|
|||||
|
|
| 汽车前轮前束值算法研究 | |
| 引用本文： | 魏道高,李克强,金达锋,王霄锋,危银涛,胡能俊.汽车前轮前束值算法研究[J].农业机械学报,2006,37(10):35-37,18. |
| 作者姓名： | 魏道高 李克强 金达锋 王霄锋 危银涛 胡能俊 |
| 作者单位： | 1. 合肥工业大学机械与汽车工程学院 230009 合肥市 2. 清华大学汽车工程系 100084 北京市 3. 安徽扬子汽车总厂技术中心 239000 滁州市 |
| 摘 要： | 基于1026型运输车前轮侧滑试验,回归得出该车前轮侧滑量与前束值关系数学表达式.将样车最小试验侧滑量对应的前束值与理论公式计算的前束值进行比较分析和修正,获得较为精确的前束值计算式.本文旨在建立计算样车前束值的半经验公式,为样车前轮定位参数与动态性能优化提供更为精确的数学模型. |
| 关 键 词： | 汽车 前束 侧滑 外倾角 算法 |
| 收稿时间： | 06 6 2005 12:00AM |
| 修稿时间： | 2005-06-06 |
Analysis of the Precise Calculation of Toe-in of Front Wheel Based on a 1026 Model Truck |
|
| Wei Daogao,Li Keqiang,Jin Dafeng,Wang Xiaofeng,Wei Yintao,Hu Nengjun.Analysis of the Precise Calculation of Toe-in of Front Wheel Based on a 1026 Model Truck[J].Transactions of the Chinese Society of Agricultural Machinery,2006,37(10):35-37,18. | |
| Authors: | Wei Daogao Li Keqiang Jin Dafeng Wang Xiaofeng Wei Yintao Hu Nengjun |
| Institution: | 1.Hefei University of Technology 2.Tsinghua University 3.Yangzi Automobile Works |
| Abstract: | For years the precise calculation of toe-in has been researched, because it is needed by the control toe-in tracing camber (It is being researched) and simulation of handle and steady. As the relation of toe-in and camber is effected by lots of aspects, the precise formula is difficult to be founded in theory. Based on the sideslip test to a 1026 model truck, the equal of sideslip amount and toe-in was regressed, toe-in of test has been founded. Theory of toe-in has been compared to it, the modification has been done, and a semi-empirical formula was founded according to the theory and test with the purpose of setting up the precise calculation and use it in the simulation of sample vehicle, providing references for the design of aligning parameters of four wheels of the vehicles. |
| Keywords: | Truck Toe-in (out) Sideslip Camber Calculating method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |