| 不同生产工艺对天然橡胶臭氧老化性能与结构的影响 |
| |
| 引用本文： | 王兵兵,黄桂春,陈永平,黄向前,黄海清,陈琅,周娟,廖建和.不同生产工艺对天然橡胶臭氧老化性能与结构的影响[J].热带作物学报,2015,36(7):1342-1347. |
| |
| 作者姓名： | 王兵兵 黄桂春 陈永平 黄向前 黄海清 陈琅 周娟 廖建和 |
| |
| 作者单位： | 海南大学材料与化工学院;海南天然橡胶集团;海南大学应用科技学院;海南天然橡胶集团;海南天然橡胶集团;海南大学材料与化工学院;海南大学应用科技学院;海南大学应用科技学院 |
| |
| 摘 要： | 胶乳的凝固和干燥是天然生胶生产的重要环节。在不同凝固方式（酸凝固、微波凝固、自然凝固、微生物凝固）、不同干燥方式（自然风干、热风干燥）等不同工艺下研究了天然橡胶（NR）的理化性能及其臭氧老化前后物理机械性能，发现微生物凝固胶在相同臭氧老化条件下其拉伸强度最高，且变化率最低。采用臭氧老化研究的结果表明：微生物凝固胶（m-NR）硫化胶在静态拉伸状态下臭氧龟裂达到16 h。热重分析探讨了不同工艺NR硫化胶热老化过程，并采用衰减全反射傅立叶红外光谱（FTIR-ATR）技术初步探讨了臭氧对微生物凝固胶的老化作用。
|
| 关 键 词： | 不同工艺 臭氧老化 臭氧龟裂 热老化 |
Properties and Structure of Nature Rubber on Ozone Aging Under Different Production Processes |
| |
| WANG Bingbing,HUANG Guichun,CHEN Yongping,HUANG Xiangqian,HUANG Haiqing,CHEN Lang,ZHOU Juan and LIAO Jianhe.Properties and Structure of Nature Rubber on Ozone Aging Under Different Production Processes[J].Chinese Journal of Tropical Crops,2015,36(7):1342-1347. |
| |
| Authors: | WANG Bingbing HUANG Guichun CHEN Yongping HUANG Xiangqian HUANG Haiqing CHEN Lang ZHOU Juan and LIAO Jianhe |
| |
| Institution: | College of Materials and Chemical Engineering, Hainan University;Hainan Natural Rubber Group,;College of Science and Technology, Hainan University;Hainan Natural Rubber Group,;Hainan Natural Rubber Group,;College of Materials and Chemical Engineering, Hainan University;College of Science and Technology, Hainan University;College of Science and Technology, Hainan University |
| |
| Abstract: | Latex coagulation and drying are important parts of natural rubber production. This paper studied the physical and chemical properties of natural rubber, physical and mechanical properties before and after ozone aging under different solidification mode(acid coagulation, microwave coagulation, natural coagulation, microbiology coagulation)and different drying methods(drying, air drying). It was found that the tensile strength treated with microbes solidified gum was the highest and the change rate was the lowest at the same ozone aging conditions.The use of ozone aging instrument results showed that microbial solidified glue(m-NR)vulcanizated produced ozone cracking time in the static tensile state reached 16 h. Thermal gravimetric analysis explored the thermal aging process of different processes NR vulcanization, and the use of FTIR-ATR technique explored the aging effects of ozone on microbial solidified gum. |
| |
| Keywords: | Different processes Ozone aging Ozone cracking Thermal aging |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《热带作物学报》浏览原始摘要信息 |
| 点击此处可从《热带作物学报》下载免费的PDF全文 |
|
