共查询到20条相似文献,搜索用时 125 毫秒
1.
基于人工智能的木材缺陷检测研究进展 总被引:1,自引:1,他引:0
木材缺陷检测是木制品加工前的重要步骤,为了提高检测效率和经济效益,木材缺陷检测也从传统的人工方法向智能化方向转变。随着计算机技术的不断提高,人工智能得到快速发展,人工智能在木材缺陷检测中的应用也进一步增加。目前,人工智能主要通过机器学习、人工神经网络、深度学习等算法实现对木材缺陷的预处理和检测。文中阐述部分常用人工智能算法在木材缺陷检测中的应用,包括相关算法的原理、特点;综合分析算法优缺点,并对人工智能技术在木材缺陷检测中的研究进行了展望。 相似文献
2.
木材无损检测技术及其应用与展望 总被引:10,自引:5,他引:10
对木材无损检测的基本原理和主要方法进行了简要论述,介绍了木材无损检测技术在当今木材科学研究和木材加工中的应用,并对无损检测技术在今后木材科学领域的应用前景做了展望。 相似文献
3.
红外热像技术及其在木材无损检测中应用的可行性探讨 总被引:3,自引:1,他引:2
无损检测技术的应用范围越来越广泛,但现有的比较成熟的无损检测技术在实践应用中都有各自的优缺点和局限性。红外热像技术因其具有测量速度快、测量结果直观形象及测量精度高等优点逐渐被人们认识并应用到多个领域。本文介绍红外热像技术的基本原理,对红外热像技术在复合材料内部制造缺陷检测、建筑节能检测、电力设备检测等领域中的研究进展进行分析和总结,在此基础上通过分析木材内部缺陷与红外辐射场强之间的关系,对红外热像技术在木材无损检测中应用的可行性进行探讨。 相似文献
4.
5.
木材无损检测技术是一门新兴的、综合性的木材非破坏性检测技术,可以应用计算机断层扫描技术(Cr)对原木进行无损检测。计算机断层扫描技术是X射线无损检测的一个分支,是对X射线的应用。本论文通过对Cr的利用,通过对Cr图像的提取、分析和处理,找出了一套方便于Cr图像的重建和去除噪声的算法,从而提出利用计算机断层技术(Cr)对木材进行缺陷检测,该方法是可行的。 相似文献
6.
基于分形理论木材表面缺陷识别的研究 总被引:5,自引:0,他引:5
木材表面缺陷检测是多学科交叉的技术,该技术对木材生产领域及其深加工等方面有着较高的应用价值。本文主要围绕分形理论对木材表面缺陷检测进行深入研究,通过将分形理论、小波多分辨率分析以及人工神经网络模式识别技术相结合,研究了木材表面缺陷特征提取、模式识别问题。在对200块试件进行测试时,系统平均识别率达96.5%。结果表明,用分形理论进行特征提取能够高精度地识别木材表面缺陷。 相似文献
7.
概述了微波技术在我国木材干燥、木材改性、胶粘剂合成、材料缺陷检测、竹木产品含水率检测和人造板甲醛释放量检测方面的研究成果及应用现状,微波干燥技术使木材在干燥过程中温度梯度和含水率梯度较小,具有加热时间短、干燥质量好、提高出材率等优点;通过微波改性技术,可以赋予竹木材某些特殊的功能,使低档竹木材高档化,从而有效地利用竹木材料,提高经济价值;借助微波技术进行胶粘剂合成,反应速度比传统的加热方法快数十倍;提出了微波技术在木材干燥、木材改性、无损检测、萃取甲醛释放量检测的发展方向和应用前景. 相似文献
8.
9.
10.
11.
边缘识别法在节子整体视频检测中的验证 总被引:1,自引:0,他引:1
通过对原木节子轮廓的数学描述和对节子边缘点的确定,提出一种比较准确的寻找节子边缘点的视频识别验证方法———边缘检验算子法,对节子的形状进行有效的分析和验证。提出了一种有效的节子数学描述和视频处理方法,为节子的视频检测技术提供了新的理论。 相似文献
12.
新世纪木工机械新理论研究的成果综述 总被引:3,自引:0,他引:3
马岩 《林业机械与木工设备》2004,32(8):4-6
综述了国内外木材加工机械行业的理论发展现状,找出了国内木材加工行业与国际先进水平的差距,提出了木材加工行业未来的发展趋势,总结了木工机械机电一体化技术的新成果和木工机械检测技术的新进展。着重介绍了新西兰林科院在木材视频技术和木材缺陷探测方面的一些研究成果,综述了人造板加工机械和木材加工机械的新理论研究。 相似文献
13.
14.
Image analysis to measure strain in wood and paper 总被引:9,自引:1,他引:9
Summary A fast and accurate strain measurement method was developed to quantify microscopic deformation in wood and paper using video images. Two or more video images, one of which was undeformed and the others of which were deformed, were digitized and compared using the image correlation technique. This digital computer pattern recognition technique permitted the displacement of any point in the image to be measured. Then, strain between any two points in this observation field could be calculated and, hence, normal, shearing strains and Poisson's ratio could be measured directly. Independent strain measurements showed that the method using video images provided accurate strain measurements and could be applied to complex materials like wood and wood products. The strain measurements using the image analysis produced not only normal strains but strain profiles of the normal strains. From the strain profiles, it was possible to detect local areas of strain concentration which might be beyond the elastic range. As it measures displacements and strains from a set of video images using the image correlation technique, the method is non-contact and the observation field can be adjusted easily by changing magnifying power of the optical devices. Thus, the method can be applied to mechanical testing of wood and wood products from the cellular level to full size lumber and will no longer be limited by the fragile nature of the material being tested, industry standards, or equipment restrictions.Authors are grateful to U.S.D.A. for supporting this investigation which is a part of the USDA funded project Initiation and Propagation of Failure in Wood. Authors are also grateful to N. C. Brown Centre for Ultrastructure Studies, CESF, SUNY, Syracuse and Empire State Paper Research Institute, Syracuse for providing research facilities 相似文献
15.
详细阐述利用原木横切面上木材的宏观结构特征和原木树皮及材表特征来识别原木树种的方法.以实例分别不同情况对原木尺寸的检量及其标准尺寸的确定方法进行全面阐述.对相关国家标准在实际运用中需要完善和灵活使用的有关方面提出了建议. 相似文献
16.
As chromated copper arsenate (CCA) contains copper, chromium and arsenic, waste CCA-treated wood must be separated from other treated wood because of environmental pollution by chromium and arsenic when it is incinerated and the regulation. Therefore, a method to identify CCA-treated wood was developed using laser-induced breakdown spectroscopy (LIBS). Using the LIBS apparatus assembled in our laboratory, plasma on a wood surface was generated by a 4?ns pulse of 1064?nm (55?mJ/mm2) emitted from Nd:YAG laser. Fluorescence from the plasma was collected by an ellipsoidal mirror and analyzed by a spectrometer in the range of 190–300?nm. The results showed that the 228.7?nm line from As and 267.6?nm line from Cr were useful for the identification of CCA-treated wood. As the discrimination capacity was confirmed by the elemental composition analysis by X-ray fluorescence, it was concluded that LIBS can specifically identify CCA-treated wood. 相似文献
17.
18.
19.
对GC-MS鉴别木材的影响因素进行综述,分别对该技术的进样方式、进样萃取溶剂、以及木材总离子流图的统计分析方法进行归纳与总结。应用于GC-MS鉴别木种的进样方式包括直接导入进样及间接导入进样,间接导入进样使用的萃取溶剂需要同时满足溶剂的极性强、安全性高、经济性好,并且利于维护设备,GC-MS鉴别木材得出的总离子流图的统计分析方法主要是主成分分析法及相关系数法。GC-MS作为一种先进的分析技术应用于木种鉴别领域,具有灵敏度高、快捷、高效等优势,本研究通过总结分析该技术的影响因素与研究进展状况,对GC-MS应用于木材鉴别具有理论与实践指导意义。 相似文献
20.
IntroductionAtpresent,usingthecomputerimageprocessil1gsys-temtofinishthefeatureextractiol1ofw0oddefectsisi11anexpIorat0rystage.ThismetI1odmaydecreasetI1ellmitati0noftl1eexperilnel1talcol1ditions,suChasIights,instrumentsandsomespccialmateriaIs.Itiscol1venic11ttousethiswayandthegoodresuItswilIbeacI1ieved.TherearethreetypicaIwo0dsurfacedefectst0bestudiedintheexperiment,whicI1arekn0t,boreI1oleal1ddecayofLarixandBeIlIlu.Tl1eworkist0separatetl1edefectsfromthewoodsurfaceimagesandprovideagoodba… 相似文献