| 棒杆式红枣采摘机的设计与计算 |
| |
| 引用本文： | 范修文,张宏,马少辉,李传峰,张洪洲,孟炜.棒杆式红枣采摘机的设计与计算[J].塔里木农垦大学学报,2013(3):34-38. |
| |
| 作者姓名： | 范修文 张宏 马少辉 李传峰 张洪洲 孟炜 |
| |
| 作者单位： | [1]塔里木大学机械电气化工程学院,新疆阿拉尔843300 [2]塔里木大学现代农业工程重点实验室,新疆阿拉尔843300 |
| |
| 基金项目： | 塔里木大学校长基金项目（TDZKSSZD201205）;塔里木大学校长基金项目（TDZKSSZD201303）. |
| |
| 摘 要： | 南疆地区的红枣种植已经规模化、产业化，依靠人工采收已不能满足实际生产的需要，本文设计了一种新型的模拟人工敲打的棒杆式红枣采摘机。该机主要有机架、传动装置、工作轴、聚氨酯弹性棒杆等部分组成。通过调节装置可以实现采摘高度的调整，调整幅度为0—500mm，调整工作杆的长度可实现对枣树树冠的仿形。根据田间试验和理论计算得到了棒杆式红枣采摘机工作杆的转速最小值为54r／min。
|
| 关 键 词： | 红枣 采摘机 设计 计算 |
Design and Calculation of Rod -typeRed Jujube Picking Machine |
| |
| Fan Xiuwen Zhang Hong Ma Shaohui Li Chuanfeng Zhang Hongzhou Meng Wei.Design and Calculation of Rod -typeRed Jujube Picking Machine[J].Journal of Tarim University of Agricultural Reclamation,2013(3):34-38. |
| |
| Authors: | Fan Xiuwen Zhang Hong Ma Shaohui Li Chuanfeng Zhang Hongzhou Meng Wei |
| |
| Institution: | Fan Xiuwen Zhang Hong Ma Shaohui Li Chuanfeng Zhang Hongzhou Meng Wei ( 1 College of Mechanic and Electrical Engineering, Tarim University, Alar, Xinjiang 843300;2 Key Laboratory of Mordem Agricultural Engineering, Tarim University, Alar, Xinjiang 843300) |
| |
| Abstract: | Because of the large - scale and industrialized development of jujube in Southern Xinjiang, manual picking cannot satisfy the need of the large - scale production. A new rod - type picking machine imitating manual working was designed in this paper. The picking machine is made up of rack, gearing and working device, etc. The picking height can be adjusted by the regulating device, with a range from Omm to 500mm. The profile modeling of the crown of jujube trees can be achieved by adjusting the length of the working beam. The minimum revolving speed of the working is 54 r/min, according to the field experiments and theoretical calculation. |
| |
| Keywords: | red jujube picking machine design calculation |
| 本文献已被 维普 等数据库收录！ |
