首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A process was developed to separate fiber from distillers dried grains with solubles (DDGS) in a dry‐grind corn process. Separation of fiber from DDGS would provide two valuable coproducts: 1) DDGS with reduced fiber, increased fat, and increased protein contents; and 2) fiber. The process, called elusieve process, used two separation methods, sieving and elutriation, to separate the fiber. Material carried by air to the top of the elutriation column was called the lighter fraction and material that settled to the bottom of the column was called the heavier fraction. We evaluated the compositions of fractions produced from sieving and elutriation. Two commercial samples of DDGS were obtained from two dry‐grind corn plants. Sieving over four screens (869, 582, 447, and 234 μm openings) created five size categories. The two smallest size categories contained >40% (w/w) of the original DDGS and had reduced fiber and increased protein and fat contents relative to the original DDGS. Elutriation of the remaining three size categories increased protein and fat contents and reduced fiber contents in the heavier fractions. Elutriation at air velocities of 1.59–5.24 m/sec increased the protein content of the heavier fraction by 13–41% and increased the fat content of the heavier fraction by 4–127% compared with the bulk fractions of each size category. This process was effective in separating fiber from both DDGS samples evaluated. Elusieve process does not require changes in the existing dry‐grind process and can be implemented at the end of the dry‐grind process.  相似文献   

2.
In the dry-grind process, corn starch is converted into sugars that are fermented into ethanol. The remaining corn components (protein, fiber, fat, and ash) form a coproduct, distillers dried grains with solubles (DDGS). In a previous study, the combination of sieving and elutriation (air classification), known as the elusieve process, was effective in separating fiber from DDGS. In this study, elusieve fiber was evaluated for ethanol production and results were compared with those reported in other studies for fiber from different corn processing techniques. Fiber samples were pretreated using acid hydrolysis followed by enzymatic treatment. The hydrolyzate was fermented using Escherichia coli FBR5 strain. Efficiency of ethanol production from elusieve fiber was 89–91%, similar to that for pericarp fiber from wet-milling and quick fiber processes (86–90%). Ethanol yields from elusieve fiber were 0.23–0.25 L/kg (0.027–0.030 gal/lb); similar to ethanol yields from wet-milling pericarp fiber and quick fiber. Fermentations were completed within 50 hr. Elusieve fiber conversion could result in 1.2–2.7% increase in ethanol production from dry-grind plants. It could be economically feasible to use elusieve fiber along with other feedstock in a plant producing ethanol from cellulosic feedstocks. Due to the small scale of operation and the stage of technology development for cellulosic conversion to ethanol, implementation of elusieve fiber conversion to ethanol within a dry-grind plant may not be currently economically feasible.  相似文献   

3.
In the dry‐grind process, starch in ground corn (flour) is converted to ethanol, and the remaining corn components (protein, fat, fiber, and ash) form a coproduct called distillers dried grains with solubles (DDGS). Fiber separation from corn flour would produce fiber as an additional coproduct that could be used as combustion fuel, cattle feed, and as feedstock for producing valuable products such as “cellulosic” ethanol, corn fiber gum, oligosaccharides, phytosterols, and polyols. Fiber is not fermented in the dry‐grind corn process. Its separation before fermentation would increase ethanol productivity in the fermenter. Recently, we showed that the elusieve process, a combination of sieving and elutriation (air flow), was effective in fiber separation from DDGS. In this study, we evaluated the elusieve process for separating pericarp fiber from corn flour. Corn flour remaining after fiber separation was termed “enhanced corn flour”. Of the total weight of corn flour, 3.8% was obtained as fiber and 96.2% was obtained as enhanced corn flour. Neutral detergent fiber (NDF) of corn flour, fiber, and enhanced corn flour (dry basis) were 9.0, 61.5, and 5.7%, respectively. Starch content of corn flour, fiber, and enhanced corn flour (dry basis) were 68.8, 23.5, and 71.3%, respectively. Final ethanol concentration from enhanced corn flour (14.12% v/v) was marginally higher than corn flour (13.72% v/v). No difference in ethanol yields from corn flour and enhanced corn flour was observed. The combination of sieving and air classification can be used to separate pericarp fiber from corn flour. The economics of fiber separation from corn flour using the elusieve process would be governed by the production of valuable products from fiber and the revenues generated from the valuable products.  相似文献   

4.
Recently, the Elusieve process, a combination of elutriation (air classification) and sieving (screening) was developed to separate fiber from distillers dried grains with solubles (DDGS) to increase DDGS utilization in nonruminant (poultry and swine) diets. Elusieve process produces three products: 1) Pan DDGS, with 5% higher protein content than conventional DDGS, which would be used at higher inclusion levels in broiler diets because of low fiber content; 2) Big DDGS, with nearly the same protein content as conventional DDGS, which would be used at same inclusion levels as conventional DDGS; and 3) Fiber product. The objective of this study was to determine and compare pellet‐mill throughput, power consumption, and pellet quality for broiler diets incorporating different levels (0, 10, and 20%) of conventional DDGS and DDGS products from Elusieve process. Poultry oil contents were lower (1.5–1.6%) in diets comprising Pan DDGS and diets without DDGS than in the other diets (2.2–3.1%). The feed throughput was not affected by inclusion levels or type of DDGS. Pellet quality (pellet durability index [PDI]) for diets comprising Pan DDGS (both 10 and 20% inclusion levels) was significantly better than PDI for diets comprising conventional DDGS, Big DDGS, and the diet without DDGS. Better pellet quality of diets comprising Pan DDGS could be due to lower quantity of poultry oil used as well as compositional characteristics such as low fiber and high protein. Diets with Big DDGS had similar pelleting characteristics to those with conventional DDGS. Pellet quality deteriorated at higher inclusion levels of conventional DDGS, Big DDGS, and Enhanced DDGS. Considering that Pan DDGS would be included at higher inclusion levels in broiler diets, superior pellet quality of diets comprising Pan DDGS is beneficial.  相似文献   

5.
One of the fastest growing industries in the United States is the fuel ethanol industry. In terms of ethanol production capability, the industry has grown by more than 600% since the year 2000. The major coproducts from corn‐based ethanol include distillers dried grains with solubles (DDGS) and carbon dioxide. DDGS is used as a livestock feed because it contains high quantities of protein, fiber, amino acids, and other nutrients. The goal of this study was to quantify various chemical and physical properties of DDGS, distillers wet grains (DWG), and distillers dried grain (DDG) from several plants in South Dakota. Chemical properties of the DDGS included crude ash (5.0–21.93%), neutral detergent fiber (NDF) (26.32–43.50%), acid detergent fiber (ADF) (10.82–20.05%), crude fiber (CF) (8.14–12.82%), crude protein (27.4–31.7%), crude fat (7.4–11.6%), and total starch (9.19–14.04%). Physical properties of the DDGS included moisture content (3.54–8.21%), Aw (0.42–0.53), bulk density (467.7–509.38 kg/m3), thermal conductivity (0.05–0.07 W/m·°C), thermal diffusivity (0.1–0.17 mm2/sec), color L* (36.56–50.17), a* (5.2–10.79), b* (12.53–23.36), and angle of repose (25.7–47.04°). These properties were also determined for DWG and DDG. We also conducted image analysis and size determination of the DDGS particles. Carbon group characterization in the DDGS and DDG samples were determined using NMR spectroscopy; O‐alkyl comprised >50% of all DDGS samples. Results from this study showed several possibilities for using DDGS in applications other than animal feed. Possibilities include harvesting residual sugars, producing additional ethanol, producing value‐added compounds, using as food‐grade additives, or even using as inert fillers for biocomposites.  相似文献   

6.
Three different modified dry‐grind corn processes, quick germ (QG), quick germ and quick fiber (QGQF), and enzymatic milling (E‐Mill) were compared with the conventional dry‐grind corn process for fermentation characteristics and distillers dried grains with solubles (DDGS) composition. Significant effects were observed on fermentation characteristics and DDGS composition with these modified dry‐grind processes. The QG, QGQF, and E‐Mill processes increased ethanol concentration by 8–27% relative to the conventional dry‐grind process. These process modifications reduced the fiber content of DDGS from 11 to 2% and increased the protein content of DDGS from 28 to 58%.  相似文献   

7.
With the U.S. fuel ethanol industry projected to grow during the next several years, supplies of distillers dried grains with solubles (DDGS) are anticipated to continue to grow as well. DDGS is used primarily as livestock feed. Much of the DDGS must be shipped, often over large distances, outside the Corn Belt (which is where most of the corn‐based ethanol plants are currently located). Stickiness and caking among particles is a common issue for DDGS, and it often leads to flowability problems. To address this, the objective of this study was to understand the cross‐sectional and surface natures of DDGS particles from five ethanol plants, and how they interact with DDGS properties. This study examined the distribution patterns of chemical components within cross‐sections, within section edges (i.e., surface layers), and on surfaces using standard staining techniques; chemical composition was determined using standard protocols; and physical and flowability properties were also determined. Crude protein in the samples was 28.33–30.65% db, crude fat was 9.40–10.98% db, and neutral detergent fiber (NDF) was 31.84–39.90% db. Moisture contents were 4.61–8.08% db, and geometric mean diameters were 0.37–0.52 mm. Cross‐sectional staining showed protein levels of 19.57–40.39%, and carbohydrate levels of 22.17–43.06%, depending on the particle size examined and the production plant from which the DDGS was sampled. Staining of DDGS particles indicated a higher amount of surface layer protein compared with carbohydrate thickness in DDGS particles that had a lower flow function index (which indicated potential flow issues). Additionally, surface fat staining suggested that higher surface fat also occurred in samples with worse flow problems. This study represents another step toward understanding why DDGS particles stick together during storage and transport, and will hopefully help to improve DDGS material handling strategies.  相似文献   

8.
Effects of phytase addition, germ, and pericarp fiber recovery were evaluated for the E‐Mill dry grind corn process. In the E‐Mill process, corn was soaked in water followed by incubation with starch hydrolyzing enzymes. For each phytase treatment, an additional phytase incubation step was performed before incubation with starch hydrolyzing enzymes. Germ and pericarp fiber were recovered after incubation with starch hydrolyzing enzymes. Preliminary studies on phytase addition resulted in germ with higher oil (40.9%), protein (20.0%), and lower residual starch (12.2%) contents compared to oil (39.1%), protein (19.2%), and starch (18.1%) in germ from the E‐Mill process without phytase addition. Phytase treatment resulted in lower residual starch contents in pericarp fiber (19.9%) compared to pericarp fiber without phytase addition (27.4%). Results obtained led to further investigation of effects of phytase on final ethanol concentrations, germ, pericarp fiber, and DDGS recovery. Final ethanol concentrations were higher in E‐Mill processing with phytase addition (17.4% v/v) than without addition of phytase (16.6% v/v). Incubation with phytases resulted in germ with 4.3% higher oil and 2.5% lower residual starch content compared to control process. Phytase treatment also resulted in lower residual starch and higher protein contents (6.58 and 36.5%, respectively) in DDGS compared to DDGS without phytase incubations (8.14 and 34.2%, respectively). Phytase incubation in E‐Mill processing may assist in increasing coproduct values as well as lead to increased ethanol concentrations.  相似文献   

9.
Widespread epidemics of Stenocarpella ear rot (formerly Diplodia ear rot) have occurred throughout the central U.S. Corn Belt in recent years, but the influence of S. maydis infected grain on corn ethanol production is unknown. In this study, S. maydis infected ears of variety Heritage 4646 were hand‐harvested in 2010 from a production field in central Illinois and segregated into one of five levels of ear rot severity based upon visual symptoms. The concentration of ergosterol, a sterol produced by fungi but not plants, was observed to increase with the severity of ear rot (127–306.5 μg/g), and none was detected in the control corn. Corn test weight declined with progression of the disease and was 42.6% lower for the most severely rotted grain from ears infected early in their development. Accompanying changes in composition were also apparent. Crude fat and oil contents decreased (from 4.7 to 1.5%) and fiber increased (from 6.6 to 9.6%), but starch content remained largely invariant. Oil composition also varied among the infected samples. Control and infected corn samples were subjected to ethanol fermentation with a laboratory‐scale corn dry‐grind ethanol process. Ethanol yields for control and infected samples were similar on an equivalent weight basis (2.77–2.85 gal/bu). In comparison with the control, S. maydis infection altered the distillers dried grains with solubles (DDGS) properties, wherein the crude protein was significantly higher and oil significantly reduced, and ash, fiber, and yield per ton were not significantly different. Based upon these results, we conclude that Stenocarpella ear rot has the potential to affect DDGS composition but not ethanol yield on an equivalent weight basis.  相似文献   

10.
A twin‐screw extrusion study was performed in replicated trials to produce vegetable‐based feeds for juvenile yellow perch. Two isocaloric (3.06 kcal/g) experimental diets were balanced to contain 20 and 40% distillers dried grains with solubles (DDGS) and a constant amount (20%) of fermented high‐protein soybean meal (PepSoyGen) as the fishmeal protein replacers; crude protein content was targeted at 40%. A fishmeal‐based diet was used as a control. Extrusion conditions included conditioner steam (0.11–0.16 kg/min), extruder water (0.11–0.19 kg/min), and screw speed (230–300 rpm). Increasing DDGS from 0 to 40% led to a considerable rise in bulk density, lightness L*), yellowness (b*), and unit density but to decreases in water activity (aw) and expansion ratio by 12.6, 14.4, 23, 21, 31, and 13%, respectively. The lowest unit density of 791.6 kg/m3 and highest bulk density of 654.5 kg/m3 were achieved with diets containing 20 and 40% DDGS, respectively; changes in DDGS content did not affect extrudate moisture, absorption index, or thermal properties. Raising DDGS from 0 to 40% resulted in an increase in water solubility and redness (a*) by 13.4 and 35%, respectively. All extrudates had high durability (>98%), and low aw of less than 0.5. Overall, this study yielded viable feeds for yellow perch.  相似文献   

11.
《Cereal Chemistry》2017,94(6):934-941
Distillers dried grains with solubles (DDGS) are widely used as feed for cattle, dairy, and swine because of their protein, fiber, amino acids, fat, and other vital nutrients. Corn ethanol plants in the United States recently have started extracting oil from DDGS to gain additional profit, thus producing low‐oil DDGS. So far, there has been no comprehensive study reported with bulk handling and flowability properties of low‐oil DDGS. We measured the air resistance, moisture diffusivity, and air permeability properties for low‐oil DDGS at different temperature and relative humidity conditions, along with some important physical and chemical properties. Physical property comparisons between regular and low‐oil DDGS showed differences in key properties such as particle size, color, density, porosity, and angle of repose. The modified Henderson model predicted the equilibrium moisture content (EMC)–equilibrium relative humidity (ERH) relationship of low‐oil DDGS with a low standard error of regression value (0.008); it showed no pattern in the residuals and was judged the most appropriate model tested for EMC‐ERH predictions. Results of EMC‐ERH nonlinear modeling were used to define conditions for moisture diffusivity. Moisture diffusivities of low‐oil DDGS at varying drying temperatures ranged from 0.74 × 10−11 to 1.77 ×10−11m2/s. The properties are important for understanding and modeling heat and moisture transport through and flow properties of low‐oil DDGS.  相似文献   

12.
ABSTRACT

This study was conducted to determine, by investment analysis, the profitability and feasibility of fruit farms in the Middle Black Sea region of Turkey. The criteria of Net Present Value (NPV), Cost-Benefit Ratio (CBR), and Internal Rate of Return (IRR) were used for investment analysis. Three different discount rates (10%, 8%, and 5%) were used to get the NPV and CBR for peach and cherry. The NPVs for peach were found to be positive (573.0 $/da, 793.47 $/da, and 1248.6 $/da) [1 da (dekar) = 1,000 square meters of land]. The NPVs for cherry were also found to be positive (3467.6 $/da, 4323.4 $/da, and 6143.3 $/da). In addition, the CBRs for peach were greater than 1 (1.18, 1.21, and 1.27) and the CBRs for cherry were greater than 1 (1.81, 1.87, and 1.94). The IRR was 19.81% for peach and 45.31% for cherry. From the results of the study, it can be concluded that investment in fruit farming is economically feasible and that fruit farming-especially cherry-can be one of the most important income sources for farmers in the Middle Black Sea research region in Turkey.  相似文献   

13.
The objective of this study was to establish methods for determining the content and components of residual starch in distiller's dried grains with solubles (DDGS), a coproduct from dry‐grind corn ethanol production. Four DDGS prepared in our laboratory and one DDGS obtained from a commercial ethanol manufacturer were used for the study. Quantitative analysis of total residual sugar (TRS) in DDGS was performed by determining d ‐glucose produced by enzymatic hydrolysis of oligosaccharides and residual starch remaining in hexane‐defatted DDGS after being dispersed in 90% DMSO. The TRS consisted of free glucose, oligosaccharides, and residual starch. The commercial manufacturer's DDGS contained more TRS (15.8%, w/w db) than the laboratory‐processed DDGS (2.4–2.9%, w/w db). The content of residual starch remaining in the commercial DDGS (5.5% w/w db) was also larger than the laboratory‐processed DDGS (1.9–2.5% w/w db). Analyses of molecular weight distribution showed that the residual starch in DDGS consisted of short‐chain amylose and amylopectin, respectively, as the major and minor components. The short‐chain amylose molecules constituted 86.5–94.1% of the residual starch. The major population of the short‐chain amyloses had an average degree of polymerization (DP) of 85, closely resembling the length of enzyme‐resistant fragments of amylose‐lipid complexes.  相似文献   

14.
A new low temperature liquefaction and saccharification enzyme STARGEN 001 (Genencor International, Palo Alto, CA) with high granular starch hydrolyzing activity was used in enzymatic dry‐grind corn process to improve recovery of germ and pericarp fiber before fermentation. Enzymatic dry‐grind corn process was compared with conventional dry‐grind corn process using STARGEN 001 with same process parameters of dry solid content, pH, temperature, enzyme and yeast usage, and time. Sugar, ethanol, glycerol and organic acid profiles, fermentation rate, ethanol and coproducts yields were investigated. Final ethanol concentration of enzymatic dry‐grind corn process was 15.5 ± 0.2% (v/v), which was 9.2% higher than conventional process. Fermentation rate was also higher for enzymatic dry‐grind corn process. Ethanol yields of enzymatic and conventional dry‐grind corn processes were 0.395 ± 0.006 and 0.417 ± 0.002 L/kg (2.65 ± 0.04 and 2.80 ± 0.01 gal/bu), respectively. Three additional coproducts, germ 8.0 ± 0.4% (db), pericarp fiber 7.7 ± 0.4% (db), and endosperm fiber 5.2 ± 0.6% (db) were produced in addition to DDGS with enzymatic dry‐grind corn process. DDGS generated from enzymatic dry‐grind corn process was 66% less than conventional process.  相似文献   

15.
Extractability and molecular modifications of gliadin and glutenin proteins withdrawn from different stages of a commercial ethanol fuel/distillers dried grains with solubles (DDGS) process using a wheat feedstock were investigated. Materials were taken postliquefaction (PL), postdistillation (whole stillage), and postdrying (DDGS) during the process and then fractionated to separate the gliadins and the soluble high‐ and low‐molecular‐weight glutenins following a modified Verbruggen extraction method. Each fraction was characterized based on the extraction efficiencies within various aqueous alcohols of propan‐1‐ol, electrophoretic patterns, intrinsic and extrinsic fluorescence, free and total sulfhydryl content, and total disulfide bond levels. Findings indicated significant changes to the composition of extracted proteins and modifications to the protein structure (i.e., surface properties and conformation) throughout the ethanol/DDGS process, beginning with the first step of production (PL, ≈83°C). Overall, processing resulted in a shift toward an unextractable gluten matrix, accompanied by increases in hydrophobicity, disulfide bridging, and excessive protein aggregation.  相似文献   

16.
该研究旨在探究豆粕、棉粕、菜粕、酒糟蛋白(Distillers Dried Grains with Solubles,DDGS)、乙醇梭菌蛋白5种蛋白原料及其混合粉料的营养指标和理化性质的差异,确定影响颗粒饲料质量和制粒能耗的关键指标,对5种蛋白原料的制粒效果进行综合评价。以豆粕为对照组,仅改变蛋白原料,采用相同的加工参数制备颗粒饲料,比较不同蛋白原料的制粒效果,进行主成分分析及偏最小二乘回归分析(Partial Least Squares Regression,PLS)。结果表明:在原料营养指标和理化特性方面,乙醇梭菌蛋白具有高蛋白含量、高蛋白溶解度、低脂肪、低纤维的特点,棉粕具有高纤维的特点,菜粕具有高纤维和低蛋白溶解度的特点,DDGS具有低蛋白和高脂肪的特点。蛋白原料吸水性强弱排列顺序为乙醇梭菌蛋白、豆粕、棉粕、菜粕、DDGS,水溶性与之相反。乙醇梭菌蛋白组和棉粕组的制粒能耗较高,豆粕组的制粒能耗最低;棉粕组和乙醇梭菌蛋白组的修正耐久性(Modified Pellet Durability Index,MPDI)较高分别为92.72%和90.57%,菜粕组的MPDI最低为79.68%;乙醇梭菌蛋白组的硬度最高为130.95N,DDGS组的硬度最低为74.26N;乙醇梭菌蛋白组的糊化度最高为45.56%,DDGS组的糊化度最低为31.36%。通过偏最小二乘回归模型得到,蛋白含量、蛋白溶解度和吸水性的增加会提高颗粒饲料硬度、PDI和MPDI;粗纤维含量、蛋白溶解度和吸水性的增加会增加制粒能耗。综合分析5种蛋白原料制粒特性,由高到低排序为乙醇梭菌蛋白、棉粕、豆粕、菜粕、DDGS。研究结果为实际生产颗粒饲料时蛋白原料的选择提供参考依据。  相似文献   

17.
Carotenoid-enriched distillers dried grain with solubles (DDGS) developed as a value-added animal feed to provide carotenoids from mono and mixed culture (Mx) fermentation of red yeasts Phaffia rhodozyma (PR) and Sporobolomyces roseus (SR) were evaluated for their nutritional composition and compared to the control (C) DDGS. Apart from providing carotenoids, all three fermentation treatments reduced fiber with best reduction of 77% in PR, enhanced crude fat with highest of 81% in Mx, and reduced protein, amino acids and nitrogen by 50% in PR. DDGS fiber reduction by 77% was achieved by P. rhodozyma in the absence of any pretreatment. Qualitative and quantitative differences in fatty acid profiles were seen among the treatments. Vaccenic acid, a monounsaturated fatty acid produced in SR and Mx fermentation, was absent in C and PR. All these nutritional modifications are highly desirable in different DDGS-based animal feeds and can be explored to obtain tailor-made feeds/feed blends for specific animal diets.  相似文献   

18.
A high‐tannin sorghum cultivar with 3.96% tannin content was used to study the effects of germination on its ethanol fermentation performance in a laboratory dry‐grind process. High‐tannin sorghum sample was germinated for 3 and 4 days. Original and germinated samples were analyzed for tannin, starch, protein, free amino nitrogen (FAN), and glucose content. Endosperm structures and flour pasting properties of germinated and nongerminated sorghum samples were examined using a scanning electron microscope (SEM) and rapid visco analyzer (RVA). Germination reduced tannin content from 3.96% to negligible levels. The free fermentable sugars (glucose, maltose, and maltotriose) in the germinated samples were significantly higher than those in the nongerminated control. Judged by the starch (starch plus dextrin) and free amino nitrogen contents in the mashed samples, germination improved degree of hydrolysis for starch by 13–20% and for protein by 5‐ to 10‐fold during mashing. Germination significantly shortened the required fermentation time for ethanol production by 24–36 hr, increased ethanol fermentation efficiency by 2.6–4.0%, and reduced the residual starch content in the distillers dried grain with solubles (DDGS) compared to the nongerminated control. Ethanol yield for the 3‐day germinated samples was 2.75 gallons/bushel, which was 3.1% higher than the 2.67 gallons for the nongerminated control. Ethanol yield for the 4‐day germinated sorghum was 2.63 gallons/bushel due to excessive loss of starch during germination.  相似文献   

19.
《Cereal Chemistry》2017,94(4):693-698
The high cost of kafirin and zein restricts their use for bioplastic and food applications. Effective, simple, and rapid kafirin/zein isolation processes are required. Here a percolation‐type aqueous ethanol solvent extraction process from coarse meals (grits) and coarse sorghum distillers dried grains and solubles (DDGS) for kafirin and zein isolation employing a low ratio of extractant to meal (2.5:1) was investigated, which is potentially applicable in the grain bioethanol industry. Postextraction filtration times were more than twice as fast using coarse meals compared with fine flours. Washing the meals prior to extraction to remove starch improved protein preparation purity to 73–85% compared with 68–72% for unwashed meals. Hence, no subsequent filtration or centrifugation step is required to clean up the kafirin/zein solution prior to solvent evaporation. With a single extraction step, kafirin/zein yields were 48% (protein basis) for DDGS and 53–70% for washed sorghum/maize meals. Cast films were used as a model bioplastic system to evaluate extracted kafirin/zein functional properties. DDGS kafirin films had rough surfaces but had the lowest water uptake and in vitro digestibility, owing to heat‐induced disulfide crosslinking during DDGS processing. Extraction by percolation using coarse meal/DDGS has potential to improve kafirin/zein viability.  相似文献   

20.
Four pearl millet genotypes were tested for their potential as raw material for fuel ethanol production in this study. Ethanol fermentation was performed both in flasks on a rotary shaker and in a 5‐L bioreactor using Saccharomyces cerevisiae (ATCC 24860). For rotary‐shaker fermentation, the final ethanol yields were 8.7–16.8% (v/v) at dry mass concentrations of 20–35%, and the ethanol fermentation efficiencies were 90.0–95.6%. Ethanol fermentation efficiency at 30% dry mass on a 5‐L bioreactor reached 94.2%, which was greater than that from fermentation in the rotary shaker (92.9%). Results showed that the fermentation efficiencies of pearl millets, on a starch basis, were comparable to those of corn and grain sorghum. Because pearl millets have greater protein and lipid contents, distillers dried grains with solubles (DDGS) from pearl millets also had greater protein content and energy levels than did DDGS from corn and grain sorghum. Therefore, pearl millets could be a potential feedstock for fuel ethanol production in areas too dry to grow corn and grain sorghum.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号