| 节距10.26mm锯链最佳锯切工况的研究 |
| |
| 引用本文： | 王多绪,孔德刚.节距10.26mm锯链最佳锯切工况的研究[J].东北林业大学学报,1989,17(5):53-60. |
| |
| 作者姓名： | 王多绪 孔德刚 |
| |
| 作者单位： | 东北林业大学
(王多绪)，东北林业大学(孔德刚) |
| |
| 摘 要： | 本文选择影响锯链锯木过程的四个主要锯木参数,即;切削速度、同名齿进给量、锯口长度和进锯角为试验因素,以切削力、锯木功率、锯木生产率和单位锯切比功为试验指标(以下称锯切指标),在锯木试验台上进行正交试验,通过对试验结果进行极差分析,得出适合于节距10.26 mm锯链不同输出功率的最佳切削工况,这对动力链锯的设计、改进和使用具有一定的指导作用。
|
| 关 键 词： | 链锯 锯木参数 锯切指标 |
OPTIMAL CUTTING STATE OF A CHAIN SAW WITH THE PITCH OF 10.26 mm |
| |
| Wang Duoxu Kong Degang.OPTIMAL CUTTING STATE OF A CHAIN SAW WITH THE PITCH OF 10.26 mm[J].Journal of Northeast Forestry University,1989,17(5):53-60. |
| |
| Authors: | Wang Duoxu Kong Degang |
| |
| Institution: | Northeast Forestry University |
| |
| Abstract: | The four main cutting parameters such as; cutting speed, thickness of the cut pieces of wood, cuting length and angles, which may affect the cutting procedure were chosen as the test factors. And the cutting force, cutting power, cutting productivity and the unit cutting power were considered as test indexes. The orthogonal test was conducted on the test table. The optimal cutting condition for the chain saw with the pith of 10.26mm under different output power has been obtained. The results have significance for design, improvement and usage of the power chain saw. |
| |
| Keywords: | Chain saw Cutting parameters Cutting targets |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
