| 基于有限元技术的疲劳寿命分析 |
| |
| 引用本文： | 王启唐,韩兵,王岐燕,朱茂桃.基于有限元技术的疲劳寿命分析[J].拖拉机与农用运输车,2007,34(3):76-77,86. |
| |
| 作者姓名： | 王启唐 韩兵 王岐燕 朱茂桃 |
| |
| 作者单位： | 江苏大学,汽车与交通工程学院,江苏,镇江,212013 |
| |
| 摘 要： | 叙述了有限元技术在疲劳寿命预测中的应用和一般的分析过程;着重介绍了疲劳载荷历程的合成规则和表面节点应力状态的判断方法;归纳评述了常用的多轴疲劳损伤模型;针对结构中普遍存在的焊缝焊点给出了具体的疲劳寿命分析方法;最后给出驱动桥壳疲劳寿命分析实例,计算结果和试验数据基本一致,说明基于有限元法的疲劳寿命预测是切实可行的,可以降低成本,缩短研发周期。
|
| 关 键 词： | 疲劳寿命 多轴疲劳 临界平面 有限元 |
| 文章编号： | 1006-0006（2007）03-0076-02 |
| 修稿时间： | 2006-08-10 |
Fatigue Life Analysis Based on Finite Element Technology |
| |
| WANG Qi-tang,HAN Bing,WANG Qi-yan,ZHU Mao-tao.Fatigue Life Analysis Based on Finite Element Technology[J].Tractor & Farm Transporter,2007,34(3):76-77,86. |
| |
| Authors: | WANG Qi-tang HAN Bing WANG Qi-yan ZHU Mao-tao |
| |
| Institution: | School of Automobile and Traffic Engineering,Jiangsu University, Zhenjiang 212013, China |
| |
| Abstract: | The application of finite element method on fatigue life analysis and general analysis process were presented.The methods of making fatigue load histories and assessing the stress condition for surface nodes were introduced.Some frequently used multiaxial fatigue criterias were summarized,and concise assessment was provided.The concrete fatigue life ananlysis methods of welding seams and spot joints in engineering structures were given.Finally,an example of fatigue life analysis of automotive drive axle housing was provided.The analysis results basically coincide with the test.So it is possible to simulate fatigue life based on CAE technology.The application of this method will reduce the design expense and shorten the design period. |
| |
| Keywords: | Fatigue life Multiaxial fatigue Critical plane Finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
