Abstract: | Abstract During drying, timber changes its shape, mainly as a result of specific properties such as shrinkage anisotropy, radial differences in longitudinal shrinkage and spiral grain. The distortion, causing severe downgrading, can be reduced by restraining the timber and by using special drying schemes. The research described here is related to a project on the improvement of shape stability of Norway spruce. In the present part, different larch species from three stands were dried at high temperatures (80, 120 and 170°C). The effects of restraint during presteaming, drying and steaming on short-term twist reduction were investigated. The permanency of drying distortions was investigated in subsequent moisture cycling. Results showed a clear dependency of twist on the distance to pith. Restrained specimens sawn close to pith experienced reduced twist. This twist reduction was permanent during subsequent moisture variations. Drying temperature did not significantly influence twist and twist amplitude in moisture cycling. |