|
|||||
|
|
| 基于Pro/E的播种机零部件参数化造型 | |
| 引用本文： | 杨福增,傅向华,杨芳,薛惠岚,李新广,王鹏飞.基于Pro/E的播种机零部件参数化造型[J].农业机械学报,2002,33(4):66-68. |
| 作者姓名： | 杨福增 傅向华 杨芳 薛惠岚 李新广 王鹏飞 |
| 作者单位： | 1. 西北农林科技大学机电学院,陕西杨凌,712100 2. 河南许昌机电工程学校,许昌市,461000 3. 陕西延安农业机械研究所,延安市,716000 |
| 基金项目： | 西北农林科技大学青年科研基金资助项目 (项目编号 :5 Q10 818) |
| 摘 要： | 针对旱作节水播种机设计中存在的设计手段落后、设计效率低下等问题，应用基于特征的参数化造型软件Pro/E对旱作节水播种机的零部件进行参数化造型，在对该类播种机开沟器、排种器、地轮等零部件的造型设计中探讨了技术要点，提高了旱作节水播种机修改设计和系列化设计的效率。 |
| 关 键 词： | Pro／E 播种机 零部件 参数化造型 设计 |
| 修稿时间： | 2001年6月14日 |
Research on Parametric Modeling of Parts of Seeding Machine Based on Pro/E |
|
| Yang Fuzeng,Fu Xianghua,Yang Fang,Xue Huilan.Research on Parametric Modeling of Parts of Seeding Machine Based on Pro/E[J].Transactions of the Chinese Society of Agricultural Machinery,2002,33(4):66-68. | |
| Authors: | Yang Fuzeng Fu Xianghua Yang Fang Xue Huilan |
| Abstract: | Owing to the inefficient design of water saving seeding machine for dry farming, a feature based parametric modeling software Pro/E was used for the design of machine parts. It overcomes the disadvantages in the conventional design procedure, such as frequently modifying of the design, and improves the quality of design. Through modeling the seeding boots, the seedmeter and the wheel, some key techniques were discussed in the paper. A method for design of the parts was pointed out and it can be used in the correlation farming parts design. |
| Keywords: | Seeders Design Parametric modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |