| 电场处理改善玉米醇溶蛋白膜理化性质 |
| |
| 引用本文： | 徐慧,陈野.电场处理改善玉米醇溶蛋白膜理化性质[J].农业工程学报,2015,31(8):272-276. |
| |
| 作者姓名： | 徐慧 陈野 |
| |
| 作者单位： | 天津科技大学食品工程与生物技术学院，教育部食品营养与安全重点实验室，天津 300457,天津科技大学食品工程与生物技术学院，教育部食品营养与安全重点实验室，天津 300457 |
| |
| 基金项目： | 国家自然科学基金面上项目(31271974) |
| |
| 摘 要： | 传统浇铸法制备的玉米醇溶蛋白薄膜表面粗糙,机械性质及耐水性较差。为了改善玉米醇溶蛋白理化性质,在传统浇铸法膜制备过程中引入平行匀强电场(1~5 A/m2)处理蛋白成膜液。经过电场处理后,玉米醇溶蛋白表面光滑、形状完整。试验结果表明:电场处理可改善薄膜力学性质、表面疏水性、水蒸气透过率等性质;随着电流密度的增大,薄膜拉伸强度、断裂伸长率、水蒸气透过率、吸水率以及表面接触角呈现规律性增加或者减小;电场处理下薄膜热特性改变,与未处理组相比变性温度略有提高,最大增幅为19.5℃。当电流密度为4 A/m2时,薄膜理化性质较佳:拉伸强度、断裂伸长率分别为73.09 MPa和9.68%,吸水率降低至14.87%,水蒸气透过率为2.55×10-8 g·m/(m2·h·Pa),静态接触角为62.18°,变性温度提高到118.39℃,热稳定性提高,薄膜表面光滑。电场可诱导成膜液中分子有序性排列,提高薄膜均一性;通过调节电流密度可得到具有一定力学强度和亲/疏水性的薄膜。试验结果为制备具有特定功能性的纯玉米醇溶蛋白薄膜材料提供了理论依据。
|
| 关 键 词： | 膜 电场 机械性能 浇铸成型 玉米醇溶蛋白 |
| 收稿时间： | 2015/1/13 0:00:00 |
| 修稿时间： | 2015/3/20 0:00:00 |
Electric field treatment improving physicochemical properties of zein film produced by casting |
| |
| Xu Hui and Chen Ye.Electric field treatment improving physicochemical properties of zein film produced by casting[J].Transactions of the Chinese Society of Agricultural Engineering,2015,31(8):272-276. |
| |
| Authors: | Xu Hui and Chen Ye |
| |
| Institution: | College of Food Engineering and Biotechnology, Tianjin University of Science and Technology, Key Laboratory of Food Nutrition and Safety, Ministry of Education of China, Tianjin 300457, China and College of Food Engineering and Biotechnology, Tianjin University of Science and Technology, Key Laboratory of Food Nutrition and Safety, Ministry of Education of China, Tianjin 300457, China |
| |
| Abstract: | Abstract: Zein is the major storage protein of corn and comprises 45%-50% of total protein in corn, and possesses good property of forming film in virtue of abundant sulphur amino acids. High content of hydrophobic amino acid grants hydrophobicity to zein film, but film made of natural casting retains its crispness. In order to improve the flexibility of zein film, plasticizers are added into the film solution. Though plasticizers can significantly enhance mechanical properties of zein film, they affect their security and edibility. Equipments such as pulsed electric field used in processing of casting can improve the properties of zein film by taking appropriate measures, without affecting the security and edibility of zein film. But the popularization of these equipments is hindered for their high price. In this paper, the combination of DC power (DYY-8C, Beijing) and conducting glass coated with indium tin oxide was used to set up paralleled uniform electric field, and then the electric field was introduced into the processing of zein film. This method was of simple equipment, easy operation and good selectivity. Coupled with the paralleled uniform electric field (1-5 A/m2), the soft zein films with complete shape were obtained by casting. The properties of zein film such as tensile strength, elongation at break, water vapor permeability and water absorption were measured and analyzed to evaluate the influence of the paralleled uniform electric field on zein film. Meanwhile, thermostability difference between films before and after treatment was studied by differential scanning calorimetry. By analyzing the data, tensile strength and elongation at break increased with the increase of electric current density while water vapor permeability and water absorption decreased. When electric current density was at 4 A/m2, properties of zein film were optimal. Tensile strength and elongation at break reached the maximum value (73.09 MPa and 9.68%, respectively); water absorption and water vapor permeability reached the minimum value (14.87% and 2.54×10-8 g·m/(m2·h·Pa), respectively). Contact angle declined slightly (within 5°), and tended towards stability when electric current density was above 2 A/m2. Experiments indicated that the presence of electric field force facilitated interaction between zein molecules, and these molecules were organized in a network pattern contributing to the improvement of mechanical properties. Meanwhile, polar amino acid residues tended to move forward to the topside of the network, resulting in the slight decline of contact angle. There existed significant difference among the data obtained from the experiments by Duncan analysis (P<0.01). During the processing of zein film, no hazardous substance was added into the film solution. By adjusting the electric current density, film or edible packing material with flexibility, fixed shape, mechanical strength, certain mechanical properties or contact angle can be obtained, which are biodegradable, edible and non-toxic toward humans and environment. |
| |
| Keywords: | films electric fields mechanical properties casting zein |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业工程学报》浏览原始摘要信息 |
| 点击此处可从《农业工程学报》下载免费的PDF全文 |
|
