| 农用柴油机连杆有限元分析与结构优化 |
| |
| 引用本文： | 郑斌,刘永启.农用柴油机连杆有限元分析与结构优化[J].农机化研究,2010,32(6). |
| |
| 作者姓名： | 郑斌 刘永启 |
| |
| 作者单位： | 山东理工大学,交通与车辆工程学院,山东,淄博,255049 |
| |
| 基金项目： | 山东省自然科学基金项目(Y2006F63);;淄博市科技攻关项目(20062502) |
| |
| 摘 要： | 运用ANSYS软件对农用柴油机连杆进行了有限元分析,得到连杆的应力分布、安全系数和疲劳寿命的情况。计算结果表明:在最大压缩工况时,最大应力点位于连杆杆身与小头连接过渡处,其等效应力值为303MPa,安全系数为1.24;在最大拉伸工况时,最大应力点位于杆身与大头过渡的工字型截面处,其等效应力值为118MPa,安全系数为3.19。同时,根据计算结果对连杆结构进行了优化,从而提高了连杆的安全系数和疲劳寿命。
|
| 关 键 词： | 柴油机连杆 有限元分析 应力分布 结构优化 |
Finite Element Analysis and Structural Improvement of Connecting Rod of Agricultural Diesel Engine |
| |
| Zheng Bin,Liu Yongqi.Finite Element Analysis and Structural Improvement of Connecting Rod of Agricultural Diesel Engine[J].Journal of Agricultural Mechanization Research,2010,32(6). |
| |
| Authors: | Zheng Bin Liu Yongqi |
| |
| Institution: | School of Traffic and Vehicle Engineering/a>;Shandong University of Technology/a>;Zibo 255049/a>;China |
| |
| Abstract: | In this paper,with the ANSYS,stress distribution,safety factor and fatigue life of connecting rod were analyzed by using 3D finite element method. The results show that the exposed destructive position is the transition location of the small head and connecting shaft at maximum compression condition. Maximum stress is 303MPa. Safety factor is 1. 24. At maximum stretch condition,the exposed destructive position is I-shaped cross-section at the big head. Maximum stress is 118MPa. Safety factor is 3. 19. And s... |
| |
| Keywords: | connecting rod of diesel engine finite element analysis stress distribution structural improvement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
