| 变截面板簧轧机电液伺服系统性能分析 |
| |
| 引用本文： | 李素玲,刘军营.变截面板簧轧机电液伺服系统性能分析[J].农业机械学报,2007,38(9):171-174. |
| |
| 作者姓名： | 李素玲 刘军营 |
| |
| 作者单位： | 1. 山东理工大学电气与电子工程学院
2. 山东理工大学机械工程学院 |
| |
| 基金项目： | 山东理工大学校科研和教改项目 |
| |
| 摘 要： | 设计了变截面板簧轧机电液伺服系统,该系统采用了工控机和PLC组成的两级计算机控制方式。建立了由电液伺服阀、伺服液压缸和轧辊组成的伺服控制系统数学模型。在分析系统的稳态性能和动态性能基础上,采用PID校正方式,进一步增大了系统的剪切频率,缩短了调节时间,降低了稳态误差。结果表明轧机电液伺服系统的稳定性好、控制精度高,达到了设计目的。
|
| 关 键 词： | 变截面板簧 电液伺服 数学模型 控制性能 |
| 修稿时间： | 2006-04-18 |
Performance Analysis of Electro-hydraulics Servo System of Automobile Leaf Spring Rolling Mill |
| |
| Li Suling,Liu Junying.Performance Analysis of Electro-hydraulics Servo System of Automobile Leaf Spring Rolling Mill[J].Transactions of the Chinese Society of Agricultural Machinery,2007,38(9):171-174. |
| |
| Authors: | Li Suling Liu Junying |
| |
| Institution: | Shandong University of Technology |
| |
| Abstract: | Adopting two degree computers control system, the electro-hydraulics servo system of automobile leaf spring rolling mill was designed in the paper. The mathematical model of electro-hydraulics servo system, composed of the electro-hydraulics servo valve and servo cylinder and roller, was built up. On the basis of analysing the steady characteristic and dynamic characteristic of system, PID correction methods had been adopted to increase cut off frequency and decrease adjusting time and steady state error further. The result showed that electro-hydraulics servo system of rolling mill has good steady characteristic and high control precision, and it achieves the design purpose. |
| |
| Keywords: | Leaf spring Hydraulics servo Mathematical model Control quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
| 点击此处可从《农业机械学报》下载免费的PDF全文 |
