|
|||||
|
|
Within- and between-stand variation in selected properties of Sitka spruce sawn timber in the UK: implications for segregation and grade recovery |
|
| Authors: | John R Moore Andrew J Lyon Gregory J Searles Stefan A Lehneke Daniel J Ridley-Ellis |
| Institution: | 1. Forest Products Research Institute, Edinburgh Napier University, Edinburgh, EH10 5DT, UK 2. Scion, Private Bag 3020, Rotorua, 3046, New Zealand 3. Forest Products Commission, South Perth, WA, 6151, Australia |
| Abstract: | ContextInformation on wood properties variation is needed by forest growers and timber processors to best utilise the available forest resource and to guide future management.AimThis study aims to quantify the variation in selected properties of Sitka spruce (Picea sitchensis (Bong.) Carr.) structural timber.MethodsTwelve harvest-age stands were selected, ten trees per site were felled and processed into 301 logs. Dynamic modulus of elasticity (MOEdyn) was measured on each tree and log using portable acoustic instruments. Logs were processed into structural timber and its MOE and bending strength was determined.ResultsOverall, the timber satisfied the MOE, bending strength and density requirements for the C16 strength class. Approximately 25 % of the total variation in timber mechanical properties was attributed to between-stand differences, with the remaining 75 % attributed to within-stand differences. A series of equations were developed to predict site, tree and log-level variation in timber properties.ConclusionKnowledge of the site and stand factors that are associated with differences in timber properties can assist with segregation of the current resource. Portable acoustic tools can also be used to increase the stiffness of sawn timber by segregating out individual trees and logs that will yield low stiffness timber. |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ | |