| 基于虚拟样机技术的随机路面输入平顺性仿真分析 |
| |
| 引用本文： | 陈黎卿,郑泉,王启瑞.基于虚拟样机技术的随机路面输入平顺性仿真分析[J].拖拉机与农用运输车,2006,33(1):31-33. |
| |
| 作者姓名： | 陈黎卿 郑泉 王启瑞 |
| |
| 作者单位： | 1. 安徽农业大学,工学院,合肥,230061
2. 合肥工业大学,机械与汽车工程学院,合肥,230009 |
| |
| 摘 要： | 以某皮卡车为研究对象,利用ADAMS/VIEW软件建立了车辆多刚体动力学模型,并进行了随机路面下的仿真。将仿真所得结果与试验所得结果进行了对比,结果表明数据吻合较好,整车模型建立准确,为进一步对车辆做设计分析打下了良好的基础。
|
| 关 键 词： | 虚拟样机技术 随机路面 平顺性 |
| 文章编号： | 1006-0006(2006)01-0031-03 |
| 收稿时间： | 2005-05-05 |
| 修稿时间： | 2005年5月5日 |
Simulation and Analysis of Ride Comfort under Random Road Based on Virtual Prototype |
| |
| CHEN Li-qing,ZHENG Quan,WANG Qi-ri.Simulation and Analysis of Ride Comfort under Random Road Based on Virtual Prototype[J].Tractor & Farm Transporter,2006,33(1):31-33. |
| |
| Authors: | CHEN Li-qing ZHENG Quan WANG Qi-ri |
| |
| Institution: | 1. College of Engineering, Anhui Agricultural University, Hefei 230061, China; 2. School of Mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | The paper established a detailed muti-body dynamic model of a pickup vehicle based on ADAMS/VIEW software package,and the simulation of the ride comfort under random road was performed.Comparing with test data,the (simulation) results agreed well with the experiment results,and the model was set up accurately,so a good foundation has been laid for further analysis. |
| |
| Keywords: | Virtual prototype Random road Ride comfort |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
