首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The objective was to study the potential of grain by-products (husk) of grains such as wheat (Triticum aestivum L; German name is Weizen) and rice (Oryza sativa) as reinforcements for thermoplastics as an alternative to or in combination with wood fibres. Prior to composites preparation, the chemical components of fibres such as cellulose, hemi-cellulose, lignin, starch, protein and fat were measured and the surface chemistry and functionality of grain by-products were studied using EDX and FT-IR. Structural constituents (cellulose, starch) were found in wheat husk (W) equal 42%, in rice husk 50% and in soft wood 42%, respectively. Thermal degradation characteristics, the bulk density, water absorption and the solubility index were also investigated. Wheat husk (W) and rice husk were found thermally stable at temperatures as low as 178 °C and 208 °C, respectively. The particle morphology and particle size were investigated using microscopy. Water absorption properties of the fibres were studied to evaluate the viability of these fibres as reinforcements. Polypropylene composites were fabricated using a high speed mixer and an ensuing injection moulding process with 40 wt% fibre. The tensile and Charpy impact strength of the resulting composites were investigated. The tensile elongation at break was found to 75% for wheat husk (W) composites and 23% for rice husk composites better than soft wood composites. Rice husk composites showed 13% better Charpy impact strength than soft wood composites. Due to coupling agent, tensile strength of composites found to improve 25% for soft wood, 35% for wheat husk (W) and 45% for rice husk.  相似文献   

2.
《Plant Production Science》2013,16(3):307-315
Abstract

The effects of elevated carbon dioxide concentration ([CO2]) on silica deposition on husk epidermis of rice (Oryza sativa L. cv. Akitakomachi) during the flowering stage were investigated in this study. The study was motivated by the concept that the rice yield maybe affected by global warming as a result of elevated [CO2] environment since sterility of rice is related to the panicle silica content that influences transpiration, and elevated [CO2] could affect plant transpiration. Silica deposition analysis was focused on the flowering stage of the rice crop grown hydroponically under two [CO2] conditions: 350 μmol mol-1 (ambient) and 700 μmol mol-1 (elevated). Silica deposition on the husk epidermis from three parts of the panicle at four flowering stages were examined using a scanning electron microscope (SEM) combined with an energy dispersive X-ray microanalyzer (EDX). The results demonstrated that elevated [CO2] significantly suppressed silica deposition on the husk epidermis at the lower part of the panicle, and at the early flowering stage when 1/3 of the panicle emerged from the leaf sheath. In the transverse section analysis of the husk, silica deposition on the husk epidermis under elevated [CO2] was less than that under ambient [CO2] at the late flowering stage. The less silica deposition observed on the husks at the late flowering stage under elevated [CO2] might be related to the suppressed transpiration from the panicle by elevated [CO2] found in a previous study.  相似文献   

3.
Sodium adsorption ratio (SAR) is one of the water quality indexes that whose is important due to reuse or depletion to environment. Solutes in drain water can be controlled by adsorption, chemical or biological reaction, organic envelope of drainage. Rice husk is the common option of drainage envelops in paddy fields. In this study, the ability of reduction of SAR by rice husk was evaluated in batch scale and physical model of drain envelops. In the batch experiments, the adsorption of SAR parameters was investigated by adding 2 g of rice husk into a 100 ml of sodium chloride solution. The results indicated that rice husk absorbed calcium, magnesium and sodium, respectively. By increasing the temperature, contact time and pH, adsorption of calcium, magnesium and sodium was increased; however, the higher concentration of sodium in soil solution reduced the percentage of adsorption. In a more realistic state, physical models of subsurface drainage in the paddy fields were made. Drainage envelope treatments included of rice husk (H), combination of 20 and 60 % of husk with gravel (H20G80 and H60G40) and a pipe without envelope (NE). Due to higher drain discharge and more sodium removal (lower SAR in drain water), treatment H with the discharge of 16.2 ml/min and SAR of 1.27 (meq/l)0.5 was better in comparison with other treatments.  相似文献   

4.
Nanocrytalline cellulose (NCC) was isolated using cellulose extracted from two different precursor materials: Eucalyptus globulus and rice straw. The two ground precursor materials were autoclaved with a 10 % NaOH solution at 120 °C for 3 h. The alkali-treated precursor materials were bleached using sodium chlorite/acetic acid and sodium hypochlorite. The bleached precursor materials were acid-hydrolyzed in 65 % (w/w) sulfuric acid at 45 °C for 30-120 min. The changes in the chemical composition of the two precursor materials were studied before and after bleaching by Fourier transform infrared spectroscopy according to the NREL report and TAPPI standards. Hydrolyzates were characterized by X-ray diffractometry, thermogravimetric analysis, Zeta-potential analysis, and transmission electron microscopy. The results revealed that the physical properties of NCC were strongly dependent on the acid-hydrolysis time.  相似文献   

5.
In this study, biodegradable composites were prepared using cellulose nanowhiskers and poly(lactic acid). For processing at high temperature over 200 °C, cellulose nanowhiskers were prepared by ultra-sound treatment, with the high thermal stability of natural cellulose. The nanowhiskers were confirmed using transmission electron microscopy, X-ray diffraction, and thermo-gravimetric analysis. Surface modification of the cellulose nanowhiskers was performed to increase the adhesion between hydrophilic nanofillers and hydrophobic polymer matrix. The dynamic mechanical thermal analysis of the composites showed better reinforcing effect of the modified cellulose nanocrystals. The effects of cellulose nanowhiskers on the biodegradability of poly(lactic acid) were studied using a microbial oxidative degradation analyzer.  相似文献   

6.
The present study aimed to convert starch and potato peel waste to nanocrystals. Starch nanocrystals were prepared using two methodologies: direct acid hydrolysis and enzyme pretreatment followed by acid hydrolysis. Direct hydrolysis broke down the starch granules to nanocrystals in 12 days. Enzyme pretreatment with starch hydrolytic enzymes (α-amylase and amyloglucosidase) reduced the time for preparation of starch nanocrystals by 6 days. Starch nanocrystals of optimum size were obtained with both the treatments and the resultant size ranged from 10 to 50 nm. Nanocrystals were disk-like platelets in appearance. Cellulose nanocrystals were derived from cellulosic material in the potato peel. Cellulose was isolated from peel waste with alkali treatment. Further, cellulose nanocrystals from potato peel and cellulose microcrystalline were prepared by acid hydrolysis. Microscopic images revealed that the aqueous suspension of cellulose nanocrystals derived from potato peel were single rod shaped, whereas those derived from cellulose microcrystalline were rod-like nanoparticles, agglomerated in the form of bundles including some of the rods in single units (well separated). The size of potato peel nanocrystals ranged from 40 to 100 nm (length) and cellulose microcrystalline ranged from 4 to 20 nm (diameter) by 110 to 250, given 4 to 20 nm (length), respectively. As starch nanocrystals as well as cellulose nanocrystals are derived from biopolymer, both can be considered safe for humans and the environment. Moreover, the biodegradable nature of these nanocrystals makes them superior over metallic nanoparticles, particularly in the field of nanocomposites.  相似文献   

7.
The objective of this study was to investigate the effects of the application of rice husk biochar on selected soil physical properties, rice growth, including root extension, and methane (CH4) emissions from paddy field soil. Three replication experiments were conducted using outdoor pot experiments utilizing commercial rice husk biochar mixed with paddy soil at a rate of 0 (control), 2, and 4 % (weight biochar/weight soil) in which the rice was cultivated for 100 days under a continuously flooded condition. The physical properties of soils were analyzed before and after the growing periods. Some parameters of rice growth and CH4 emissions of paddy soils were monitored weekly during the experiment. Root extension was also analyzed after harvesting. The experiments showed that the application of rice husk biochar improved the physical properties of paddy soils. It led to a decrease in bulk density and an increase in saturated hydraulic conductivity, including the total pore volume as well as the available soil water content. The shoot height of rice plants was significantly higher in soil amended with 4 % biochar than that in the control soil. However, other plant growth parameters and root extension were only slightly affected by the application. It was also found that amending soil with biochar led to a reduction of the total CH4 emissions by 45.2 and 54.9 % for an application rate of 2 and 4 %, respectively, compared with the control. Our results showed that the higher the application rate, the stronger the effect of biochar was observed. More research is still necessary for a better understanding of the underlying mechanisms.  相似文献   

8.
This study optimizes the isolation parameters of cellulose nanoparticles (CNP) from kenaf fiber using central composite design (CCD). The extraction of CNP was based on three stages (i.e. 3 factors). The independent variables (factors) were NaOH dosage, amount of NaClO2, and sonication time, while the dependent variables (response) were CNP size quality and degradation temperature. Later, size quality responses were fitted with a quadratic polynomial model and degradation point responses with a 2-factor interaction model (2FI). The quadratic model and 2FI models resulted R2 values of 0.95 and 0.79, respectively. In addition, the morphological, thermal analysis, and Fourier transform infrared (FTIR) spectroscopy indicated a progressive removal of non-cellulosic constituents. Furthermore, transmission electron microscopy (TEM) confirmed reduction in fiber diameter from ~170 μm to ~100 nm. The optimal parameters for extraction of CNP were found to be 0.2 g of NaOH/4 g of fiber at first stage, 5 ml of NaClO2/4 g of fiber at the second stage, and 20 min of sonication period during the third stage. Moreover, obtained cellulose nanoparticles were thermally more stable at higher temperature.  相似文献   

9.
Rice husk charcoal (RC) produced from the pyrolysis of rice husk (RH) can be one of the cost-effective biochars for use in rice-based farming systems. This study investigated changes in rice yield and soil carbon sequestration over three years of RC application to an Andosol paddy field. The treatments were RC application at 0.02, 0.2, and 2 kg m?2 (RC0.02, RC0.2, and RC2, respectively), RH application at 0.2 kg m?2 (RH0.2), and a control with no RC or RH application (CONT). The results showed that RC2 increased culm length by 4% and straw weight by 14% on average over the three years. These increases in plant growth coincided with a higher level of silicon uptake by the rice plants, although they did not significantly affect grain yield. The soil carbon content was progressively increased by RC2 over the three years, whereas it was not significantly affected by RC0.02 or RC0.2. A considerable amount (>72%) of the applied carbon with RC2 remained in the soil by taking account of its downward movement below the 10 cm layer of the paddy field after three consecutive years of RC application. We conclude that rice husk charcoal application to Andosol paddy fields is an effective option for increasing carbon sequestration. Furthermore, the increase in silicon uptake by rice plants suggests that rice husk charcoal can also be functioning as a silicon fertilizer.  相似文献   

10.
The study based on pretreatment, hydrolyzation and separation processes with the raw material rice hull, provides a comprehensive utilization of the hydrolyzed productions, such as glucose (C6H12O6) from cellulose, silica (SiO2), and byproduct crystalline sodium sulfate (Na2SO4·10H2O). The optimum hydrolysis conditions are as follows: the concentration of H2SO4 is 72% (wt.%), the temperature is 50 °C, the ratio of H2SO4 solution volume (mL) to the rice hull mass (g) is 10:1 and the time is 5 min, the glucose yield rate reaches 45.6% (wt.%). The concentration of glucose solution could be 0.1 g/mL after neutralization measured by ultraviolet spectrophotometer (UV-VIS). Silica powder was below 50 nm characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The main byproduct crystalline sodium sulfate was featured by XRD and photographs.  相似文献   

11.
The effects of continuous or 2-cycle high hydrostatic pressure (HHP) treatments (200 and 600 MPa) on the microstructure and digestibility of rice starches were investigated. The morphological and structural changes were characterized using polarized light microscopy, scanning electron microscopy, atomic force microscopy, X-ray scattering and 13C CP/MAS NMR, and the starch digestibility was examined by in vitro hydrolysis. Results showed that HHP at 600 MPa significantly alters the microstructure and lowers the resistant starch (RS) compared with HHP at 200 MPa. Under the same pressure level, the two 15-min cycle treatment induced more structural disruption, gelatinization, disappearance of surface protrusion, and lower RS of rice starches than that of the continuous HHP treatment (30 min). Based on the results on RS, the two 15-min cycle HHP treatment at 200 MPa could be beneficial for improving the functionality of the rice starch.  相似文献   

12.
Rice husk is a by-product of rice milling process, and a great resource as a raw biomass material for manufacturing value-added composite products. One of the potential applications is to use rice husk as filler for manufacturing gypsum–rice husk boards for wall and ceiling materials for construction. We investigated the effect of rice husk, addition on selected physico-mechanical properties, total volatile organic compound (TVOC), and incombustibility, on the gypsum board. With increasing rice husk contents, water and moisture absorption was decreased. Because of the replacement of pore between gypsum particles by rice husk, the moisture absorption was decreased as rice husk adding contents. By rice husk adding, MOR of the gypsum–rice husk boards were increased up to 9.8 MPa at 30 wt%. However, MOR was decreased more than 40 wt% of adding contents. The modulus of elasticity (MOE) showed similar behavior with MOR. However, internal bonding strength (IB) was slightly increased as rice husk adding contents up to 20 wt%, 0.5 MPa and decreased over 20 wt%. The incombustibility of the gypsum–rice husk boards decreased on increasing the rice husk adding content. However, up to 30 wt% of rice husk adding contents board samples was of incombustibility first class. Gypsum particle can be replaced up to 30 wt% by rice husk with incombustibility first class for housing materials. In all cases, TVOC emission factor and formaldehyde emission remained under the ‘Excellent’ grade as defined by Korean Air Clean Association (KACA).  相似文献   

13.
The effects of pyrolysis temperature, heating rate, particle size, holding time, and gas flow rate were investigated to optimize bio-oil yield from rice husk pyrolysis. Thermogravimetric analysis showed thermal degradation of hemicellulose, cellulose and lignin, indicating faster decomposition of cellulose compared to lignin. The optimisation process was analysed by employing central composite design (CCD) in response surface methodology (RSM) using Design Expert Version 7.5.1 (StatEase, USA). A two-level fractional factorial was initially carried out and followed by RSM. The statistical analysis showed that pyrolysis temperature, heating rate, particle size and holding time significantly affected the bio-oil yield. By utilising response surface method, these four factors were investigated, analysed and optimal conditions were obtained at pyrolysis temperature of 473.37 °C, heating rate of 100 °C/min, particle size of 0.6 mm and holding time of 1 min. Confirmation runs gave 48.30% and 47.80% of bio-oil yield compared to 48.10% of predicted value. Furthermore, the pyrolytic bio-oils obtained from fixed-bed pyrolysis were examined using gas chromatographic/mass spectroscopy (GC/MS), Fourier transform infrared (FTIR) methods, elemental analyzer, pH probe and bomb calorimeter.  相似文献   

14.
Protease has been shown to be an effective food additive for improving the quality of gluten-free rice bread. In this study, we found that bacillolysin (Protin SD-NY10, metallo protease), papain (cysteine protease), and subtilisin (Protin SD-AY10, serine protease) increased the specific volume of gluten-free rice breads by 30–60% compared with untreated breads. These proteases also decreased crumb hardness by 10–30% compared with untreated breads. Many fine bubble cells were observed in the crumb of the protease-treated rice breads using scanning electron microscopy. Optical microscopic observation revealed fine networks of small protein aggregates stained by Coomassie Brilliant Blue (CBB) in the rice batter of the improved gluten-free rice breads. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) of protein in the rice batter suggested that the amount of low molecular weight proteins (less than 10 kDa) increased with the use of Protin SD-NY10, Protin SD-AY10 and papain treatments compared with untreated rice batter. Thus, we considered that the small proteins aggregates were formed through disulfide bonds. This fine network was effective for retaining CO2 gas during the fermentation process, resulting in an increase in the specific volume and a decrease in the crumb hardness of gluten-free rice bread.  相似文献   

15.
A comparative analysis of the elasticity, microstructure and thermal stability of fibres (thickness ranging from 43.4 to 189.4 µm) isolated from pineapple leaves (PALF), coconut coir (COIR), banana leaf-stem (BAN) and oil palm empty fruit bunch (OPEFB) reported in this study. Statistical analysis of the mechanical properties derived from tensile test to rupture reveals significant differences (P<0.05) in the fibre strength (σ), stiffness (E) and extensibility (parameterized by the strain to rupture, ?). It is observed that COIR fibres yield the smallest strength, σ (=99.8±22.5 MPa), and stiffness, E (= 0.5±0.1 GPa), while PALF fibres yield the largest σ (=639.5±301.6 MPa) and E (=7.1±3.1 GPa); PALF fibres exhibit the smallest ? (=0.11±0.03) but OPEFB fibres yield the largest ? (=2.0±1.3). From scanning electron micrographs, it is observed that cellulose fibril rupture predominates in OPEFB, COIR and BAN fibres; a large proportion of the cellulose fibrils fail by pullout in PALF fibres. Thermogravimetric analysis reveals that all fibres are thermally stable up to 250 °C; the fibre residue ranges from 30 to 80 wt% after heating to 500 °C. In particular, BAN experiences the highest weight loss and PALF experiences the lowest weight loss. The findings lend to a simple approach for determining the performance of the composites by assessing the type of natural fibres for reinforcing polymeric matrices.  相似文献   

16.
《Field Crops Research》2004,86(1):53-65
Deceleration in rice (Oryza sativa L.) yield over time under fixed management conditions is a concern for countries like Bangladesh, where rice is the primary source of calories for the human population. Field experiments were conducted from 1990 to 1999 on a Chhiata clay loam soil (Hyperthermic Vertic Endoaquept) in Bangladesh, to determine the effect of different doses of chemical fertilizers alone or in combination with cow dung (CD) and rice husk ash (ash) on yield of lowland rice. Two rice crops—dry season rice (December–May) and wet season rice (July–November) were grown in each year. Six treatments—absolute control (T1), one-third of recommended fertilizer doses (T2), two-thirds of recommended fertilizer doses (T3), full doses of recommended fertilizers (T4), T2+5 t CD and 2.5 t ash ha−1 (T5) and T3+5 t CD and 2.5 t ash ha−1 (T6) were compared. The CD and ash were applied on dry season rice only. The 10-year mean grain yield of rice with T1 was 5.33 t ha−1 per year, while the yield with T2 was 6.86 t ha−1 per year. Increased fertilizer doses with T3 increased the grain yield to 8.07 t ha−1 per year, while the application of recommended chemical fertilizer doses (T4) gave 8.87 t ha−1 per year. The application of CD and ash (T5 and T6) increased rice yield by about 1 t ha−1 per year over that obtained with chemical fertilizer alone (T2 and T3, respectively). Over 10 years, the grain yield trend with the control plots was negative, but not significantly, both in the dry and wet seasons. Under T3 through T6, the yield trend was significantly positive in the dry season, but no significant trend was observed in the wet season. The treatments, which showed positive yield trend, also showed positive total P uptake trend. Positive yield trends were attributed to the increasing P supplying power of the soil.  相似文献   

17.
There have been no studies conducted with the objective of investigating the effect of elevated CO2 concentrations ([CO2]) on antioxidants in grains. Therefore, a two-year field experiment was conducted using open-top chambers with two levels of atmospheric CO2 (375 and 550 μmol/mol) to evaluate their effects on rice grain antioxidants. Following exposure to high [CO2], the total phenolic content of all rice milling fractions decreased (3%–18%), with the highest reduction in the brown rice for sinapic acid (167%), and in the white rice for p-hydroxybenzoic acid (100%). The total flavonoid content also decreased under elevated [CO2] in all rice milling fractions (8%–14%), with apigenin (25%) being highly affected in the white rice, and tricin (12%) in the bran. The same trend was found for γ-oryzanol, with decreases of 35%, 32%, 25%, and 2% in the white rice, brown rice, husk, and bran, respectively. In the white and brown rices, tocopherols and tocotrienols were all lower under elevated [CO2], with reductions larger for α-tocotrienol (69%), γ-tocotrienol (46%), and α-tocopherol (38%). Good correlations between antioxidant contents and DPPH radical scavenging capacities indicated that these decreases may be meaningful in the preventive ability of rice against free radical-mediated degenerative diseases.  相似文献   

18.
In this study, waste lignocellulosic sawdust was converted to carboxymethylcellulose (CMC) by the combination process of an inorganic base (NaOH) and a weak acid (monochloroacetic acid, MCA). Optimum conditions for the pretreatment were studied on the basis of lignin and hemicellulose removal. NaOH and MCA concentration, reaction time, and operating temperature were the parameters studied to acquire the optimized conditions for the production of CMC. Degree of substitution (DS) and solubility were greatly influenced by the changes in the experimental conditions. DS increased on increasing the concentration of NaOH and MCA but the effect was more profound during the NaOH loading. A maximum DS of 0.5 was obtained on the treatment with 20 % NaOH and 20 % MCA concentration at 50 °C, 150 rpm for 4 h. 1.28 g CMC/g cellulose was obtained at the optimized set of conditions. Structural information of cellulose and CMC was obtained using IR spectroscopy and the surface morphology was studied using field emission scanning electron microscopy (FESEM). Carboxymethylcellulose showed lower crystallinity than the native cellulose extracted from sawdust which was studied using X-ray diffraction.  相似文献   

19.
Aligned epoxy-matrix composites were made from hemp fibres defibrated with the fungi Phlebia radiata Cel 26 and Ceriporiopsis subvermispora previously used for biopulping of wood. The fibres produced by cultivation of P. radiata Cel 26 were more cellulose rich (78%, w/w) than water-retted hemp due to more degradation of pectin and lignin. The defibrated hemp fibres had higher fibre stiffness (88–94 GPa) than the hemp yarn (60 GPa), which the fibre twisting in hemp yarn might explain. Even though mild processing was applied, the obtained fibre strength (643 MPa) was similar to the strength of traditionally produced hemp yarn (677 MPa). The fibre strength and stiffness properties are derived from composite data using the rule of mixtures model. The fibre tensile strength increased linearly with cellulose content to 850 MPa for pure cellulose. The fibre stiffness increased also versus the cellulose content and cellulose crystallinity and reached a value of 125 GPa for pure crystalline cellulose.  相似文献   

20.
In this work the feasibility of extracting cellulose from cotton, sisal and flax fibers, corn stover and rice husk by means of usual chemical procedures such as acid hydrolysis, chlorination, alkaline extraction, and bleaching was analyzed. Cellulose nanowhiskers from these sources, and from commercial cellulose, were produced by the acid hydrolysis of the obtained celluloses. The final products were characterized by means of Thermogravimetric Analysis (TGA), Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electronic Microscopy (SEM) and Atomic Force Microscopy (AFM). The chemical procedure used to obtain cellulose nanowhiskers was effective in all cases but differences on the thermal stability, chemical composition, crystallinity and morphology were found due to the dissimilar nature of the different sources. Thus, this work demonstrates that the morphology and physical properties of cellulose nanowhiskers synthesized by the same conditions are strongly dependent on their source.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号