首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 234 毫秒
1.
Five hundred thirty-four steers were evaluated over a 2-yr period to develop and validate prediction equations for estimating carcass composition from live animal ultrasound measurements and to compare these equations with those developed from carcass measurements. Within 5 d before slaughter, steers were ultrasonically measured for 12th-rib fat thickness (UFAT), longissimus area (ULMA), rump fat thickness (URPFAT), and body wall thickness (UBDWALL). Carcasses were fabricated to determine weight (KGRPRD) and percentage (PRPRD) of boneless, totally trimmed retail product. Data from steers born in Year 1 (n = 282) were used to develop prediction equations using stepwise regression. Final models using live animal variables included live weight (FWT), UFAT, ULMA, and URPFAT for KGRPRD (R2 = 0.83) and UFAT, URPFAT, ULMA, FWT, and UBDWALL for PRPRD (R2 = 0.67). Equations developed from USDA yield grade variables resulted in R2 values of 0.87 and 0.68 for KGRPRD and PRPRD, respectively. When these equations were applied to steers born in Year 2 (n = 252), correlations between values predicted from live animal models and actual carcass values were 0.92 for KGRPRD, and ranged from 0.73 to 0.76 for PRPRD. Similar correlations were found for equations developed from carcass measures (r = 0.94 for KGRPRD and 0.81 for PRPRD). Both live animal and carcass equations overestimated (P < 0.01) actual KGRPRD and PRPRD. Regression of actual values on predicted values revealed a similar fit for equations developed from live animal and carcass measures. Results indicate that composition prediction equations developed from live animal and ultrasound measurements can be useful to estimate carcass composition.  相似文献   

2.
Circulating leptin concentrations could potentially be used as a predictor of production traits in cattle. This study aimed to clarify the correlations between circulating leptin concentrations and growth performance, carcass traits, and meat quality indexes in finishing bulls fed high‐concentrate diets (concentrate‐to‐forage ratio 70:30). Fifty‐seven Simmental × Luxi F1 crossbred bulls were used for 112‐day finishing experiment. Circulating leptin concentrations and relevant indexes of growth performance, and carcass traits and meat quality were measured during or after finishing trail. The results indicated that the leptin concentrations tended to be negatively correlated with dry matter intake (DMI) (r = ?.233, p = .081), and were positively correlated with 12th‐rib fat thickness (r = .330, p = .012), marbling score (r = .336, p = .011), and intramuscular fat content (r = .368, p = .021). Moreover, the leptin concentrations were negatively correlated with cholesterol content (r = ?.339, p = .037) and were not correlated with sensory indexes including tenderness, juiciness, and like flavor (p > .05). In conclusion, circulating leptin concentrations may potentially be used as a predictor of carcass traits related to content of fat and beef quality traits related to content of cholesterol in finishing bulls fed high‐concentrate diets.  相似文献   

3.
Live weight and ultrasound measures of fat thickness and longissimus muscle area were available on 404 yearling bulls and 514 heifers, and carcass measures of weight, longissimus muscle area, and fat thickness were available on 235 steers. Breeding values were initially estimated for carcass weight, longissimus muscle area, and fat thickness using only steer carcass data. Breeding values were also estimated for weight and ultrasound muscle area and fat thickness using live animal data from bulls and heifers, with traits considered sex-specific. The combination of live animal and carcass data were also used to estimate breeding values in a full animal model. Breeding values from the carcass model were less accurate and distributed more closely around zero than those from the live data model, which could at least partially be explained by differences in relative amounts of data and in phenotypic mean and heritability. Adding live animal data to evaluation models increased the average accuracy of carcass trait breeding values 91, 75, and 51% for carcass weight, longissimus muscle area, and fat thickness, respectively. Rank correlations between breeding values estimated with carcass vs live animal data were low to moderate, ranging from 0.16 to 0.43. Significant rank changes were noted when breeding values for similar traits were estimated exclusively with live animal vs carcass data. Carcass trait breeding values estimated with both live animal and carcass data were most accurate, and rank correlations reflected the relative contribution of carcass data and their live animal indicators. The addition of live animal data to genetic evaluation of carcass traits resulted in the most significant carcass trait breeding value accuracy increases for young replacements that had not yet produced progeny with carcass data.  相似文献   

4.
Commercial slaughter steers (n = 329) and heifers (n = 335) were selected to vary in frame size, muscle score, and carcass fat thickness to study the effectiveness of live evaluation and ultrasound as predictors of carcass composition. Three trained personnel evaluated cattle for frame size, muscle score, fat thickness, longissimus muscle area, and USDA quality and yield grade. Live and carcass real-time ultrasound measures for 12th-rib fat thickness and longissimus muscle area were taken on a subset of the cattle. At the time of slaughter, carcass ultrasound measures were taken at "chain speed." After USDA grade data were collected, one side of each carcass was fabricated into boneless primals/subprimals and trimmed to .64 cm of external fat. Simple correlation coefficients showed a moderately high positive relationship between 12th rib fat thickness and fat thickness measures obtained from live estimates (r = .70), live ultrasound (r = .81), and carcass ultrasound (r = .73). The association between estimates of longissimus muscle area and carcass longissimus muscle area were significant (P < .001) and were higher for live evaluation (r = .71) than for the ultrasonic measures (live ultrasound, r = .61; carcass ultrasound, r = .55). Three-variable regression equations, developed from the live ultrasound measures, explained 57% of the variation in percentage yield of boneless subprimals, followed by live estimates (R2 = .49) and carcass ultrasound (R2 = .31). Four-variable equations using frame size, muscle score, and selected fat thickness and weight measures explained from 43% to 66% of the variation for the percentage yield of boneless subprimals trimmed to .64 cm. Live ultrasound and(or) live estimates are viable options for assessing carcass composition before slaughter.  相似文献   

5.
This study was conducted to determine and compare the live traits, carcass yield and the physical, chemical, processing and sensory properties of meat from 20 Brahman grade cattle (crossbred cattle) and crossbred water buffalo (Philippine carabao × Murrah, Bulgarian or Indian) with an average age and weight of 29 months and 434 kg, respectively. The animals were fed a similar diet for 180 days before slaughter. A survey was performed to establish consumer meat preference between the two species. Live weights before slaughter of the two species were found to be different (P < 0.05) with the crossbred water buffalo showing higher bodyweight. However, the crossbred water buffalo had a lower (P < 0.05) dressing yield based on hot carcass weight and chilled carcass weight. The lower dressing yield of crossbred water buffalo can be attributed to its higher (P < 0.05) weights of edible and non‐edible slaughter by‐products. The chilled carcass yield of the forequarters and hindquarters from crossbred cattle and crossbred water buffalo were comparable when expressed as percent of live weight and chilled carcass weight. The estimated lean yield was higher in crossbred cattle than crossbred water buffalo. Crude protein, ash, fat, cholesterol, myofibrillar, sarcoplasmic and insoluble protein contents of the beef and carabao meat were all similar. Water holding capacity, pH, muscle fiber diameter, tenderness, firmness and marbling score in carabeef were all comparable to the beef. Redness was found to be higher (P < 0.05) in carabeef than the beef as measured with a color meter. The consumer meat preference survey showed that 55.9% selected the beef while 44.1% preferred carabeef. The color and amount of fat on the outside of the beef sample were primary in buyer selection.  相似文献   

6.
The relationships of live animal muscular and skeletal scores and ultrasound measurements and carcass conformation and fat scores with carcass composition and value were determined using 74 bulls. The animals consisted of 53 late-maturing breed crosses and 21 Holstein–Friesian slaughtered at 13 to 17 months of age. They were offered concentrates ad-libitum and 1 kg of grass silage dry matter per head daily for the final 139 day finishing period. Live animal muscular and skeletal scores and ultrasonic muscle and fat depth measurements of the M. longissimus dorsi were recorded at 8 to 12 months of age and pre-slaughter. Following slaughter, carcasses were classified for conformation and fatness and the right side of each carcass was dissected into meat, fat and bone. Carcass conformation and fat scores, (scale 1 to 15) ranged from 4.7 to 14.4 and 2.7 to 11.5, respectively. Pre-slaughter muscular scores showed significant positive correlations with kill-out proportion (r = 0.82), carcass meat proportion (r = 0.72), conformation score (r = 0.94), carcass value (r = 0.72), and the proportion of high-value meat cuts in the carcass (r = 0.49), and significant negative correlations with carcass bone (r = − 0.89) and fat (r = − 0.32) proportions. The associations between pre-slaughter muscular scores and proportion of high-value cuts in meat, perinephric plus retroperitoneal fat and fat score were not significant. Corresponding correlations with muscular scores at 8 to 12 months of age were generally lower than those recorded pre-slaughter. Correlations of ultrasound muscle depth with carcass traits showed similar trends but lower values to those obtained using the muscular scoring procedure. Ultrasound fat depth pre-slaughter was positively correlated with carcass fat proportion (r = 0.56) and fat score (r = 0.54), and negatively correlated with carcass meat proportion, proportion of high-value cuts and carcass value. Correlations with other carcass traits were not significant. Correlations of live animal skeletal scores with carcass traits were generally non-significant. A one unit (scale 1–15) increase in carcass conformation score was associated with significant increases in kill-out proportion, meat yield and carcass value of 11.9 g/kg, 11.9 g/kg and 5.8 cent/kg, respectively. Corresponding effects for a one unit change in fat score were − 2.9 g/kg, − 11.1 g/kg and − 4.9 c/kg. In conclusion, live animal muscular scores and ultrasound measurements and carcass conformation and fat scores were shown to be useful predictors of carcass composition and value.  相似文献   

7.
The carcass composition of crossbred Japanese Black × Limousin F2 cattle was examined in order to find an accurate carcass composition equation. The test animals included 17 steers and 17 heifers. The 28 image measurements from the area encircling the vertical line to the thoracic vertebra and the line from the thoracic vertebra between the sixth and seventh rib‐bones were measured by computer image analysis. The relationships between the 29 parameters that added the carcass left side weight of the animal and the carcass composition were suggested. The carcass composition included muscle weight, muscle ratio, fat weight and fat ratio. The carcass composition from steers was estimated by an equation composed of these three or four parameters (R2 = 90.80%, 79.30%, 90.75% and 73.70%, respectively). The selected parameters were measured without cutting the thoracic vertebra. The carcass composition from heifers was estimated by an equation composed of two to four parameters (R2 = 96.15%, 90.98%, 93.60% and 88.22%, respectively). The parameters for the estimation of the muscle and fat weight, and muscle and fat ratio are very similar. Furthermore, the equations using the parameters could estimate the carcass composition from the Japanese Black × Limousin cattle resource population.  相似文献   

8.
This study investigated an objective method for estimating beef marbling using ultrasonic images of the Iliocostalis muscle and the Lomgissimus muscle area sections. Thirty‐one Japanese Black cattle steers were used in this study. The end of the left side shoulder blade bone was scanned using an ultrasonic device. Ultrasonic images were captured of the Longissimus muscle area and that around the Iliocostalis muscle area. Twenty items were measured in the two images using computer image analysis software. The level of beef marbling was measured according to the Beef Marbling Standard (BMS) for carcass grading, and the percentage of ether‐extractable fat content in the Longissimus muscle (EE). The difference in the gray level between the Iliocostalis muscle and intermuscular fat (X10) was used to estimate the BMS and the EE, which were highly correlated (r2 = 67.72% and 61.30%). An equation was developed using four parameters from the two ultrasonic images, which could estimate the BMS (r2 = 85.88%). This equation could also estimate the EE (r2 = 68.98%). The equations used to estimate beef marbling were based on one to four parameters that included X10. Thus, ultrasonic images of the Iliocostalis muscle area section are important for estimating beef marbling.  相似文献   

9.
This study was conducted to determine the ability of additional ultrasound measures to enhance the prediction accuracy of retail product and trimmable fat yields based on weight and percentage. Thirty-two Hereford-sired steers were ultrasonically measured for 12th-rib fat thickness, longissimus muscle area, rump fat thickness, and gluteus medius depth immediately before slaughter. Chilled carcasses were evaluated for USDA yield grade factors and then fabricated into closely trimmed, boneless subprimals with 0.32 cm s.c. fat. The kilogram weight of end-point product included the weight of trimmed, boneless subprimals plus lean trim weights, chemically adjusted to 20% fat, whereas the fat included the weight of trimmed fat plus the weight of fat in the lean trim. Prediction equations for carcass yield end points were developed using live animal or carcass measurements, and live animal equations were developed including ultrasound ribeye area or using only linear measurements. Multiple regression equations, with and without ultrasound rump fat thickness and gluteus medius depth, had similar R2 values when predicting kilograms of product and percentages of product, suggesting that these alternative variables explained little additional variation. Final unshrunk weight and ultrasound 12th-rib fat thickness explained most of the variation when predicting kilograms of fat. Rump fat and gluteus medius depth accounted for an additional 10% of the variation in kilograms of fat, compared with the equation containing final weight, ultrasound ribeye area, and ultrasound 12th-rib fat thickness; however, the two equations were not significantly different. Prediction equations for the cutability end points had similar R2 values whether live animal ultrasound measurements or actual carcass measurements were used. However, when ultrasound ribeye area was excluded from live animal predictions, lower R2 values were obtained for kilograms of product (0.81 vs 0.67) and percentages of product (0.41 vs 0.17). Conversely, the exclusion of ultrasound ribeye area had little effect on the prediction accuracy for kilograms of fat (0.75 vs 0.74) and percentage fat (0.50 vs 0.40). These data substantiate the ability of live animal ultrasound measures to accurately assess beef carcass composition and suggest that the alternative ultrasound measures, rump fat and gluteus medius depth, improve the accuracy of predicting fat-based carcass yields.  相似文献   

10.
Marbling, defined by the amount and distribution of intramuscular fat, is an economically important trait of beef cattle in Japan. The c2‐11#2 expressed sequence tag (EST) has been previously shown to possess expression difference in musculus longissimus muscle between low‐marbled and high‐marbled steer groups, and to be located within genomic region of a quantitative trait locus for marbling. Thus, the ribosomal protein L27a (RPL27A) gene containing the c2‐11#2 EST sequence was considered as a positional candidate for the gene responsible for marbling. In the present study, a single nucleotide polymorphism (SNP) in the promoter region of the RPL27A, referred to as g.3109537C>T, was detected between the 2 steer groups. The SNP was associated with the predicted breeding value for beef marbling standard number by the analyses using Japanese Black beef cattle population. The effect of genotypes of the SNP on the predicted breeding value for subcutaneous fat thickness was not statistically significant. These findings suggest that the RPL27A SNP may be useful for effective marker‐assisted selection to increase the levels of marbling in Japanese Black beef cattle.  相似文献   

11.
Genetic parameters for carcass grading traits, image analysis traits, and monounsaturated fatty acid (MUFA) percentages were estimated in 29,942 Japanese Black cattle from Hyogo Prefecture. The analyzed traits included five carcass grading traits, two image analysis traits, fat area ratio and fineness index, and two MUFA traits, one measured in intermuscular fat using near-infrared spectroscopy (NIRS) and the other in intramuscular fat using gas chromatography (GC). The heritability estimates of image analysis traits and MUFA were moderate to high, ranging from 0.395 to 0.740, and it was considered that they could be improved simultaneously with carcass grading traits because no severe genetic antagonism was observed. Although the heritability of the NIRS-based intermuscular MUFA was slightly lower than that of the GC-based intramuscular MUFA, the genetic correlation between the two methods was as high as 0.804. These results indicate that the NIRS method can be used as an alternative evaluation procedure to predict MUFA in intramuscular fat in the longissimus muscle.  相似文献   

12.
From a calibration trial involving computer tomography (CT) scanning and dissection of 45 lambs, a prediction equation was derived to estimate total internal fat weight in Scottish Blackface lambs from measurements taken on cross‐sectional CT images. Using data from two cross‐sectional images (at the hip and loin) internal fat can be predicted with relatively high accuracy (adjusted R2 = 62.2%, r = 0.79). The derived equation was then used to predict internal fat weights in a further 427 Scottish Blackface lambs from a separate trial. Phenotypic correlations were calculated between predicted internal fat weight and weights of total carcass fat, muscle and bone, predicted using previously derived equations. When considering absolute tissue weights, adjusted for fixed effects, internal fat showed the strongest positive correlation with carcass fat (0.58), followed by muscle (0.36), and then by bone (0.32). When tissue weights were adjusted for fixed effects and total carcass weight (so considering tissue weights relative to size), internal fat showed a lower correlation with carcass fat weight (0.36) and negative correlations with muscle (?0.35) and bone (?0.19). These results provide the basis for more complex studies of relationships (phenotypic and genetic) between internal fat in hill lambs and economically important traits, such as carcass composition and survival of lambs, and tissue levels in different depots in hill ewes.  相似文献   

13.
This study was conducted to determine the live weights at which large-, medium-, and small-framed feeder steers and heifers attain a degree of finish associated with a carcass quality grade of low Choice and to examine the relationship of feeder cattle muscle thickness to carcass yield grade traits. Feeder steers (n = 401) and heifers (n = 463) representing three age classes (calf, yearling, long yearling) were selected randomly at a commercial feedlot to exhibit wide ranges in frame size and muscularity. Individual weights were recorded and a panel of five experienced evaluators scored each animal for frame size, muscle thickness, and flesh condition. The cattle were finished on a high-concentrate finishing diet and harvested at an estimated carcass fat thickness of 10 mm. Final weights and USDA carcass grade data were collected for all cattle. Frame size scores effectively predicted finished weight at a marbling end point of Small(00) for both heifers (r2 = 0.89, SE = 16 kg) and steers (r2 = 0.94, SE = 13 kg). For heifers, the Small/Medium and Medium/ Large frame score intersects corresponded to live weights of 460 kg and 520 kg, respectively. For steers, the Small/Medium and Medium/Large frame score lines corresponded to live weights of 504 kg and 577 kg, respectively. These weights were greater than weights specified in the 1979 USDA grade standards. Evaluations of feeder cattle muscling, based on 1979 USDA Standards, were associated (P < 0.05) with differences in longissimus muscle area but were not related (P = 0.08) to differences in numerical carcass yield grades. An alternative muscle thickness classification scheme, involving the use of four thickness classes, was effective for stratifying feeder cattle according to eventual differences (P = 0.004) in carcass yield grade. Our findings suggest that USDA feeder cattle grade standards developed in 1979 are no longer adequate for describing today's population of feeder cattle.  相似文献   

14.
Selection for growth and improved carcass merit has resulted in cattle that are variable in composition of gain during the finishing phase. This study assessed the relative performance among cattle with different levels of initial backfat thickness. It also exploited the ability to track carcass composition in the live animal with ultrasound estimates of backfat and marbling. A procedure was developed to partition and estimate relative efficiency of fat and protein gain. The trial periods were the last 43 or 50 d before slaughter and included 10 pens (average of 27 animals per pen) that ranged in average backfat thickness from 6.3 to 13.1 mm. There was no correlation (r2 = 0.0026) between average backfat thickness and G:F (g/kg of DMI). Correlations between average backfat thickness and ADG or DMI were also nearly zero (r2 = 0.0007 and 0.0042, respectively). Fat deposition from NEg was 3.98 times more efficient than protein deposition. Carcass backfat thickness was a poor predictor of carcass marbling score (r2 = 0.083), even though backfat thickness was an important predictor of the percentage of empty body fat (r2 = 0.807). The results indicate that a measure of backfat thickness on the live animal during the finishing phase is not an effective predictor of future feed efficiency. They also confirm that protein accretion is energetically expensive, and that using a single coefficient for predicting gain from NEg is valid regardless of whether gain is predominantly muscle or fat. These data document that there is little relationship between body composition and marbling score, which is contrary to models that assume a USDA quality grade target at a specified percent fat end point.  相似文献   

15.
This experiment was conducted to explore the association between perilipin (PLIN) gene and carcass and meat quality traits in Yanbian Yellow cattle.In this study,70 30-month-old healthy Yanbian Yellow cattle were used as experimental materials,the blood of jugular vein and its 12-13 intercostal longissimus muscle dorsi were collected to extract DNA samples of Yanbian Yellow cattle,and determine the carcass and meat quality characteristics.The SNP of PLIN gene was detected by direct sequencing,and the correlation analysis was conducted based on the carcass and meat quality data of Yanbian Yellow cattle and the genetic polymorphism of PLIN gene.The results showed that there were 2 SNPs of PLIN gene exon 3 in Yanbian Yellow cattle:g.103 C→T and g.156 T→C,both of them were missense mutations.g.103 C→T contained two genotypes:CC and CT,CC genotype was the dominant genotype,the genotype frequency was 0.81,C was the dominant allele,the gene frequency was 0.90.The intramuscular fat,pre slaughter weight,carcass weight and back fat thickness of CT genotype was significantly higher than those of CC genotype(P<0.05).g.156 T→C contained two genotypes:TT and TC,TT genotype was the dominant genotype,the genotype frequency was 0.83,T was the dominant allele,the gene frequency was 0.92.The pre slaughter weight,carcass weight and back fat thickness of TC genotype were significantly higher than those of TT genotype (P<0.05).Chi square test showed that the two SNPs of PLIN gene in Yanbian Yellow cattle reached Hardy-Weinberg equilibrium (P>0.05),and belonged to low polymorphism (PIC<0.25).In conclusion,g.103 C→T and g.156 T→C of PLIN gene had potential effect on carcass and meat quality traits in Yanbian Yellow cattle,and could be used as a candidate gene and potential molecular marker of Yanbian Yellow cattle.  相似文献   

16.
为探究延边黄牛脂滴包被蛋白（perilipin，PLIN）基因遗传多态性及其对胴体和肉质性状的影响，试验选取70头30月龄健康延边黄牛公牛，采集颈静脉血液及其12~13肋间背最长肌以提取延边黄牛DNA样本，并测定胴体与肉质性状，采用直接测序方法检测PLIN基因SNP位点，结合延边黄牛胴体、肉质数据与PLIN基因遗传多态性进行关联分析。结果显示，在延边黄牛PLIN基因外显子3 103与156 bp处存在2个突变位点：g.103 C→T和g.156 T→C，均为错义突变。g.103 C→T位点存在CC、CT两种基因型，CC基因型为优势基因型（0.81），C基因为优势等位基因（0.90），表现为CT基因型个体脂肪含量、宰前重、胴体重、背膘厚均显著高于CC基因型个体（P<0.05）；g.156 T→C位点存在TC、TT两种基因型，TT基因型为优势基因型（0.83），T基因为优势等位基因（0.92），表现为TC基因型个体的宰前重、胴体重及背膘厚均显著高于TT基因型个体（P<0.05）。卡方检验结果表明，延边黄牛在PLIN基因外显子3的2个SNPs位点均达到Hardy-Weinberg平衡（P>0.05），杂合度较低，属于低度多态（PIC<0.25）。综上，PLIN基因g.103 C→T和g.156 T→C位点对延边黄牛部分胴体与肉质性状存在一定影响，该位点可作为延边黄牛胴体、肉质性状的潜在标记，PLIN基因可以作为延边黄牛品种选育的候选基因和潜在分子标记。  相似文献   

17.
The fatty acid composition of adipose tissue in beef has been recognized as an important trait because of its relationship with beef quality, including favorable beef flavor and tenderness. Over the last decade, we have tried to identify the genes responsible for the fatty acid composition in cattle, and have found the following. (i) Genetic polymorphism of stearoyl‐CoA desaturase (SCD) is one of the responsible genes associated with fatty acid composition. The average effects of gene substitution of the SCD type A gene on the monounsaturated fatty acid (MUFA) percentage and the melting point of intramuscular fat were approximately +1.0% and ?1.0°C, respectively. (ii) Intron polymorphism of sterol regulatory element binding protein–1 (SREBP‐1) also affected MUFA. (iii) No effect of SCD or SREBP‐1 genotypes on any representative carcass traits of Japanese Black in the field population was observed. (iv) Additional genetic markers adipocytes fatty acid binding protein 4 (FABP4) and liver X receptor α also affected the fatty acid composition. (v) SCD and FABP4 significantly affected fatty acid composition in Holstein steers. These findings will bring new insight into the fat‐related carcass traits of beef cattle and will thus contribute to the beef industry.  相似文献   

18.
In Ireland, the majority of dairy cows calve in spring and the male progeny are reared for beef as steers. Over half of all dairy calves are beef crosses with Aberdeen Angus and Belgian Blue representing two extremes in maturity type. The objective of this study was to compare different finishing systems in the autumn/winter of their second year for spring-born steers of contrasting maturity type. A total of 80 spring-born calves, 40 Aberdeen Angus × Holstein-Friesian (AA) and 40 Belgian Blue × Holstein-Friesian (BB) were reared together to 16 months of age. They were then blocked on live weight within breed type and assigned to a pre-experimental slaughter group and to four finishing groups namely: (i) pasture only for 94 days to slaughter, (ii) concentrates ad libitum indoors for 94 days to slaughter, (iii) pasture only for 94 days followed by concentrates ad libitum indoors for 95 days to slaughter, and (iv) concentrates ad libitum indoors for 189 days to slaughter. After slaughter, the 6–10th ribs joint was separated into its component tissues and a sample of m. longissimus was chemically analysed. Mean slaughter weights and carcass weights per day from arrival were 922 and 957 (s.e. 10.6)g, and 476 and 511 (s.e. 6.1) g for AA and BB, respectively. Corresponding carcass weights, kill out proportions, ribs joint fat and muscle proportions, and m. longissimus lipid concentrations were 300 and 322 (s.e. 3.9) kg, 515 and 534 (s.e. 2.4) g/kg, 181 and 121 (s.e. 4.2) g/kg, 605 and 666 (s.e. 4.5) g/kg, and 42 and 25 (s.e. 2.5) g/kg, respectively. Mean daily live weight gains for the finishing treatments as listed were 714, 1539, 999 and 1186 (s.e. 32.0) g, respectively. Corresponding mean daily carcass gains, carcass weights, ribs joint fat proportions and m. longissimus lipid concentrations were 416, 901, 645 and 774 (s.e. 24.6) g, 252, 296, 336 and 359 (s.e. 5.5) kg, 76, 165, 154 and 210 (s.e. 5.9) g/kg, and 13, 34, 32 and 55 (s.e. 3.5) g/kg. It is concluded that BB had heavier carcasses of better conformation with less ribs joint fat and less intramuscular lipid than AA. Neither breed type had acceptably finished carcasses after 94 days on pasture, but both breed types had acceptably finished carcasses following concentrate feeding for 94 days. The carcasses of the BB animals on pasture for 94 days and then finished on concentrates were not acceptably finished and m. longissimus lipid concentration was < 25 g/kg. In contrast, the carcasses of the AA animals finished on concentrates for 189 days were over fat and m. longissimus lipid concentration was > 65 g/kg.  相似文献   

19.
The most widely used system to predict percentage of retail product from the four primal cuts of beef is USDA yield grade. The purpose of this study was to determine whether routine ultrasound measurements and additional rump measurements could be used in place of the carcass measurements used in the USDA yield grade equation to more accurately predict the percentage of saleable product from the four primals. This study used market cattle (n = 466) consisting of Angus bulls, Angus steers, and crossbred steers. Live animal ultrasound measures collected within 7 d of slaughter were 1) scan weight (SCANWT); 2) 12th- to 13th-rib s.c. fat thickness (UFAT); 3) 12th- to 13th-rib LM area (ULMA); 4) s.c. fat thickness over the termination of the biceps femoris in the rump (URFAT; reference point); 5) depth of gluteus medius under the reference point (URDEPTH); and 6) area of gluteus medius anterior to the reference point (URAREA). Traditional carcass measures collected included 1) HCW; 2) 12th-to 13th-rib s.c. fat thickness (CFAT); 3) 12th- to 13th-rib LM area (CLMA); and 4) estimated percentage of kidney, pelvic, and heart fat (CKPH). Right sides of carcasses were fabricated into subprimal cuts, lean trim, fat, and bone. Weights of each component were recorded, and percentage of retail product from the four primals was expressed as a percentage of side weight. A stepwise regression was performed using data from cattle (n = 328) to develop models to predict percentage of retail product from the four primals based on carcass measures or ultrasound measures, and comparisons were made between the models. The most accurate carcass prediction equation included CFAT, CKPH, and CLMA (R2 = 0.308), whereas the most accurate live prediction equation included UFAT, ULMA, SCANWT, and URAREA (R2 = 0.454). When these equations were applied to a validation set of cattle (n = 138), the carcass equation showed R2 = 0.350, whereas the ultrasound data showed R2 = 0.460. Ultrasound measures in the live animal were potentially more accurate predictors of retail product than measures collected on the carcass.  相似文献   

20.
Data from 534 steers representing six sire breed groups were used to develop live animal ultrasound prediction equations for weight and percentage of retail product. Steers were ultrasonically measured for 12th-rib fat thickness (UFAT), rump fat thickness (URPFAT), longissimus muscle area (ULMA), and body wall thickness (UBDWALL) within 5 d before slaughter. Carcass measurements included in USDA yield grade (YG) and quality grade calculations were obtained. Carcasses were fabricated into boneless, totally trimmed retail products. Regression equations to predict weight and percentage of retail product were developed using either live animal or carcass traits as independent variables. Most of the variation in weight of retail product was accounted for by live weight (FWT) and carcass weight with R2 values of 0.66 and 0.69, respectively. Fat measurements accounted for the largest portion of the variation in percentage of retail product when used as single predictors (R2 = 0.54, 0.44, 0.23, and 0.54 for UFAT, URPFAT, UBDWALL, and carcass fat, respectively). Final models (P < 0.10) using live animal variables included FWT, UFAT, ULMA, and URPFAT for retail product weight (R2 = 0.84) and UFAT, URPFAT, ULMA, UBDWALL, and FWT for retail product percentage (R2 = 0.61). Comparatively, equations using YG variables resulted in R2 values of 0.86 and 0.65 for weight and percentage of retail product, respectively. Results indicate that live animal equations using ultrasound measurements are similar in accuracy to carcass measurements for predicting beef carcass composition, and alternative ultrasound measurements of rump fat and body wall thickness enhance the predictive capability of live animal-based equations for retail yield.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号