首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 640 毫秒
1.
α,ω-di[(4-butoxy-piperazin-1-yl)-phosphinic acid methyl ether]-terminated linear polysiloxane (PNPDMS) was synthesized and utilized as the flame retardant and hydrophobing agent. The flame retardance and thermal decomposition behaviors of cotton fabrics were systematically estimated by limiting oxygen index (LOI), thermogravimetric analysis and vertical burning test, respectively. It was found that the LOI of cotton fabric treated with PNPDMS enhanced to 29.82 % compared with cotton fabric without treatment, whose LOI was only 18.00 %. The treated cotton fabric showed a shorter char length, a shorter After-flame time, and no After-glow time as revealed in vertical burning test. The mechanical property in treated cotton fabric was slightly decrease. Furthermore, the grade of water repellency of treated cotton fabric reached to 90 and water contact angle (WCA) increased to 141.90° compared with cotton fabric without treatment whose WCA was 62.80°. The result showed that the cotton fabric treated with PNPDMS exhibited excellent flame retardance and hydrophobic properties.  相似文献   

2.
α-amylase and pectinase showed good compatibility. A desizing ratio of 95.4 %, a pectin removal rate of 80.4 % and a capillary effect height of 7.1 cm for cotton fabrics treated with α-amylase and pectinase were obtained by a one-bath for bio-desizing and bio-scouring process under the condition of 90 °C for 30 min. After the treatment of the nonionic surfactant Peregal O at 100 °C for 20 min, these important properties for the cotton fabrics were further improved to 98.7 %, 96.8 %, and 18.4 cm separately. The capillary effect height of desized cotton fabrics was improved from 0.2 cm to 6.4 cm by the removal of waxes because its hydrophobic nature of the cotton fabrics. The whole time for this new combining process with high temperature treatment was significantly shortened and it only took about 55 minutes.  相似文献   

3.
A facile and inexpensive way to prepare self-crosslinkable poly(dimethylsiloxane) (PDMS) for superhydrophobic treatment of cotton fabrics is reported in the study. Through thiol-ene click reaction between mercaptopropyltrimethoxysilane (MPTMOS) and vinyl-containing poly(dimethylsiloxane) (VPDMS), PDMS-g-TMOS can be simply and quickly synthesized. The trimethoxysilane group of PDMS-g-TMOS can react with hydroxyl group on cotton fabric and other -Si(OCH3)3 groups. The synthesized polysiloxane (PDMS-g-TMOS) was identified by FT-IR and 1H-NMR. The morphology of the treated cotton fabric was observed by SEM and XPS was used to analyze the elemental composition on the surface of cotton fabric. The analysis results indicated that the surface was fully covered with PDMS. Due to the low surface energy of PDMS and the rough surfaces of cotton fabric, the optimized water contact angle (WCA) and sliding angle were respectively 154°±0.4° and 14°±0.5°, indicating superhydrophobicity. Moreover, water spray test (AATCC Test Method 22-2010) was also applied to evaluate the water repellency of treated cotton fabric and a score of 90 was assigned according to AATCC Test Method 22-2010. The durability of treated cotton fabric was tested by 50 laundering cycles. The resultant WCA barely decreased and the score of water spray test dropped from 90 to 80, showing the reasonable wash durability.  相似文献   

4.
5,5-Dimethyl-3-((3’-triethoxysilylpropylamido)propyl)hydantoin (Si-Hy), a novel N-halamine precursor, has been synthesized in this work. The traditional pad-dry-cure process was used to coat the produced Si-Hy onto cotton fabrics. The coated fabric was characterized by SEM, FTIR and XPS. After exposure to chlorine bleach, the treated fabric presented good antimicrobial ability. The chlorinated sample demonstrated potent antibacterial ability against S. aureus (ATCC 6538) and E. coli O157:H7 (ATCC 43895) in brief contact time. Sixty seven percent of oxidative chlorine was retained and over 85 % of chlorine could be recharged after storage for 15 days and rechlorination. The antibacterial materials with good biocidal efficacies have potential applications in the healthcare industry.  相似文献   

5.
The paper discusses a method to functionalize cotton fabrics using biologically active natural compounds to achieve the antibacterial characteristics required for medical application. The biologically active natural compounds include propolis, beeswax, and chitosan. Three 100 % cotton knitted fabrics with different degrees of compactness were impregnated in the emulsions containing the active ingredients and fabric variant G3 with the highest degree of impregnation was considered for the evaluation of the antibacterial properties and comfort characteristics. The results show that the treated cotton fabric had high antibacterial activity against both gram positive bacteria Staphylococcus aureus and Streptococcus β haemolytic, and gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The presence of the biologically active natural compounds on the cotton substrates modified the surface of the textile fibers as seen in the SEM images. The treatment also improved fabric comfort properties, the cotton substrates became less air permissive and more hygroscopic after the treatment. The experimental results indicated that propolis, beeswax and chitosan can be applied as an emulsion to functionalize cotton textile materials. The antibacterial performance of the functionalized fabrics suggested that the cotton fabrics treated with those biologically active natural compounds have the potentials to be used in medical fields.  相似文献   

6.
The stearyl methacrylate modified polysiloxane/nanocomposite was synthesized by graft copolymerization between stearyl methacrylate modified polysiloxane with pendent epoxy groups and amino-functionalized nano silica. Then it was utilized to fabricate the superhydrophobic cotton fabric by one-step method. The structures, chemical compositions, thermal properties, surface morphology and wettability were characterized by Fourier Transform Infrared Spectrum (FT-IR), X-ray photoelectron spectroscopy (XPS), Thermo-gravimetric analyzer (TGA), Scanning electron microscopy (SEM) and Static contact angle analyzer. Results showed that a hydrophobic polysiloxane film and many nano-scaled tubercles were coated on the surface of the treated cotton fabrics plus their inherent microscaled roughness, which were the reasons why cotton fabric changed from hydrophilicity to hydrophobicity. In addition, with increase of the amount of nanocomposite, hydrophobicity of the treated cotton fabric would be enhanced; water contact angle of this fabric could attain 157°, which was higher than 141.5° reached by the fabric treated with stearyl methacrylate modified polysiloxane. The superhydrophobic cotton fabric also possessed favorable washing durability. On the other hand, its air permeability, color and softness would not be influenced instead.  相似文献   

7.
A novel dodecylphenylsiloxane oligomer resin/nanocomposite (PHDESR-SiO2) was prepared by graft copolymerization between dodecyl modified phenylsiloxane resin with pendent epoxy groups (PHDESR) and amino-functionalized silica nanoparticles (BTEPA-SiO2). PHDESR-SiO2 was then used to prepare a super hydrophobic surface on cotton fabric by a facile solution-immersion process method. Chemical structures, chemical compositions, wettability, surface morphology, and thermal properties were investigated by Fourier Transform Infrared Spectrum (FT-IR), 1H-NMR spectrum, X-ray photoelectron spectroscopy (XPS), static contact angle analyzer, scanning electron microscopy (SEM), Particle size distribution (PSD) and thermo-gravimetric analysis (TGA). The results showed that the target product PHDESR-SiO2 has an anticipative structure with many micro/nanostructure tubercles, a cross-linked network hydrophobic organosilicon resin film and many clusters of cylindrical dodecyl molecular brushes. This created super hydrophobic structure on the surface of the treated cotton fabrics. XPS analysis indicated that the long carbon chain groups had a slight tendency to enrich the film-air interface. In addition, PHDESR-SiO2 can provide good hydrophobicity for the treated fabric. As the dose of PHDESR-SiO2 increased, the hydrophobicity of the treated fabric enhanced and consequently the water static contact angle reached 152.5 °. This had little influence on the softness, color, and gas permeability of the fabrics. This makes it slightly stiff at high doses, and the super-hydrophobic cotton fabric also had good launderability.  相似文献   

8.
Oxygen plasma pre-treatment was applied to cotton fabric with the aim of improving the water repellency performance of an inorganic-organic hybrid sol-gel perfluoroalkyl-functionalized polysilsesquioxane coating. Cotton fabric was pre-treated with low-pressure oxygen plasma for different treatment times and operating powers. Afterward, 1H,1H,2H,2H-perfluorooctyltriethoxysilane (SiF) was applied to the cotton fabric samples using the pad-dry-cure method. The surfaces of the untreated and modified cotton fibers were characterised using Fourier transform infrared spectroscopy, Xray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy. The water repellency of the SiF-coated fabric samples was evaluated using static and sliding contact angle measurements with water. The results show that the plasma treatment with the shortest treatment time (10 s) and the lowest operating current (0.3 A) increased the atomic oxygen/carbon ratio of the cotton fiber surface from 0.6 to 0.8 and induced the formation of a nano-sized grainy surface. Increasing the plasma treatment time and/or operating current did not intensify the surface changes of the cotton fibers. Such saturation effects were explained by the large influence of reactive oxygen atoms during the plasma treatment. The measured static water contact angles on the surface of the untreated and plasma pre-treated and SiF-coated cotton fabrics showed that the oxygen plasma pre-treatment enabled the increase of the water contact angle from 135° to ≈150°, regardless of the applied plasma treatment time and discharge power. This improvement in the hydrophobicity of the SiF coating was followed by a decrease in the sliding angle of water droplets by more than 10° compared to the plasma untreated and SiF-coated sample characterized by a water sliding angle of 45°. Additionally, measurements of the water sliding angle revealed that the increase of the static contact angle from 149° to 150° corresponded to a drop of the water sliding angle from 33 to 24°, which suggests that the plasma pre-treatment of 20 s at an operating current of 0.3 A produced the best water-repellent performance of the SiF-coated cotton fabric.  相似文献   

9.
Herein we report a simple and reproducible method for fabricating highly durable and robust superhydrophobic and superoleophilic cotton fabrics via simultaneous radiation-induced graft polymerization of glycidyl methacrylate and subsequent chemical modifications with aminopropyltriethoxysilane and hexamethyldisilazane. The chemical structure and the surface topography of the pristine and the modified cotton fabrics were investigated in detail by ATR-FTIR, XPS, and 29Si NMR, and a grafting layer was successfully immobilized onto the surface of the cotton fabric by forming covalent bonds. Multi-dimensional surface roughness was created by combining micro-sized fibers of the cotton fabric, nanoscaled protuberances of the grafting chain, and molecular level spherical projection points of silicon methyl. The superhydrophobic cotton fabric exhibited long-term stability, ultra-high durability and robustness, and maintained its properties even after 25 wash cycles. The fabric also showed excellent water repellency with a water contact angle of 153 ° and a high efficiency of oil/water separation (98 %). The superhydrophobic/superoleophilic cotton fabric developed in the present work exhibits important potential applications in superhydrophobic textiles and oil/water separation.  相似文献   

10.
Cotton fabrics exhibiting superhydrophobic and antibacterial properties were prepared through a non-solvent induced phase separation method using hydrophobic poly(vinylidene fluoride) (PVDF) and its hybrids with photocatalytic zinc oxide nanoparticles (nano-ZnO) as surface modifying agents for cotton fabric. The effects of coagulating medium and temperature on microstructural morphology and surface hydrophobictity of the cotton fabrics were investigated by FE-SEM observation and contact angle measurement. Superhydrophobic cotton fabrics exhibiting water contact angle higher than 150 ° could be obtained by coating the fabrics with solutions of PVDF and nano-ZnO followed by coagulation in ethanol as non-solvent. This phenomenon is considered to be originated from both chemically hydrophobic PVDF layer and physical micro- and nano-bumps formed on the surface of cotton fabric, which are essential requirements for Lotus effect. Moreover, antibacterial properties could be synergistically obtained by utilizing photocatalytic effect of nano-ZnO.  相似文献   

11.
In this study, we synthesized a novel N-halamine precursor, sulfuric acid mono-[2-(4-[4-chloro-6-(2-[4,4- dimethyl-2,5-dioxo-imidazolidin-1-yl]-ethylamino)-[1,3,5]triazin-2-ylamino]-benzenesulfonyl)-ethyl] ester sodium (TB), which contains two reactive groups of monochloro triazine reactive groups and bis-sulphatoethylsolphone reactive groups. The structure of TB is similar to iso-bifunctional group reactive dyes and could be coated on cotton fabrics by covalent bonds through a reactive dyeing process. The cotton coated with TB was characterized by FTIR and SEM. After chlorination, the treated cotton fabrics showed excellent antibacterial efficacy and inactivated all inoculated S. aureus (ATCC 6538) and E. coli O157: H7 (ATCC 43895) within 1 min of contact. Over 85 % of tensile strength retained both in warp and weft directions after treatment and chlorination. Almost 80 % of active chlorine can be regained by treating with household bleach after extensive washing and long time storage.  相似文献   

12.
A quaternary ammonium compound, 2-hydroxypropyltrimethylammonium chloride amino-terminated hyper-branched polymer (HBP-HTC), was synthesized from an amino-terminated hyperbranched polymer (HBP-NH2) and 2,3-epoxypropyltrimethylammonium chloride (EPTAC) as a grafting agent in aqueous solution. Its molecular weight and possible structure were characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (1H-NMR). The cotton fabric was treated with 2 g/l HBP-HTC aqueous solution for 30 min at room temperature to provide the cotton fabric with antimicrobial properties. The antimicrobial activities of the HBP-HTC aqueous solutions and the HBP-HTC treated cotton fabrics were evaluated quantitatively. The results indicated that the HBP-HTC treated cotton fabric showed 99.92 % reduction of bacteria S. aureus and 99.66 % reduction of bacteria E. coli, respectively. The antimicrobial activities of the HBP-HTC treated cotton fabrics were maintained at over 99.00 % reduction level even after being exposed to 20 consecutive home laundering conditions.  相似文献   

13.
The efficacy of antimicrobial treatment of cotton fabrics depends on various parameters of the coating process, such as the chemical nature and concentration of the antimicrobial agent, the composition of the crosslinking formulation, and the curing temperature. The inclusion complex of triclosan with β-cyclodextrin (βCD) was synthesized and characterized by FTIR, XRD, NMR, Raman, SEM, and TGA. The minimum inhibitory concentration and minimum bactericidal concentration of the complex against Klebsiella pneumoniae and Staphylococcus aureus were compared to those of its precursor. A multifactorial study included an evaluation of the effects of triclosan complexation with β-cyclodextrin, a comparison between the glyoxal and tetracarboxylic acid as crosslinkers, an investigation of the effect of crosslinker and catalyst concentrations, and a comparison of curing at 120°C and 180°C. The cotton was characterized by FTIR-ATR, the micrographs of treated samples were obtained by SEM and the weight add-on was calculated. The bactericidal properties were determined according to AATCC-147. The correlation between the coating process parameters and the antimicrobial efficacy was determined. The optimal combination leading to the highest weight add-on and the antimicrobial coating that was most durable to multiple detergent washes at an elevated temperature was the use of complexed triclosan grafted onto the cotton in the presence of tetracarboxylic acid, followed by curing at 180°C. The curing temperatures were 120°C (P=0.002) and 180°C (P=0.008), catalysts were 1 % and 2 % aluminium sulfate and sodium hypophosphite (P<0.001), and the crosslinkers were 5 % and 10 % glyoxal and butanetetracarboxylic acid (P<0.001); these parameters significantly enhanced the antimicrobial properties of the treated fabrics. The study showed that βCD did not have antimicrobial activity, while the βCD/triclosan-treated textile exhibited potential antimicrobial properties. Overall, the bactericidal activity of fabrics can be enhanced by using βCD/triclosan with 10 % butanetetracarboxylic acid as a cross-linker and 5 % sodium hypophosphite as a catalyst at a curing temperature of 180°C.  相似文献   

14.
The cotton fabric was modified with dopamine methacrylamide (DMA) based on mussel-inspired reaction and polymerized with zwitterionic sulfobetaine methacrylate (SBMA) through free radical polymerization reaction. The poly(DMA-SBMA) contained not only key chemical constituents of dopamine hydrochloride, which strongly adsorbed to fabric substrates, but also hydrophilic groups, providing a hydrophilic surface for fabric due to its strong interaction with water via electrostatic interactions. The chemical structure, surface topography, and surface wettability of the fabric were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and contact angle experiments, respectively. The results showed that the water contact angle (WCA) of the treated fabric was ~0 °, whereas the underwater oil contact angle (OCA) was ~161 °, as compared to ~25 ° for the control one. It is expected that as-prepared fabrics could be applied in oil/water separation due to such special superhydrophilicity and superoleophobicity.  相似文献   

15.
Natural dye extracts were obtained by extraction from Punica granatum L. using water as an extractant at 90 °C for 90 min with various liquor ratios (solid Punica granatum L.(wt.): solvent water(wt.); 1:100–1:5). Dyeing was carried out using a 1:50 dyeing bath ratio at 80 °C for 60 min by exhaustion method. This study focused on the effect of liquor ratio on dyeing properties and deodorizing/antibacterial performance of various fabrics (cotton, silk and wool) dyed with Punica granatum L. extract without mordants. The optimum liquor ratio was found to be 1:10. By IR, UV-visible spectroscopies and HPLC analysis, the main component in Punica granatum L. extract and the yellow colorant component were found to be ellagic acid. By GC/MS analysis, the major volatile components of pristine Punica granatum L. powder were found to be acetic acid (area: 25.84 %), ethanol (area: 17.97 %), acetoin (area: 13.11 %), acetaldehyde (area: 8.96 %), isobutanal (area: 4.90 %). All dyed fabrics (cotton, silk and wool fabrics) displayed outstanding deodorizing performance (99 %) against ammonia gas and excellent antibacterial performance (bacteriostatic reduction rate: 99.9 %) against Staphylococcu aureus and Klebsiella pneumoniae.  相似文献   

16.
This study evaluated the potential application of an atmospheric plasma (AP) treatment as a pre-treatment for digital textile printing (DTP) of polyester (PET) fabrics and cotton, in order to determine its viability as an alternative to the usual chemical treatment. The surface properties of the AP-treated fabrics were examined through scanning electron microscopy (SEM) and contact angle, and the physical properties, such as electrostatic voltage and water absorbance, were tested. The properties of cotton and PET with the AP treatment were found to be dependent on number of repetitions and electric voltage. Although no remarkable surface differences were observed by SEM in the fabrics before and after treatment, the static contact angle of the PET after AP treatment was decreased from 85 ° to 24 ° at wave. In addition, the charge decay time decreased as the voltage and number of treatments increased. The absorption height of PET changed after exposure to 7 mm with increasing measurement time. The K/S with and without the AP pre-treated and DTP finished cotton was better than that with the usual chemical modification. In PET, the 0.5 kW and 1 time AP-treated specimen showed the highest K/S values.  相似文献   

17.
In this study, chitosan and pentasodium tripolyphosphate (TPP)-based bilayers were fabricated on the cationized woven cotton fabrics via layer-by-layer (LBL) self-assembly technique. The initial cationic charges on cotton fabric were produced through the aminization procedure involving the covalent attachment of reactive dye to cotton fabric and subsequent reductive cleavage of the dye to free amine. Different numbers of bilayers (1, 5, and 10) consisting of chitosan/TPP have been deposited on the fabrics. The surface morphology, cationic group content, chemical surface modification, whiteness index, surface tension and antibacterial properties of the modified cotton samples were investigated using scanning electron microscopy (SEM), methylene blue test, FTIR, reflectance spectroscopy, water contact angle measurements and antibacterial test, respectively. The bacterial inhibition experiments demonstrated that the modified cotton fabric with the addition of chitosan/TPP bilayers can increase the degree of inhibition on E. coli and S. aureus bacteria. The utilized LBL method was an easy and cost-effective procedure for developing of novel antibacterial textiles with the highly attractive feature in the medical and hygienic products.  相似文献   

18.
In the presence of Pt catalyst, α,ω-hydrogenpolysiloxane reacted with allyl glycidyl ether, and an intermediate α,ω-diepoxysiloxane was formed. The epoxy cyclic-opening reaction was conducted between the intermediate and polyetheramine in isopropanol solution, the silicone polyetheramine block copolymer (BPEAS) was thus made. The chemical structures of BPEAS were characterized using IR and 1H-NMR separately. Then cotton fabric was treated with BPEAS for application purpose. The finishing effects were tested in terms of film morphology, hydrophilic ability, softness and mechanical properties. The recorded results showed that BPEAS can be used directly to treat cotton fabrics without adding any emulsifier at the viscosity of 6700 mPa·s and amino value of 0.6009 mmol/g. Bending rigidity and hysteresis of the treated fabric decreased by 53.53 % and 67.39 %, the drape coefficient dropped by 15 %, whereas the wrinkle recovery angle increased by 57.14 %. The treated cotton fabric is hydrophilic, and has a bulky soft hand, better anti-wrinkle property compared to the untreated one.  相似文献   

19.
An epoxy group-terminated polyvinylmethylsiloxane (EPVMS) was firstly prepared via the cohydrolysis/condensation reaction of octamethylcyclotetrasiloxane (D4), 2,4,6,8-Tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (D4V), and epoxy group-terminated polydimethylsiloxane (ETP) under a base catalyst. Then, the EPVMS was reacted with polymethylhydrosiloxane oligomer (PHMS) by hydrosilylation to develop novel crosslinked polysiloxane with end-capped epoxy groups (CLPS). The chemical structure and the thermal property of the as-prepared products were characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectra (1H/13C NMR) and thermogravimetric analysis (TGA). Finally, the CLPS was applied as the finishing agent to treat the cotton fabrics. The film morphology and the surface properties were examined with scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), contact angle measurements, and other instruments. FT-IR and NMR results confirmed the structure of the resultants. The crosslinked polysiloxane CLPS showed better thermal stability than the uncrosslinked polysiloxane EPVMS. The CLPS film on cotton fabric surface seemed to be smooth compared to the control by SEM. However, owing to the crosslinked structure, the CLPS film on silicon-wafer was inhomogeneous and had a few weak or strong peaks. At 5 nm data scale and in 2×2 μm2 scanning field, the root mean square roughness of CLPS film reached to 0.414 nm. XPS analysis further demonstrates that there was a CLPS film covered on the cotton surface. Hydrophobicity of the CLPS treated fabric was superior to that of the EPVMS treated one. Whiteness of the treated fabrics by CLPS and EPVMS did not change at all compared to the control. The softness of the two treated fabrics was both better than that of control and particularly the softness of the EPVMS treated fabrics was preferable. The CLPS treated fabric possessed good washing durability.  相似文献   

20.
The surface morphology of the CO2 laser treated grey cotton fabrics was studied which showed a characteristics sponge-like structure on cotton fibres after treating with CO2 laser irradiation. The laser treatment parameters ranging from 100 to 150 pixel time and 40 to 70 dot per inch (dpi) were irradiated on the grey cotton fabrics directly and the degree of physical modifications, such as surface morphology, wettability and fabric strength, were changed accordingly with various laser treatment parameters. The surface morphology, wettability and tensile strength of cotton fibre treating with laser were evaluated using different instruments, such as Scanning Electron Microscope (SEM), contact angle meter and tensile strength machine. In spite of creating a sponge-like structure on fibre surface after treating with laser, the wettability of the samples was highly improved but the tensile strength was decreased.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号