| 棉秆切碎器的浮动夹持喂入机构设计 |
| |
| 引用本文： | 邱灶杨,董世平,刘天舒,赵赫,陈月锋.棉秆切碎器的浮动夹持喂入机构设计[J].农机化研究,2011,33(5). |
| |
| 作者姓名： | 邱灶杨 董世平 刘天舒 赵赫 陈月锋 |
| |
| 作者单位： | 中国农业机械化科学研究院,北京,100083 |
| |
| 基金项目： | 国家“863”计划项目(2009AA043601) |
| |
| 摘 要： | 针对棉秆切碎收获机械介绍了一种新型带自调节、夹紧和主动输入功能的喂入机构。同时,对其结构组成、工作原理和关键部件参数设计分别进行了详述,并验算了最大通过量,分析了几种改变切碎长度的方法。实践表明,该机构还可适用于其它硬质冠状秸秆切碎前的强制喂入,具有结构简单、稳定性好、使用维修方便以及使用寿命长等特点。
|
| 关 键 词： | 棉秆切碎器 浮动 夹持输送 齿辊 机构 |
Floating Gripping Delivery Mechanism of Cotton Stalker Shreder |
| |
| Qiu Zaoyang,Dong Shiping,Liu Tianshu,Zhao He,Chen Yuefeng.Floating Gripping Delivery Mechanism of Cotton Stalker Shreder[J].Journal of Agricultural Mechanization Research,2011,33(5). |
| |
| Authors: | Qiu Zaoyang Dong Shiping Liu Tianshu Zhao He Chen Yuefeng |
| |
| Institution: | Qiu Zaoyang,Dong Shiping,Liu Tianshu,Zhao He,Chen Yuefeng(Chinese Academy of Agricultural Mechanization Sciences,Beijing 100083,China) |
| |
| Abstract: | A new type of mechanism with self-correcting,gripping delivery and driving toothed roll was developed in this paper.The structure of the device,the working principle and the parameters designing of key parts had been detailed introduced.Furthermore,checking computations the maxmium passing rate of cotton stalk,analysing several methods of changing the length of stalk shreding.The practices indicate that this mechanism can also apply to other hard stems force-feeding before shredding.It has the features such... |
| |
| Keywords: | cotton stalker shredding floating gripping delivery toothed roll mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
