基于Pro/E和ANSYS的16V170柴油机有限元分析 |
| |
引用本文: | 黄以兵,邓德乐,刘永启,张震,和蒙蒙,李洪亮.基于Pro/E和ANSYS的16V170柴油机有限元分析[J].山东农机,2012(2):47-50. |
| |
作者姓名: | 黄以兵 邓德乐 刘永启 张震 和蒙蒙 李洪亮 |
| |
作者单位: | [1]山东理工大学交通与车辆工程学院,山东淄博255049 [2]淄博柴油机总公司,山东淄博255077 |
| |
摘 要: | 将有限元法应用到淄博柴油机总公司的16V170柴油机曲轴设计之中,利用ANSYS软件对整体曲轴进行了静强度和模态分析。采用参数化造型软件Pro/E对16V170柴油机曲轴进行三维实体造型,再将模型导入到ANSYS中进行有限元分析。分析表明曲轴满足设计要求,采用的方法以及得出的结论可为16V170柴油机曲轴的设计、改进以及优化提供技术和理论支持。
|
关 键 词: | 柴油机曲轴 有限元 静强度 模态分析 |
Finite Element Analysis of 16V170 Diesel Engine Crankshaft Based on Pro/E and ANSYS |
| |
Authors: | Huang Yibing Deng Dele Liu Yongqi Zhang Zhen He Mengmeng Li Hongliang |
| |
Institution: | 1.School of Traffic and Vehicle Engineering,Shandong University of Technology,Zibo 255049,China;2.Zibo Diesel Engine Parent Company,Zibo 255077,China) |
| |
Abstract: | Finite element analysis was used for 16V170 diesel engine crankshaft design in Zibo Diesel Engine Parent Company.Static strength and modal analysis of the whole crankshaft were studied with ANSYS.A 3-dimension model of the whole crankshaft was set up with Pro/E,and then it was transferred into ANSYS for analyzing.The results show that the crankshaft could meet the design requirements,the method and the conclusion in this paper could be used in the design,improving and optimizing of 16V170 diesel engine crankshaft. |
| |
Keywords: | diesel engine crankshaft finite element analysis static strength model analysis |
本文献已被 维普 等数据库收录! |
|