| 容器成型过程对育苗基质物理性质的影响 |
| |
| 引用本文： | 孙延稳,陈尔学,张晓文,刘幸红,高嘉,马海林,刘方春,修梅艳.容器成型过程对育苗基质物理性质的影响[J].山东林业科技,2019(1):45-48. |
| |
| 作者姓名： | 孙延稳 陈尔学 张晓文 刘幸红 高嘉 马海林 刘方春 修梅艳 |
| |
| 作者单位： | 菏泽市定陶区人社局;定陶区林业局;聊城市田庄苗圃;山东省林业科学研究院;青岛新都市设计集团有限公司 |
| |
| 基金项目： | 山东省林业科技创新项目"林地土壤水肥增容抗旱促生关键技术研究"(LYCX08-2018-41) |
| |
| 摘 要： | 选用泥炭(PE)和菇渣(MR)作为主要基质材料,配以珍珠岩和蛭石制成育苗基质,研究了无纺布容器育苗成型机的成型过程对基质物理性质的影响。结果表明:育苗成型机的成型过程显著增加了育苗基质的容重,但其对PE育苗基质容重的影响显著大于MR;且基质中珍珠岩的含量越高,成型过程对容重的影响越大。同PE相比,成型过程对MR基质总孔隙的影响相对较小。育苗基质中蛭石的添加比例增加,经育苗成型机的成型过程后,育苗基质的通气孔隙降低幅度提高;而珍珠岩比例增加,基质的总孔隙度、通气孔隙和持水孔隙的降低幅度增加。不同组分的育苗基质经成型过程后,田间持水量显著降低,持水能力明显下降。
|
| 关 键 词： | 成型过程 育苗容器 基质 物理性质 |
Effect of Container Shaping Process on Nursery Substrate Physical Properties |
| |
| Institution: | (Human Resources and Social Security Bureau of Dingtao,Heze Shandong 274100;Dingtao Foresty Bureau,Heze Shangdong 274100;The nursery of liaocheng Tianzhuang,Liaocheng Shandong,252000;Shandong Academy of Forestry Sciences,Jinan Shandong 250014;The group limited of Qingdao new urban design,Shandong Qingdao 266073) |
| |
| Abstract: | Peat(PE)and mushroom residue(MR),selected to use as main nursery materials were applied with pearlite and vermiculite.Effect of sapling growing medium in cultivation shaping machine of non-woven fabrics on nursery substrate physical properties was studied.Results showed that container shaping process significantly increased the bulk density.However,a greater influence in PE was achieved than that in MR.Additionally,higher ratio of pearlite in nursery substrate,greater influence of shaping process on bulk density.Container shaping process had little effect on total porosity of PE than that of MR.Aeration porosity decreased due to container shaping process regardless of PE or MR.The decreased extent was increased along with the increased vermiculite ratio.The total porosity,aeration porosity,and water-holding porosity were increased along with the increased pearlite.Additionally,container shaping process significantly decreased the field capacity,indicative of the lowered water-holding capacity. |
| |
| Keywords: | shaping process nursery container substrate physical properties |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
