| 精密排种器的特征造型及其装配关联设计--基于Solidworks |
| |
| 引用本文： | 杨文敏,官春云,吴明亮,陈社员,汤楚宙.精密排种器的特征造型及其装配关联设计--基于Solidworks[J].农机化研究,2006(3):110-113. |
| |
| 作者姓名： | 杨文敏 官春云 吴明亮 陈社员 汤楚宙 |
| |
| 作者单位： | 1. 湖南农业大学工程技术学院,长沙,410128
2. 湖南农业大学油料作物研究所,长沙,410128 |
| |
| 基金项目： | 农业部农业科技跨越计划，湖南省科技基金 |
| |
| 摘 要： | 为了提高排种器的改型设计和系列化设计的效率,基于Solidworks采用自上而下的设计方法对推种式型孔轮排种器进行三维特征造型和装配关联设计;同时,探讨了关键零件的三维特征造型过程中的技术要点和基于装配的关联设计的技术关键,动态模拟装配过程、关联产生二维工程图.
|
| 关 键 词： | 农业基础科学 特征造型 仿真 关联设计 精密排种器 油菜 |
| 文章编号： | 1003-188X（2006）03-0110-04 |
| 收稿时间： | 2005-03-21 |
| 修稿时间： | 2005年3月21日 |
Feature Modeling and Assembling Conjunction Design on Precision Seeder by Software Solidworks |
| |
| YANG Wen-min,GUAN Chun-yun,WU Ming-liang,CHEN She-yuan,TANG Chu-zhou.Feature Modeling and Assembling Conjunction Design on Precision Seeder by Software Solidworks[J].Journal of Agricultural Mechanization Research,2006(3):110-113. |
| |
| Authors: | YANG Wen-min GUAN Chun-yun WU Ming-liang CHEN She-yuan TANG Chu-zhou |
| |
| Abstract: | In order to improve the efficiency of remodel-design and serious-design. This paper presents methods based on parameterized feature modeling and assembling conjunction design on type hole wheel seed meter using three-dimensional feature modeling software solid works which can design from up to down. The technique essentials and keys to the key parts modeling and assembling conjunction design process were discussed. And dynamic simulation of assembling process and conjunctional production of two dimensional drawing were conducted. And the basis for this parts being used to produce by CAE/CAM was provided. |
| |
| Keywords: | Solidworks |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
