A device of film-removing roller has been designed.It is mainly composed of center roller,pulley and disk for separating film from nail teeth.The working principle of the device is introduced.The main structural parameters of the disk were determined by theoretical analysis and calculation.To test the working effect of the device.Field experiment was conducted in February 2019 in the Sixth Regiment of the First Division of Xinjiang,The total test area is 10.5 hectares.Three-factor and three-level test has adopted,and use Design-expert to analyse the test results,and optimize the experiment to get the best combination.The experimental results show that the removing rate can reach 96%when the speed of advance is 6km/h,revolving speed of the roller separating the film from the nail teeth the revoloving speed of the striping roller.The device for removing residual film can meet the use requirements. |
| |
| Keywords: | residual film collector removing residual film device nail-teeth belt |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
