Design Characteristics of Spiral Aerator |
| |
| Authors: | Subha M Roy Sanjib Moulick Bimal C Mal |
| |
| Institution: | 1. Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, India;2. School of Civil Engineering, Kalinga Institute of Industrial Technology, Bhubaneswar, Odisha, India;3. JIS University, Agarpara, Kolkata, West Bengal, India |
| |
| Abstract: | In this study, the performance of a spiral aerator, a modified design of the paddlewheel aerator, was evaluated to determine its applicability in aquaculture ponds. The aeration characteristics of the spiral aerator were determined by conducting aeration experiments in a cement concrete tank of dimension 5 × 5 × 1.5 m. Nondimensional numbers related to oxygen transfer (E) and power consumption (Ne) were proposed and expressed as functions of geometric (number of handles per shaft, n) and dynamic (Froude and Reynolds number) parameters. Simulation equations for oxygen transfer and power consumption based on the Froude criterion were developed. The maximum brake power standard aeration efficiency was achieved at n = 13. Finally, an economic analysis was performed assuming a typical Indian major carp culture pond to determine the optimum rotational speed of the aerator at different pond volumes and dissolved oxygen concentration present in the pond at which the aeration cost is minimized. The results showed that the least aeration cost is achievable when rotational speed of the spiral aerator is only 70 rpm for pond volumes up to 700 m3 and from 120 to 220 rpm for pond volumes exceeding 700 m3. |
| |
| Keywords: | aeration aeration cost spiral aerator |
|
|
