| 重组材板柸铺装均匀性检测装置的开发研究 |
| |
| 引用本文： | 张毅,郭康权,刘小燕.重组材板柸铺装均匀性检测装置的开发研究[J].农机化研究,2011,33(7). |
| |
| 作者姓名： | 张毅 郭康权 刘小燕 |
| |
| 作者单位： | 1. 西北农林科技大学机械与电子工程学院,陕西杨凌,712100
2. 西北农林科技大学理学院,陕西杨凌,712100 |
| |
| 基金项目： | 国际合作中日据点大学项目(08080704) |
| |
| 摘 要： | 针对棉秆重组材板柸铺装密度不均匀、传统检测手段设备昂贵和经济性差等不足,开发了一种在线无损伤棉秆重组材板柸铺装均匀性检测装置.该装置采用空气流作为检测介质,风速传感器作为主要检测装置,用喷胶装置标记板柸缺陷部位,人工在标记位置补充原料,以达到铺装均匀的目的。实验证明,当板柸铺装密度为0.07g/cm3,板柸铺装厚度在6~14cm,板柸运动速度为5cm/s,轴流风机出风速度为18.0~22.0m/s时,测量效果最佳。
|
| 关 键 词： | 棉秆 板柸铺装 均匀性 |
Study on the Device for Testing the Uniformity of Wood Composites Mat Forming |
| |
| Zhang Yi,Guo Kangquan,Liu Xiaoyan.Study on the Device for Testing the Uniformity of Wood Composites Mat Forming[J].Journal of Agricultural Mechanization Research,2011,33(7). |
| |
| Authors: | Zhang Yi Guo Kangquan Liu Xiaoyan |
| |
| Institution: | Zhang Yi a,Guo Kangquan a,Liu Xiaoyan b(a.College of Mechanical and Electric Engineering,2.College of Science,Northwest A&F University,Yangling 712100,China) |
| |
| Abstract: | This article designed a device for testing the uniformity of wood composites mat-forming,which pointed at many lacks such as unevenness of mat density distribution,the huge cost of traditional testing device and the low economy.This device took air current as the testing medium,used wind speed sensor as main testing tool and marked the mat defects by the colored adhesive of spray devices.Finally,the mat defects were added corresponding quantity of cotton stalk to reach the aim of even distribution.As been p... |
| |
| Keywords: | cotton stalk mat forming uniformity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
