| 对辊式秸秆切碎装置的设计与试验 |
| |
| 引用本文： | 于泳涛,张吉旺,耿爱军,张智龙,杨启勇,张姬.对辊式秸秆切碎装置的设计与试验[J].农机化研究,2019(3):93-98. |
| |
| 作者姓名： | 于泳涛 张吉旺 耿爱军 张智龙 杨启勇 张姬 |
| |
| 作者单位： | 山东农业大学机械与电子工程学院;山东农业大学农学院;山东省园艺机械与装备重点实验室 |
| |
| 基金项目： | 中国博士后基金项目(207M612309);山东省农机装备研发创新计划(2017YF060);山东农业大学"双一流"协同创新团队项目粮食作物生产机械化(SYL2017XTTD14) |
| |
| 摘 要： | 当前秸秆粉碎还田机械多为近地面作业,工作中刀片不可避免地与土壤、石块等接触,导致刀刃迅速磨损变钝,刀片不能有效地切断秸秆纤维。为此,设计了一种对辊式秸秆切碎装置,核心部件为一个带刀片辊子和一个带槽辊子。通过对切碎过程的运动与受力分析,确定刀辊半径为47.5mm,刀片数为6把,刀刃长度为3 5 0 mm,刀刃角度为2 5°,刀片厚度为5 mm,刀棱高度为1 1 mm,槽孔最小宽度为1 0 mm。制作试验台并进行了试验,结果表明:槽孔宽度对切碎效果影响显著,当对辊转速为600r/min、槽孔宽度为10mm时,切碎效果最好,玉米秸秆能够被切碎成50mm的小段,秸秆切碎长度合格率为86.80%,均满足行业标准。该研究结果为进一步优化结构、工作参数及生产考核提供了参考。
|
| 关 键 词： | 秸秆还田 对辊切碎 试验台 |
Design and Test of Roller Strip Chopping Device |
| |
| Yu Yongtao,Zhang Ji.Design and Test of Roller Strip Chopping Device[J].Journal of Agricultural Mechanization Research,2019(3):93-98. |
| |
| Authors: | Yu Yongtao Zhang Ji |
| |
| Institution: | (College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an 271018, China;College of Agronomy, Shandong Agricultural University, Tai'an 271018, China;Shandong Provincial Key Laboratory of Horticultural Machineries and Equipments, Tai'an 271018, China) |
| |
| Abstract: | At present, the straw crushing and returning machine still working near ground, the blades were inevitably in contact with soil and stone lead them to blunt. Therefor an against-roller type straw cutting device was designed, the core parts of this device are a roller whit blades and a roller with groove. According to the analysis of the movement and force of the shredding process, the radius of the blades roller is 47.5 mm while the number of blades is 6, the length and angle of blade edge is 350mm and 25 ° separately, the thickness of blade is 5mm, the height of blade ridge is 11mm, and the minimum width of slot is 10 mm. The test results showed that the width of the slot has a significant effect on the chopping effect, and the best chopping effect happened when the speed of against-roller is 600 r/min and the width of slot is 10mm. At this time, the corn stalks can be cut into short section at 50mm, the qualified rate of straw cutting length is 86.80%, all the indexes meet the industry standards. The research results provide a reference for further optimization of the structure, working parameters and production evaluation. |
| |
| Keywords: | straw returning against-roller chopping test bench |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
