共查询到18条相似文献，搜索用时 171 毫秒
1.
运用色差仪获得了两个三角帆蚌(Hyriopsis cumingii)选育品系珍珠层颜色与外壳色的颜色参数L、a和b值,对各颜色参数进行了相关分析和回归分析,探索珍珠层颜色与外壳色之间的相关性。结果显示"紫皇后"珍珠层颜色与外壳后部颜色具有相关性,它们的L、a和b值均显著相关,相关系数分别为-0.456、0.371和-0.426,建立了"紫皇后"珍珠层对外壳后部各颜色参数的回归方程为L:y=80.49-0.53x(R~2=0.208),a:y=3.60+0.21x(R~2=0.137),b:y=4.69-0.35x(R~2=0.181);"白贵妃"珍珠层颜色与外壳后部颜色的L、a和b值显著或极显著相关,相关系数分别为-0.444、0.477和-0.390,表明"白贵妃"珍珠层颜色与外壳后部颜色显著相关,建立珍珠层对外壳后部各颜色参数的回归方程分别为L:y=87.36-0.21x(R~2=0.197),a:y=-1.77+0.23x(R~2=0.228),b:y=2.10-0.22x(R~2=0.152)。通过逐步判别分析获得了外壳色的2个参数(b和a),并构建了区分2个选育品系的判别函数:"紫皇后"的判别公式为YQ=1.786X1-0.384X2-4.440,"白贵妃"的判别公式为YW=0.321 X1+0.600 X2-4.763,综合判别率达90.0%。显示2个选育品系的外壳色差异非常明显,可通过判别分析进行可靠的区分。结果表明,对三角帆蚌外壳色的量化分析,可以对内部的珍珠层颜色进行可靠区分并进行量化推断。 相似文献
2.
三角帆蚌F5壳色及生长性状选育效果评价 总被引：2，自引：1，他引：1
以选育系紫色三角帆蚌(Hyriopsis cumingii)F_4和非选育系三角帆蚌为亲本建立后代家系群体,比较选育组与对照组贝壳珍珠质颜色和生长性状,以评价F5贝壳珍珠质层颜色与生长性能选育效果。结果显示,选育组明度L*、饱和度C*、色差值d E*与对照组差异极显著(P0.01),选育组明度L*比对照组低17.13%,饱和度C*高于对照组20.55%,色差值d E*高于对照组22.56%,表明选育组贝壳珍珠质层颜色较对照组颜色更深,色彩更丰富。选育组左右两侧贝壳珍珠质层颜色参数–L*、d E*从前端至后端逐渐增大,表明贝壳珍珠质层颜色逐渐加深,对照组前端至后端变化规律与其不同。选育组与对照组左右贝壳相同位置处,贝壳珍珠质层颜色参数均无显著性差异(P0.05)。选育组各生长性状均显著高于对照组(P0.05),壳长、壳高、壳宽、体重分别高于对照组12.30%、9.95%、8.60%、36.34%。对贝壳珍珠质层颜色参数与生长指标综合评定值联合分析发现,B2、B4、B5、B6、B3家系最优,贝壳珍珠质层颜色深,并具有较强生长优势,可用于进一步选育与推广。通过对贝壳珍珠质层颜色和生长性状相关性分析发现,选育组内壳珍珠质层各颜色参数与生长性状之间相关系数较低,相关程度极弱,无法通过生长性状间接选择贝壳珍珠质颜色。 相似文献
3.
合浦珠母贝全同胞家系贝壳珍珠质颜色分析 总被引：2，自引：0，他引：2
合浦珠母贝（Pinctada fucata）小片贝的珍珠质颜色直接影响育珠贝所产珍珠的颜色。每个合浦珠母贝的珍珠质颜色都有自己的颜色特征值,即三刺激值和颜色参数。试验选择16个合浦珠母贝全同胞家系,用CSE成像分析色度系统测量并比较各家系左壳内侧外缘珍珠质颜色参数Lab和三刺激值,以筛选适合做插核小片贝的家系。珍珠质的颜色参数明度（L）为98.586～105.234,其中F16家系的明度最大,F3家系的明度最小;a（红绿色品）为-0.967～-6.577,b（黄蓝色品）为5.915～11.237,F14家系色品最偏向于绿色（-a）,F16家系色品最偏向于黄色（b）。F3和F14家系贝壳外缘珍珠质的色差（ΔEab）最大（7.885）,肉眼能明显觉察。16个家系的合浦珠母贝都属于白色系列,其中离白光中心最近（a2＋b2最小）且个体颜色集中的F1家系最适合用作小片贝来选育培养。 相似文献
4.
<正> 国家水产总局南海水产研究所与广东海南陵水县海陵珍珠养殖场合作,进行白蝶贝培育大型珍珠的技术研究,于1982年8月27日再次培育出我国第二颗大型商品珍珠,这颗珍珠直径为15.0×14.7毫米,重量为4.5克,形状近似圆形,表面光滑呈金银色,光泽美丽,是一颗高质量的 相似文献
5.
为探讨不同环境对珍珠质颜色的影响,本研究将遗传背景相同的马氏珠母贝分布于海南黎安、广东流沙、广西北海和广西防城4个不同的海区养殖.一年后,用CSE-1型成像色度仪测量4个区域贝壳珍珠质的颜色,记录相应的颜色参数Lab值.结果显示,不同海域养殖的贝壳珍珠质颜色显示了不同的特征,其中广西北海、广西防城和海南黎安这3组贝壳珍珠质颜色较为接近,均表现为明度高、偏黄绿;而广东流沙与这3个地区的色差较大,表现为明度低、黄绿杂色浅、偏白色的特征. 相似文献
6.
目前造形珍珠尚无统一的质量标准,因此在生产供销过程中便缺乏可循的依据。所以必需研究建立一个和市场需求相适应的、简便易行的质量检测标准。关于造形珍珠的质量评判可以从以下几方面综合考虑。 (1)表面光洁度:可以从造形珍珠珠层的均匀程度以及光泽亮度来考虑。这是首要标准,否则将失去其商品价值。 (2)珍珠层厚度:应以造形珍珠形象中最凸出的部位为标准,因为该部位的珍珠层相对较薄。必须研究出一种不破坏珍珠形象就能测试珍珠层厚度的方法。 相似文献
7.
通过x射线粉晶衍射（XRD）、场发射扫描电镜（FE—SEM）对不同颜色的淡水养殖珍珠的微结构进行较系统研究。结果表明,质优的珍珠其矿物相为文石,未见有方解石或球文石相,不同颜色的珍珠质层文石板片的厚度存在较大差异。质量较好的珍珠中接近珍珠核心区域存在棱柱层,该棱柱层由众多的纤维或条带状文石结晶体聚集而成,其中文石纤维或条带的定向近平行于珍珠层文石板片。此外,首次发现在淡水养殖珍珠的棱柱层中文石纤维与板片结晶体交替出现,同时初步建立了一种新的淡水养殖珍珠的内部结构模型。 相似文献
8.
贝龄对马氏珠母贝植核贝生长、成活率和育珠性状的影响 总被引：6，自引：1，他引：5
以马氏珠母贝(Pinctada martensii)速长系F2为材料,分析了贝龄对植核贝生长、成活率和育珠性状影响。实验设2.0龄贝植核组(A)、2.0龄贝对照组(B),1.5龄贝植核组(C)和1.5龄贝对照组(D),按照常规技术进行插核手术与海区养殖,育珠期为450 d。在插核后第15、30、60、180、270和450天,比较各组的平均体质量和成活率差异;在插核后270 d和450 d,比较A和C组留核率、珍珠层厚度、优质珠率和珍珠产量的差异。结果表明,在插核后第15、30、60、180和270和450天,4个组的平均体质量和成活率均存在显著性差异(P<0.05),C和D组的成活率显著大于A和B组(P<0.05),C和D组的体质量日增长率显著大于A和B组(P<0.05)。在插核后第270天,A和C组的留核率、珍珠层厚度和珍珠产量均存在显著性差异(P<0.05),A和C组间优质珠率差异不显著(P>0.05);在插核后第450天,C组留核率、珍珠厚度、优质珠率和珍珠产量均显著大于A组(P<0.05)。结论认为,利用低龄贝进行插核育珠明显提高植核贝的留核率、成活率和珍珠层厚度,从而能够提高珍珠质量。本研究旨在为合理设计马氏珠母贝的养殖模式提供科学依据。 相似文献
9.
10.
<正>一、培育技术1.育珠蚌种选择为生产淡水优质珍珠,江西抚州洪门水库开发有限公司于1997年底成功地从日本引进了池蝶蚌原种,并于1998年繁殖成功。池蝶蚌原产日本琵琶湖,日本以该蚌培育优质淡水珍珠产品享誉世界珍珠市场。经过近十年研究,池蝶蚌的壳宽是三角帆蚌的1.23倍,外套膜的厚度是三角帆蚌的1.78倍,贝壳珍珠层的厚度是三角帆蚌的2.08倍,珍珠生长速度是三角帆蚌的1.62倍,大规格、优质珍珠的比例是三角帆 相似文献
11.
Comparison of harvested rate and nacre deposition parameters between cultured pearls issued from initial graft and second nucleus insertion in P. margaritifera 
下载免费PDF全文
下载免费PDF全文 Cultured pearls produced with Pinctada margaritifera, using the surgreffe method (implantation of a second nucleus following pearl harvest) were studied for the first time to: (1) examine family effect on nacre thickness, nacre weight and nacre deposition speed and (2) compare variation in these three traits with that obtained from the cultured pearls previously harvested after the corresponding initial grafts. A surgreffe experiment using 783 recipient oysters was realized in Rangiroa atoll (French Polynesia). After 24 months of culture, 389 cultured pearls were harvested. Significant donor family effect was found for the harvested pearl rate from surgreffe (P = 0.046). Highly significant donor family effect was recorded for nacre thickness (P = 0.004). Very highly significant donor family effects were recorded for nacre weight and nacre deposition speed (P < 0.0001). Comparison between surgreffe and initial graft showed: (1) no significant effect for the average cultured pearl rate harvested (P = 0.052) and average cultured pearl nacre deposition speed (P = 0.622) and (2) very highly significant differences (P < 0.0001) for the average cultured pearl nacre thickness and nacre weight. This study highlighted three major implications for pearl industry management: (1) donor family effect was maintained from initial graft to surgreffe, for nacre thickness, weight and deposition speed, (2) the persistence of the pearl sac metabolic activity over three years of culture and (3) the relation between harvested pearl rate and the size of the nucleus inserted in the pearl sac. 相似文献
12.
Carole Blay Manaarii Sham-Koua Vincent Vonau Roger Tetumu Philippe Cabral Chin-Long Ky 《Aquaculture International》2014,22(2):937-953
Cultured pearl nacre deposition rate in Pinctada margaritifera oysters was studied to examine its influence on Tahitian classification grade and colour and to further our understanding of using selected donor oysters produced in a hatchery system for the improvement of these traits. A large-scale grafting experiment using 150 farmed donor oysters was realised in Rangiroa atoll (French Polynesia). After 18 months of culture, 874 pearls were harvested and 7 pearls quality traits were recorded: (1) nacre deposition rate assessed by nacre thickness and weight, (2) classification grade, lustre and surface defects, and (3) colour assessed by pearl colour darkness level and visual colour categories. Nacre deposition rate significantly influence pearl grade, surface defects, darkness level and colour categories, but not the lustre. Grade A pearls had the thickest and heaviest nacre on average, compared with grade D pearls and rejects. In addition, pearls without any surface defect had thicker and heavier nacre. Pearls with low darkness were the thinnest and the lightest. Pearls of aubergine–peacock secondary colours were the thickest and the heaviest. These results highlight the importance of rapid nacre deposition rate for increasing the production of grade A pearls, with less surface defects and dominance of a black tone colour. Fast nacre deposition may, however, have a negative impact on other pearl quality traits, such as pearl lustre. This study demonstrates the importance of examining relationships between pearl quality traits in a way that provides solid information that can be directly used for breeding and genetic selection programmes. 相似文献
13.
Freshwater nucleated pearl quality is influenced by host mussel growth traits in Hyriopsis cumingii 下载免费PDF全文
下载免费PDF全文 Hyriopsis cumingii is one of the most important freshwater pearl mussels in China. Recently, this species can produce freshwater nucleated pearls of high quality. Here, we investigated whether nucleated pearl quality is influenced by the growth traits of the host mussel or other factors like cultivation period. We implanted host mussels with a spherical nucleus consisting of a small piece of mantle tissue from donor mussels. After 24 and 36 months of culture, host mussel growth traits including body weight and shell length, height, width and weight were recorded. These factors were then correlated with the quality traits of the pearls they produced, such as nacre thickness, size, weight, lustre and colour. Results indicated pearls obtained at 36 months after seeding were significantly larger in terms of nacre thickness, size and weight compared to those harvested at 24 months. In particular, nacre thickness (r = 0.33–0.48, P = 0.00), pearl size (r = 0.39–0.43, P = 0.00) and pearl weight (r = 0.35–0.47, P = 0.00) were showed to be significantly correlated with host mussels shell length, body weight and shell weight at 24 or 36 months. Larger and heavier host mussels tended to produce bigger pearls. In contrast, host mussels did not affect pearl colour. Cumulatively, our results suggest that longer culturing times and a larger host mussel may help produce better quality nucleated pearl. This information can help guide selective breeding programs designed to improve pearl quality produced by H. cumingii. 相似文献
14.
三角帆蚌生长性状和内壳色与所产无核珍珠质量的相关性分析 总被引：8，自引：6，他引：2
为了研究供片蚌和育珠蚌对无核珍珠质量的影响,以三角帆蚌紫色选育系F5为材料,在插植无核珍珠前,测量了供片蚌和育珠蚌的壳长、壳高、壳宽、体质量等生长性状,检测了供片蚌内壳色颜色参数L、a、b、dE。经过18个月育珠,测量了育珠蚌的壳长、壳高、壳宽、体质量,计算其特定生长率,检测了育珠蚌内壳色颜色参数L、a、b、dE,测量了育珠蚌所产无核珍珠的颜色、大小、圆度、光泽和产珠量。结果发现,供片蚌生长性状与所产无核珍珠大小、圆度和产珠量相关性不显著(P>0.05)。供片蚌内壳色与无核珍珠颜色相关性极显著(r=-0.400~0.376,P<0.01),供片蚌dE值越大所产紫色珍珠比例越高、dE值越小所产白色珍珠比例越高。育珠蚌特定生长率与所产无核珍珠大小、光泽和产珠量相关性极显著(r=0.237~0.516,P<0.01),相关程度为体重> 壳长> 壳宽> 壳高,育珠蚌特定生长率与所产无核珍珠圆度相关性极显著(r=-0.284~-0.256,P<0.01),相关程度为壳长>体质量>壳宽>壳高。育珠蚌内壳色与所产无核珍珠颜色、大小、圆度、光泽和产珠量相关性不显著(P>0.05)。综合各性状相关性分析,改良供片蚌内壳色可以改良珍珠颜色,改良育珠蚌的生长性状可以改良珍珠大小、光泽、圆度和产珠量。 相似文献
15.
Gu Zhifeng Huang Fengshao Wang Hai Gan Kai Zhan Xin Shi Yaohua Wang Aiming 《Aquaculture Research》2014,45(7):1126-1132
Cultured free round pearls are produced by implanting a spherical nucleus with a small piece of nacre‐secreting mantle graft from a donor oyster into the gonad of a recipient oyster (host). To examine the possible contribution of host and donor oysters to the colouration of the harvested pearls, the CSE‐1 Imaging and Color‐Measuring System were used to quantitatively measure the L*a*b* values of donor and host shells and the produced pearls in Pinctada martensii. Results showed that the colour of pearls had significant positive correlation (r = 0.1–0.22, P = 0.00) with that of donors, but had no correlation with that of host oysters, thus convincingly confirmed the contribution of nacre colour of donor to the realization of pearl quality of colour. To further clarify the relationship between the donor and the pearl colour, the donors from pearls of good and poor colour quality were further compared and the results demonstrated the significant difference in L* values (P < 0.05) and insignificant difference in a* and b* values, suggesting the necessity of selecting donors with bright and lustrous nacre in pearl production. 相似文献
16.
Donor effect on cultured pearl nacre development and shell matrix gene expression in Pinctada margaritifera reared in different field sites 下载免费PDF全文
下载免费PDF全文 Chin‐Long Ky Floriane Broustal Manaarii Sham Koua Virgile Quillien Benoît Beliaeff 《Aquaculture Research》2018,49(5):1934-1943
Understanding the respective roles played by donor and recipient pearl oysters in pearl quality determination in relation to the environment is a challenge for the pearl industry. In most Pinctada species, pearl size is mainly related to recipient oyster growth performance but also relies to some extent on the biomineralisation activity of the pearl sac, a tissue that originates from the donor oyster mantle. We examined donor effect on pearl size in response to culture in the lagoons on Arutua and Apataki atolls. Overall, nacre weight and thickness were greater in Arutua than in Apataki, but sensitivity to the environment differed between donors. Some donors were associated with significantly heavier and thicker nacre in Arutua (I group), while others had similar results at the two sites (NI group). On average, up to 20% of the pearl size could be attributed to the donor but, in group I, donor effect was responsible for up to 36% of nacre weight determination. Additionally, a real‐time PCR expression study of eight matrix protein genes related to biomineralisation in the pearl sac showed that MSI60, pearlin and pif177 were significantly and positively correlated with nacre weight and thickness, with the latter two genes explaining the larger pearl size observed in Arutua. Donor oysters in P. margaritifera therefore play a key role in pearl size improvement, related to the role of the shell matrix protein genes. Understanding such contributions could help in the design of genetic selection plans for specific and adapted donor oyster lines. 相似文献
17.
The durability of Akoya pearls is closely related to the mechanical strength of the nacre. Therefore, obtaining information about the mechanical strength of the nacre is very important in the quality control of pearls. The nacre of Akoya pearls is composed of aragonite contained within an organic matrix. The presence of the organic matrix provides mechanical strength and fracture toughness much higher than that of monolithic aragonite. In this study, we investigated the hardness and delamination strength of Akoya cultured pearls classified into four levels by “Gray Value (GV)”, a score given by a non-destructive inspection method based on UV fluorescence intensity that provides an indication of the condition of the nacre’s organic components. Pearl hardness decreased significantly with decreasing GV. Furthermore, delamination strength of the pearl surface layer was very low when the GV was very low. These results suggest that the GV indirectly represents the mechanical strength of the nacre and could be used as a non-destructive quality-control method to maintain the quality of pearls used as jewelry.
相似文献18.
Phenotypic indicators for cultured pearl size improvement in the black‐lipped pearl oyster (Pinctada margaritifera): towards selection for the recipient growth performance 下载免费PDF全文
下载免费PDF全文 The black‐lipped pearl oyster, Pinctada margaritifera, is the most important farmed species in French Polynesia and the basis of the most valuable export industry. Mass production of black pearls relies on a surgical operation requiring tissue from a donor pearl oyster to be grafted, together with a nucleus made of shell, into the gonad of a recipient oyster. Improving pearl size through family selection remains one of the main challenges for future aquaculture development. This study analyses the relative contribution of donor and recipient oysters to pearl size. To this end, hatchery‐produced donor oysters of two batches, large and small (based on shell height), were used to supply grafts for recipients, which were then monitored individually for their growth performance by recording shell height, width, and thickness, and total live weight (flesh + shells) every 6 months (four biometric measurement times) over 20 months of culture. Pearls issued from the two batches of donors showed no significant differences in nacre weight or thickness. In contrast, recipient oyster shell height and total weight were increasingly positively correlated with these pearl size parameters over the culture period, becoming significant at 8 months post‐grafting. Potential therefore exists to use shell height and oyster weight as phenotypic indicators for selective breeding of recipient oysters with high growth performance to increase pearl size in P. margaritifera. 相似文献